C6 Z06 cam/head recommendations for occassional daily/weekend warrior
12-12-2017, 03:09 AM
#41
Supporting Vendor
Member Since: Sep 2013
Location: Harbor City California
Posts: 2,817
Received 1,012 Likes
on
533 Posts
It was nice speaking with you the other evening.
They ended up not being able to use our Moldstar90 valve guides in the PRC heads.
We were told the ID of the guide bore in the PRC head was to large for our stock diameter (OD) Moldstar90 valve guides.
With that said we make these guides right here so we can make them to any specific size a customer is looking for. In short our guides can be made to fit in a PRC head but we just need to know the head guide bore ID size.
http://www.americanheritageperformance.com/
310-326-2399
They ended up not being able to use our Moldstar90 valve guides in the PRC heads.
We were told the ID of the guide bore in the PRC head was to large for our stock diameter (OD) Moldstar90 valve guides.
With that said we make these guides right here so we can make them to any specific size a customer is looking for. In short our guides can be made to fit in a PRC head but we just need to know the head guide bore ID size.
http://www.americanheritageperformance.com/
310-326-2399
Last edited by American Heritage; 12-12-2017 at 03:11 AM.
The following users liked this post:
Undy (12-12-2017)