Replaced Pushrods stockers are poor
#1
Instructor
Thread Starter
Replaced Pushrods stockers are poor
Put Texas speed chrome moly 3/8 pushrods to replace the stock pushrods as part of my tweeking before heading to the dyno in the spring. In the process I put the stock pushrod in a lathe and checked it for straightness and it is good the problem with the stock pushrod is the ends are not welded on concentric to the centerline of the pushrod on the first one I checked it is out .035 in roundness to the centerline. In my humble opinion this is not acceptable, any way the $109. at Texas speed I deem well spent. Internals on my engine are stock, comp cams trunion upgrade, MSD intake, JBA tri-Y headers can't wait for spring to see how it does.