BTR stage 2 cam results
#1
Racer
Thread Starter
BTR stage 2 cam results
Picked up the car yesterday from Cordes performance racing (CPR) and am very taken away at the results. I drove home in typical Friday 5 oclock traffic and it was very well mannered. it drives very easy with minimal effort over stock, it almost feels stockish aside from all the noise and rocking/thumping the cam makes. I got LOTS of looks and a couple thumbs up on my drive home. because of traffic I didn't really get to get on it very much, plus I'm still on 325 Michelin pilot sports. the car does scream though. I gave it the goose in 2nd gear at like 3k rpms and it threw me back pretty hard. stock IM/TB along with 91 are holding it back some, but a MSD/102 and flex fuel are certainly in it's future.
stock baseline was 436/414
Mods:
WCCH heads ported and milled (.30)
BTR stage 2 cam
ARH 2" catless headers
Airaid CAI
staright pipe/muffler delete
after was on same dyno
made 543/494
stock baseline was 436/414
Mods:
WCCH heads ported and milled (.30)
BTR stage 2 cam
ARH 2" catless headers
Airaid CAI
staright pipe/muffler delete
after was on same dyno
made 543/494
Last edited by Sean_C; 11-13-2017 at 06:20 PM.
#3
Team Owner
Car looked great
#4
Racer
Thread Starter
The following users liked this post:
Sean_C (11-13-2017)
The following users liked this post:
Sean_C (11-13-2017)
#7
Supporting Vendor
Pleasure working with you sir! Thank you so much for trusting us with your car
__________________
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
The following users liked this post:
Sean_C (11-13-2017)
#8
Race Director
Member Since: Mar 2006
Location: Everywhere and Nowhere at all
Posts: 15,357
Received 1,679 Likes
on
1,135 Posts
Read nothing but good things about CPR... A lot of fast cars out of AZ... Very nice.
The following 2 users liked this post by TXGS507:
Cordes Performance Racing (11-12-2017),
Sean_C (11-13-2017)
#9
Team Owner
Solid results without having to go crazy on the cam. I like it!
The following users liked this post:
Sean_C (11-13-2017)
#10
Drifting
I have a custom cam with very similar specs to the BTR 2 and made about 560 with throttle body and intake. Rides just like you said - almost like stock but the cam lope and shake is awesome! Great work! Enjoy!
The following users liked this post:
Sean_C (11-13-2017)
The following users liked this post:
Sean_C (11-13-2017)
#12
Racer
Thread Starter
thank you!!
Last edited by Sean_C; 11-13-2017 at 10:44 AM.
#13
Outstanding !!!!
Great to see all these Z06's in the greater valley showing up
Great to see all these Z06's in the greater valley showing up
The following users liked this post:
Sean_C (11-13-2017)
#14
Nice! I just got mine back from DRM. BTR2, PRC 265 heads (were already on the car), halltech mf103, ported stock TB, stock IM, ARH 1-7/8” catted through B&B Bullets. Dynojet at 541whp and 502 whtq. On 91 with 10% ethanol. No prior dyno there as the motor was hurt when i brought it in. Im thrilled. I have the same thoughts of an MSD and NW combo looking for 560whp +.
#16
#17
Thanks for the post OP. Do you live in Phoenix? I am considering a H/C/I through Joe for my c6z but I’d love a ride to see and hear/seat of the pants feel what I’m paying for......any chance we could meet up sometime in the next few weeks?
#19
Racer
Thread Starter
I'm in Chandler....I go to the pavilions in Scottsdale pretty frequently.... I don't know if u know what it is, but it's a big car show every Saturday with all makes and models up by talking stick resort.
#20
Race Director
Nice power from a mild cam. Joe and his CPR crew do good work. I'm guessing your idle is set down in the 750-800 rpm range?