Mild to Wild
#2
Racer
If you search mild to wild DIY, there's a writeup that I used for my last Z that was super simple, and cost less than $5 if I remember...it's a fuse and a switch of your choice. I placed a round switch where the cigarette lighter was since I'd never used it or planned to use it. I'll see if I can find it.
The following users liked this post:
C6Z06Silverbullet (07-02-2018)
#5
Melting Slicks
Thread Starter
The following users liked this post:
C6Z06Silverbullet (07-02-2018)
#7
Le Mans Master
Do a search on ebay for mild 2 wild...corvettecentral.com has one that is controlled by a switch. You can put it on your dead mans pedal (farthest to left). Out of the way, easy to use, takes 10 minutes to put in. No fob. Take the dead man pedal off, drill a small hole through it (its plastic), install the switch, run the wire through the console and into the fuse block on the passenger side, done. I guess if you wanted, you could put the switch in the ashtray, but the foot control is much easier and out of the way. Simply move your foot and push.
#8
Melting Slicks
Thread Starter
Do a search on ebay for mild 2 wild...corvettecentral.com has one that is controlled by a switch. You can put it on your dead mans pedal (farthest to left). Out of the way, easy to use, takes 10 minutes to put in. No fob. Take the dead man pedal off, drill a small hole through it (its plastic), install the switch, run the wire through the console and into the fuse block on the passenger side, done. I guess if you wanted, you could put the switch in the ashtray, but the foot control is much easier and out of the way. Simply move your foot and push.
#9
Team Owner
I have the "old school" M2W, which is the dead pedal switch. Works great for me.
#11
Melting Slicks
Thread Starter
Yeah I think that's what I'm gonna end up doing. I just installed BBE Gen 3 last night. Oh my God why did I wait so long! It sounds incredible. Haven't taken to the road yet but just the difference at idle us unbelievable. Happy 4th!
#12
Pro
#14
Melting Slicks
Thread Starter
I went with the deadman switch. Installed it today very easy set up done in 15 minutes.
Last edited by C6Z06Silverbullet; 07-20-2018 at 04:39 PM.