When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
C6 Corvette ZR1 & Z06General info about GM’s Corvette Supercar, LS9 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
Did they tell you what they felt caused the problem? Just in case it happens to someone else and they are doing a search.
I did not get to talk to the tech who rebuilt the clutch unfortunately. All I know is that they replaced the friction material, the PP, the floater plate it looks, and they resurfaced the flywheel. The only thing that is different is the older deisgn billet carrier that mounts to your flywheel is replaced and completely different looking. I am guessing maybe that was the issue as the old one had no issues. Why else would you replace that part at no extra cost to me?
Ultimately heat killed that clutch but the way I was using it should not have taken it to that point from my experience with others in heavier platforms.
11-22-2017, 06:50 PM
