[Z06] Mileage on your modded z06
02-02-2018, 08:06 PM
#1
Mileage on your modded z06
Heyy guys, what mileage do you have on your modded z06 curious and think it could be a stress relief for some people. Has to be modded and a ls7 no after market blocks or bottom
end. so people can get an idea on how long these cars can last with certain mods and power.
here is mine
2008 c6 z06
mods began at 20500 miles to 24500 miles total of 4K miles in a short amount of time and lots of beating
Fuel:91 California octane
Mods AHP ported heads mill .030
BTR 4 cam New revised 112LS not the old 111
.7775pushrods I’m pretty sure it has a 7 in front forgot oh well
b and b headers 1 7/8
stock h pipe
stock exhuast with muffler mod
ported msd intake
nw 102TB
haltech intake 108
matt gower injectors
add a picture of you car too! Thought this could be useful and cool to give people some
insight on how long these ls7s last and what they put down for power.
606whp 534trq at stark weather performance dynojet 224 new one he said only two years old
was on STD smoothing 5
problems:
starter gets overheated
valvetrain is allot louder
end. so people can get an idea on how long these cars can last with certain mods and power.
here is mine
2008 c6 z06
mods began at 20500 miles to 24500 miles total of 4K miles in a short amount of time and lots of beating
Fuel:91 California octane
Mods AHP ported heads mill .030
BTR 4 cam New revised 112LS not the old 111
.7775pushrods I’m pretty sure it has a 7 in front forgot oh well
b and b headers 1 7/8
stock h pipe
stock exhuast with muffler mod
ported msd intake
nw 102TB
haltech intake 108
matt gower injectors
add a picture of you car too! Thought this could be useful and cool to give people some
insight on how long these ls7s last and what they put down for power.
606whp 534trq at stark weather performance dynojet 224 new one he said only two years old
was on STD smoothing 5
problems:
starter gets overheated
valvetrain is allot louder
Last edited by 427V8BB; 02-04-2018 at 09:27 AM.
02-03-2018, 08:16 PM
#2
Team Owner
Heyy guys, what mileage do you have on your modded z06 curious and think it could be a stress relief for some people. Has to be modded and a ls7 no after market blocks or bottom
end. so people can get an idea on how long these cars can last with certain mods and power.
here is mine
2008 c6 z06
mods began at 20500 miles to 24500 miles total of 4K miles in a short amount of time and lots of beating
Fuel:91 California octane
Mods AHP ported heads mill .030
BTR 4 cam New revised 112LS not the old 111
.7775pushrods I’m pretty sure it has a 7 in front forgot oh well
b and b headers 1 7/8
stock h pipe
stock exhuast with muffler mod
ported msd intake
nw 102TB
haltech intake 108
add a picture of you car too! Thought this could be useful and cool to give people some
insight on how long these ls7s last and what they put down for power.
606whp 534trq at stark weather performance dynojet 224 new one he said only two years old
was on STD smoothing 5
end. so people can get an idea on how long these cars can last with certain mods and power.
here is mine
2008 c6 z06
mods began at 20500 miles to 24500 miles total of 4K miles in a short amount of time and lots of beating
Fuel:91 California octane
Mods AHP ported heads mill .030
BTR 4 cam New revised 112LS not the old 111
.7775pushrods I’m pretty sure it has a 7 in front forgot oh well
b and b headers 1 7/8
stock h pipe
stock exhuast with muffler mod
ported msd intake
nw 102TB
haltech intake 108
add a picture of you car too! Thought this could be useful and cool to give people some
insight on how long these ls7s last and what they put down for power.
606whp 534trq at stark weather performance dynojet 224 new one he said only two years old
was on STD smoothing 5
DH
The following users liked this post:
427V8BB (02-04-2018)
The following users liked this post:
427V8BB (02-04-2018)
02-03-2018, 11:49 PM
#4
Race Director
600whp. 10K miles since build, 56K miles total
The following users liked this post:
427V8BB (02-04-2018)
02-04-2018, 02:22 AM
#5
Le Mans Master
2006...build done at 43k, now at 58k. Work done by Quality Motorsports, Lewisville, Tx.
Cam
new heads (no porting or polishing)
AR long tube headers
CAI
Tune
524.7 rwhp
Absolutely no problems.
Cam
new heads (no porting or polishing)
AR long tube headers
CAI
Tune
524.7 rwhp
Absolutely no problems.
The following users liked this post:
427V8BB (02-04-2018)
The following users liked this post:
427V8BB (02-04-2018)
02-04-2018, 09:28 AM
#7
The following users liked this post:
427V8BB (02-04-2018)
02-04-2018, 11:36 AM
#9
New brakes. still factory clutch. It is getting a little weak though. Wish I had Undy's torque. lol Am going to get a throttle body and MSD intake or port the factory one. Maybe that will help my torque. It is only around 490 now.
Last edited by lbzraptor; 02-04-2018 at 11:40 AM.
02-04-2018, 02:50 PM
#10
Race Director
I will have a used MSD intake with about 10K miles on it available around the end of March.
02-04-2018, 04:02 PM
#11
Team Owner
02-04-2018, 04:17 PM
#12
Race Director
02-04-2018, 06:00 PM
#14
Safety Car
2007 76,000 total mile, 40,000 on head, cam, header set up. Work done by Boos Performance. WCCH heads.
560 to 580 rwhp depending on dyno. 50+ track day.
12 to 1 compression ratio. .660 cam lift. Stock rockers and lifters.
560 to 580 rwhp depending on dyno. 50+ track day.
12 to 1 compression ratio. .660 cam lift. Stock rockers and lifters.
The following users liked this post:
Cone killer (09-11-2023)
02-04-2018, 06:46 PM
#15
thats insane!
Whats your maintinace and procedures?
wait till 150 oil temp to romp on it ?
change oil every 3k miles?
add in additives?
93 octane?
02-04-2018, 07:18 PM
#16
Team Owner
Not stock motor, but 27k miles now on 1000-1200rwhp.
02-04-2018, 08:49 PM
#17
Safety Car
On this motor, my oil at 4000 miles is still golden colored. The only oiling upgrade is the larger Lingenfelter dry sump tank. Car sees big lateral Gs. Coilovers, heim jointed suspension, sway bar upgrade, aero, running on slicks. No oil starvation so far.
02-05-2018, 08:46 AM
#19
Le Mans Master
Bone stock till 32k miles. Currently at 40k and climbing every day.
LPE Ported Stock Casting Heads
.050" Mill (12:1+ compression)
OEM Intake Valves
Ferrea Exhaust Valves
BTR .660 Springs
Morel Drop-In Lifters
TSP 4.2 Cam (.656/.656 Lift)
Mamo Ported MSD
NW102 TB
ID1000s
Flex Fuel (E85 primarily)
Vararam Intake
ARH 1-7/8" Headers
Taylor Wires
Monster LT1-S Clutch
607whp and 537wtq
750+whp and 700+wtq on a DRY 150 shot of nitrous. Only have 2 bottles through it so far.
Driven daily to work and beat on at least once a week.
LPE Ported Stock Casting Heads
.050" Mill (12:1+ compression)
OEM Intake Valves
Ferrea Exhaust Valves
BTR .660 Springs
Morel Drop-In Lifters
TSP 4.2 Cam (.656/.656 Lift)
Mamo Ported MSD
NW102 TB
ID1000s
Flex Fuel (E85 primarily)
Vararam Intake
ARH 1-7/8" Headers
Taylor Wires
Monster LT1-S Clutch
607whp and 537wtq
750+whp and 700+wtq on a DRY 150 shot of nitrous. Only have 2 bottles through it so far.
Driven daily to work and beat on at least once a week.
The following users liked this post:
Cone killer (09-11-2023)
02-05-2018, 10:22 AM
#20
Race Director
Member Since: Mar 2006
Location: Everywhere and Nowhere at all
Posts: 15,357
Received 1,679 Likes
on
1,135 Posts
08 Z.. Purchased bone stock w 22K 1 yr ago... Added H/C/I/E within the first month of ownership. VR Kaotic cam,AHP heads,LG 1 7/8, FAST 102, ATI super damper, NW 102, Akrapovich catback.. 560 to the tires. Mileage is now 27K...
The following users liked this post:
427V8BB (02-05-2018)