[Z06] H/C/I Done with results
#1
Instructor
Thread Starter
H/C/I Done with results
Hey Guys and Gals,
I have a 2008 VR Chevy Corvette Zo6 that I recently did a heads cam. Just thought I would share the results!
Mods:
Custom Ground Comp Cam
Darin Morgan heads bought from RamAir972003
LG 1 7/8'' headers with no cats
LS7 lifters
Halltech MF103
Vengeance Ported Fast 102
Stock TB
Tuned by Brian at Dynotune Motor sports in Columbus Ohio
The only dyno graph I could find at home reads in STD and was before my tuner polished the top end, best SAE corrected run was 577rwhp.
The fluctuations on the graph are dyno coupling related according to my tuner.
Also not to sure on the rules on the forum regarding trips to mexico, so I put together a little video for you guys
I have a 2008 VR Chevy Corvette Zo6 that I recently did a heads cam. Just thought I would share the results!
Mods:
Custom Ground Comp Cam
Darin Morgan heads bought from RamAir972003
LG 1 7/8'' headers with no cats
LS7 lifters
Halltech MF103
Vengeance Ported Fast 102
Stock TB
Tuned by Brian at Dynotune Motor sports in Columbus Ohio
The only dyno graph I could find at home reads in STD and was before my tuner polished the top end, best SAE corrected run was 577rwhp.
The fluctuations on the graph are dyno coupling related according to my tuner.
Also not to sure on the rules on the forum regarding trips to mexico, so I put together a little video for you guys
Last edited by CleVette1; 06-22-2017 at 12:23 PM.
The following users liked this post:
Landru (06-23-2017)
#3
Instructor
Thread Starter
#4
Drifting
Nice! Loved the vid. Guy got excited at the end, huh?
#5
Instructor
Thread Starter
#7
Banned Scam/Spammer
best part of the video, THEY GOING AT IT, THEY GOING AT IT, GAWWWWD DAMN
#9
Instructor
Thread Starter
The run with the C7 was spin city for me until I got out of 2nd. It started slightly drizzling as the run began lol
My Favorite part as well
Thanks again Buddy the car really breaths well at the top end!!
Thanks again Buddy the car really breaths well at the top end!!
Last edited by CleVette1; 06-23-2017 at 10:42 AM.
#11
Drifting
I guess I'll be the first... congrats on the motor work, but I'm not a fan of you racing on what look to be on far too crowded streets. In any case, I suggest that you do a better edit job on your video, because your license plate number is clearly visible in some frames early in the video, where the car is sitting on what is presumably your driveway.
Last edited by nuke61; 06-23-2017 at 11:18 AM.
#12
Instructor
Thread Starter
I guess I'll be the first... congrats on the motor work, but I'm not a fan of you racing on what look to be on far too crowded streets. In any case, I suggest that you do a better edit job on your video, because your license plate number is clearly visible in some frames early in the video, where the car is sitting on what is presumably your driveway.
The following users liked this post:
nuke61 (06-23-2017)
#16
Instructor
Thread Starter
Thank you
I have a friend who builds LSX Drift cars do the install for me. And I recommend Brian for the tune he really knows what he's doing.
#18
Le Mans Master
Nice build results.
#20
Instructor
Thread Starter
Its a custom ground comp Cam I got from a forum member here 239/255 .661/.661 I don't remember lsa.... she's a big girl
Last edited by CleVette1; 06-25-2017 at 08:21 PM.