When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
[Z06] Wheel Spacers - AMT Motorsport - FREE SHIPPING
C6 Corvette ZR1 & Z06General info about GM’s Corvette Supercar, LS9 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
Sometimes only the best will do, and Wheel Spacers is one of those
times. AMT Motorsport Wheel Spacers are Milled to 0.0005 tolerance
and only weight 1.0 and 1.2 pounds each. Improve the stance and
lower the center of gravity in your C6 Corvette with a set of Hubcentric
3/4" or 1" Wheel Spacers from CCA and get FREE SHIPPING in the US or Choose the New 1/4" or 3/8" Spacers
Here is my vette with 20mm adapters up front and 10mm spacers in the rear with 345 nitto invos. My question is, can i get around 10mm spacers with a hub centric lip? I dont see it happening but it would be nice.
Here is my vette with 20mm adapters up front and 10mm spacers in the rear with 345 nitto invos. My question is, can i get around 10mm spacers with a hub centric lip? I dont see it happening but it would be nice.
Afraid not - the length of the lip on the stock hub dictates the minimum thickness for a hub centric lip. About 5/8" is the minimum thickness before you can add a hubcentric lip.
By widening the track of the vehicle the vehicle mass is now being dispersed over a wider footprint, essentially lowering the center of gravity. I can do the math for your if you like. It's not drastic, but it's something.
By widening the track of the vehicle the vehicle mass is now being dispersed over a wider footprint, essentially lowering the center of gravity. I can do the math for your if you like. It's not drastic, but it's something.
07-31-2017, 07:04 PM
Wheel Spacers - AMT Motorsport - FREE SHIPPING
