Da Z06

Can anyone comment if the new ZR1 wheel fits the C6Z?

Da Z06

Can anyone confirm on the C7 ZR1?

Front: 19x10.5 +42
Rear? 20x12 +59

ZRCLONE

Looked into them, and yes they do fit. The front for some reason is a half inch wider than ours but uses the same size tire as the C7 ZO6 .which is a 10" wide rim.

Da Z06

Humm. Is .5" too much on the C6Z front? Will that be sticking out?

MTPZ06

I think it might flush up pretty good...many guys have put 1/2 spacers up front on C6Z's. Obviously it becomes a preference thing, but here's one example... https://www.corvetteforum.com/forums...tep-on-in.html

Da Z06

You are correct, it looks real good. Will have to move the rears as well to match.

ZRCLONE

Don't know why they did not make the rears wider, had a set of HRE's on my other car that where 10.5" and 12.5" and sat nice and flush.

FNBADAZ06

While I realize the comparison I'm about to give you is for an 18" wheel, most C6 Z06 CCW fitments for the C14, C10, etc. are 18x11 front, 18x13 rear
I'm willing to bet a 19x10.5 front would fit easily........I run 19x10 with a 1/8th steel spacer from my old 91 Z28 Camaro, just to widen the track a smidge

TXGS507

Pics Vic of said 3rd gen 91 Z28... Love em!!! I have owned 3 IROC's 85,87,89... This one is the one that got away... WCT5 low optioned car....

FNBADAZ06

Oh boy !!!!
I had a pair of 86 IROC 5.0's , 88 IROC 5.7, 91 Z28 5.7, 91 Z28 5.0 vert
TPI's, baby !!!!

Slick 6MT

Has anyone done this? If so, post some photos!

MTPZ06

Do the C7 ZR1 wheels crack and snap like the C7Z wheels do? If they have the same problem, I don’t care how good they look.

HouseS2k

if they do just get repos haha they don’t have that problem!

SLOWEST Z

Saw them on instagram

03Zcrit

Damn that car looks good!

ttx350z

My fronts are 18x10.5 +56 (with 12mm spacer so it +44 as it sits on the car).

I know they're not 19's but there's no rub with that width and offset

Vernon

Agreed! They look nice