Throttle body code
08-22-2018, 07:13 AM
#1
1st Gear
Thread Starter
Member Since: Aug 2018
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Throttle body code
My 08 Z06 has started with a very rough idle 2 times in the last 2 weeks. Checked the code which indicated a throttle body malfunction. Cleaned throttle body after first code but then it happened again. After 5 min of rest...no issue only a check engine light. Has anyone else ever had this happen? If so any insight or solution?
Car is stock except for CAI.
At idle, the car was rocking like it had a huge CAM and jumping back and forth from 750-1k RPM. Display indicated "Engine Power Loss" and the traction control light came on at the same time.
Car is stock except for CAI.
At idle, the car was rocking like it had a huge CAM and jumping back and forth from 750-1k RPM. Display indicated "Engine Power Loss" and the traction control light came on at the same time.
08-22-2018, 08:11 AM
#2
Melting Slicks
It could be in the wiring make sure the connector and the wires are pushed in there. I had to rebuild my connector.
08-22-2018, 09:45 AM
#3
Instructor
I had the same problem with my NW throttle body. Turned out the throttle body motor was bad. Swapped out the motor with a stock one and no problem so far after 900 miles.