Which Cam is that Z06
#1
Instructor
Thread Starter
Which Cam is that Z06
Hi Guys Greetings Germany I need ls7 Freaks can anyone tell me which cam I have in my Z06. Maybe you can hear the exhaust sound from Video and tell me which cam is that.
My previous owner don't know which Cam is that. But he say the cam is from GM performance cam.
My Idle is about 900-950rpm the Could start its little Lumpy but i think that's a small Cam but i don't know which One ...
It's A Old Katech Tune on my ECU no dyno tune the tune is over 7 years Old my previous owner say nobody could Tune i Corvette a few years Ago...
I do all the Work myself but im a LS noob learn more about it.
I will make a dyno Tune in few Months when i have money again ...
Also i have:
Stock Milled and reworked Heads (stainless steal valves)
Turnnion kit
Fan belt Katech
double valve springs
Ported MSD
Ported Stock TB
CAI from K&N intake
Exedy Stage 2 (2 disc) clutch kit with flywheel
Headers from LG motorsport
HJS cats with X pipe and Stock Muffler (nothing modded)
Stock bottom end
My previous owner don't know which Cam is that. But he say the cam is from GM performance cam.
My Idle is about 900-950rpm the Could start its little Lumpy but i think that's a small Cam but i don't know which One ...
It's A Old Katech Tune on my ECU no dyno tune the tune is over 7 years Old my previous owner say nobody could Tune i Corvette a few years Ago...
I do all the Work myself but im a LS noob learn more about it.
I will make a dyno Tune in few Months when i have money again ...
Also i have:
Stock Milled and reworked Heads (stainless steal valves)
Turnnion kit
Fan belt Katech
double valve springs
Ported MSD
Ported Stock TB
CAI from K&N intake
Exedy Stage 2 (2 disc) clutch kit with flywheel
Headers from LG motorsport
HJS cats with X pipe and Stock Muffler (nothing modded)
Stock bottom end
Last edited by hy_bmw_freak; 08-18-2018 at 06:29 PM.
#3
Instructor
Thread Starter
Hmm Thanks for the answer was very helpful I know myself that it is almost impossible to guess which cam was installed but maybe you can tell me the direction !!!
Maybe Katech K116 or K110 another small Cam...
In Germany hardly find a C6 Z06 owner maybe it is 500-pieces
Maybe Katech K116 or K110 another small Cam...
In Germany hardly find a C6 Z06 owner maybe it is 500-pieces
Last edited by hy_bmw_freak; 08-18-2018 at 06:54 PM.
#6
Instructor
Thread Starter
@Starfish_Prime Thanks man !
@JesC6Z Thanks a lot you mean what is on it on the Headlamps.´? I have a foil on it (headlight Film) is of course not allowed in Germany like everything else must always look in the rear view mirror
In Germany, everything except traffic if it to loud and lowered. Stay tuned
@JesC6Z Thanks a lot you mean what is on it on the Headlamps.´? I have a foil on it (headlight Film) is of course not allowed in Germany like everything else must always look in the rear view mirror
In Germany, everything except traffic if it to loud and lowered. Stay tuned
#7
Melting Slicks
#9
#10
Instructor
Thread Starter
Lol which Intake Valve is that just saw it (Intake Valves in Chrom edition hahah omg )
No up to date just little difference between today
No up to date just little difference between today
Last edited by hy_bmw_freak; 08-19-2018 at 08:32 PM.
#11
Team Owner
Those are not OE Titanium intake valves...they don't even look like Titanium for that matter.
#12
Instructor
Thread Starter
Yes I know they are not stock Titan valves I have the old valves in my garage... but I don't know which valves they are manley Ferrea or comp cams...
Intake and exhaust valves are stainless steel but I don't know which one..
Intake and exhaust valves are stainless steel but I don't know which one..
Last edited by hy_bmw_freak; 08-20-2018 at 03:41 PM.
#14
Premium Supporting Vendor
Hi Guys Greetings Germany I need ls7 Freaks can anyone tell me which cam I have in my Z06. Maybe you can hear the exhaust sound from Video and tell me which cam is that.
My previous owner don't know which Cam is that. But he say the cam is from GM performance cam.
My Idle is about 900-950rpm the Could start its little Lumpy but i think that's a small Cam but i don't know which One ...
It's A Old Katech Tune on my ECU no dyno tune the tune is over 7 years Old my previous owner say nobody could Tune i Corvette a few years Ago...
https://youtu.be/fr1lKkJfXeA
https://youtu.be/kTUpBxL4Gik
I do all the Work myself but im a LS noob learn more about it.
I will make a dyno Tune in few Months when i have money again ...
Also i have:
Stock Milled and reworked Heads (stainless steal valves)
Turnnion kit
Fan belt Katech
double valve springs
Ported MSD
Ported Stock TB
CAI from K&N intake
Exedy Stage 2 (2 disc) clutch kit with flywheel
Headers from LG motorsport
HJS cats with X pipe and Stock Muffler (nothing modded)
Stock bottom end
My previous owner don't know which Cam is that. But he say the cam is from GM performance cam.
My Idle is about 900-950rpm the Could start its little Lumpy but i think that's a small Cam but i don't know which One ...
It's A Old Katech Tune on my ECU no dyno tune the tune is over 7 years Old my previous owner say nobody could Tune i Corvette a few years Ago...
https://youtu.be/fr1lKkJfXeA
https://youtu.be/kTUpBxL4Gik
I do all the Work myself but im a LS noob learn more about it.
I will make a dyno Tune in few Months when i have money again ...
Also i have:
Stock Milled and reworked Heads (stainless steal valves)
Turnnion kit
Fan belt Katech
double valve springs
Ported MSD
Ported Stock TB
CAI from K&N intake
Exedy Stage 2 (2 disc) clutch kit with flywheel
Headers from LG motorsport
HJS cats with X pipe and Stock Muffler (nothing modded)
Stock bottom end
#15
Instructor
Thread Starter
Yessss yes i think thats LG Cams i Look all Z06 videos on Youtube thanks a Lot can you tell me specs about the Cam ??
I think about 6-9years ago he take the Cam i can give you name about the Previours owner if its help....
about 1500rpm The car is running not perfectly round , I guess a lot of cams are like that
I Must say the Cam also The Car runs with my small build Setup very good my firend has same Mods with k501 cam from Katech he is 1 sec slower than me from 100-200 kmh with vbox
i have about 5,5-5,7 sec with 2 shifts its not bad i think
60-130 6.5 sec without msd porting and tb porting and Tune on dyno !!! i make new vbox measure
my goal would be 6,3
no comparison to the american corvettes these are other worlds which are much faster ... if i see 630 whp and more thats Crazy...
I think about 6-9years ago he take the Cam i can give you name about the Previours owner if its help....
about 1500rpm The car is running not perfectly round , I guess a lot of cams are like that
I Must say the Cam also The Car runs with my small build Setup very good my firend has same Mods with k501 cam from Katech he is 1 sec slower than me from 100-200 kmh with vbox
i have about 5,5-5,7 sec with 2 shifts its not bad i think
60-130 6.5 sec without msd porting and tb porting and Tune on dyno !!! i make new vbox measure
my goal would be 6,3
no comparison to the american corvettes these are other worlds which are much faster ... if i see 630 whp and more thats Crazy...
Last edited by hy_bmw_freak; 08-20-2018 at 08:29 PM.
#17
Premium Supporting Vendor
Yessss yes i think thats LG Cams i Look all Z06 videos on Youtube thanks a Lot can you tell me specs about the Cam ??
I think about 6-9years ago he take the Cam i can give you name about the Previours owner if its help....
about 1500rpm The car is running not perfectly round , I guess a lot of cams are like that
I Must say the Cam also The Car runs with my small build Setup very good my firend has same Mods with k501 cam from Katech he is 1 sec slower than me from 100-200 kmh with vbox
i have about 5,5-5,7 sec with 2 shifts its not bad i think
60-130 6.5 sec without msd porting and tb porting and Tune on dyno !!! i make new vbox measure
my goal would be 6,3
no comparison to the american corvettes these are other worlds which are much faster ... if i see 630 whp and more thats Crazy...
I think about 6-9years ago he take the Cam i can give you name about the Previours owner if its help....
about 1500rpm The car is running not perfectly round , I guess a lot of cams are like that
I Must say the Cam also The Car runs with my small build Setup very good my firend has same Mods with k501 cam from Katech he is 1 sec slower than me from 100-200 kmh with vbox
i have about 5,5-5,7 sec with 2 shifts its not bad i think
60-130 6.5 sec without msd porting and tb porting and Tune on dyno !!! i make new vbox measure
my goal would be 6,3
no comparison to the american corvettes these are other worlds which are much faster ... if i see 630 whp and more thats Crazy...
Thanks!
Dane
#18
Instructor
Thread Starter
Here is my Rund without Porting MSD and without Porting TB and without Dyno Tune
Run with Pump Gas stock Weight 19 inch in front 20 inch in Rear
With Katech Aero Kit 6,5 60-130 mph wiht Stock Ratio and 3 shifts 2,3,4 gear
My goal is about 6,3-6,1 sec 60-130 mph thats ok for my when i have More Time i testet it again with porting msd and TB...
And Later with Tune on dyno...
Its not so fast Car but for natural aspired in Germany its ok i think
Run with Pump Gas stock Weight 19 inch in front 20 inch in Rear
With Katech Aero Kit 6,5 60-130 mph wiht Stock Ratio and 3 shifts 2,3,4 gear
My goal is about 6,3-6,1 sec 60-130 mph thats ok for my when i have More Time i testet it again with porting msd and TB...
And Later with Tune on dyno...
Its not so fast Car but for natural aspired in Germany its ok i think
#20
Burning Brakes
Member Since: Mar 2011
Location: Tampa FL
Posts: 1,078
Received 188 Likes
on
138 Posts
St. Jude Donor '13
Here is my high octane table. We need to see a log of your KR. That looks like a lot of high load timing.You can see around 4000 rpm I spray methanol and water allowing a little more timing for my car.
Last edited by MickVette; 11-11-2018 at 10:44 PM.