When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
ExtremeOnlineStore | C6 Z06 Front Splitter - Carbon Fiber/Carbon Flash/Primer Black
C6 Corvette ZR1 & Z06General info about GM’s Corvette Supercar, LS9 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
I don't see the bolt holes? Does it just bolt up in where the factory splitter was?
Can I still use my quick release license plate holder, which is fixtured into the air vent on the driver side between the body and splitter?
Excellent marketing response! You guys must have noticed all the hubbub about the wear of this part lately.
Yes, you will able to bolt on the splitter directly. You may not able to use the quick release license plate holder after you install the splitter. Btw, all the item will be inspired and re-polished before fulfillment.
So I received the Front Splitter in the mail yesterday from EOS. Still waiting on the Side Skirts (got the side skirts in carbon fiber). I just got done installing the Splitter. Looks pretty good for being ABS hydrodipped carbon fiber. I went with this style splitter because I rub getting in and out of my driveway, hopefully I can still get in and out.....��. There are 13 bolts on the stock splitter, 9 of those holes line up with the new one. You have to add 4 holes. These are on either side of the openings on the new splitter. I also used 3M double sided tape. If you put all the stocks screws in just a couple of threads you end up with about a 1/4 inch opening. If you take a small pick you can peel the top off the 3M tape before you tighten the bolts. This way the tape doesn't stick before its lined up. For the 4 added holes I used the screws they supplied. If these dont hold up I will just drill out the holes and use GM plastic push clips. I don't like drilling holes but at least if I put the old splitter back.on you would never see them. Fits pretty dam good too. Here are some pics.
3M tape I used
The screw on the left is what they supply. The clip on the right is i will use if the screws don't hold up
New vs old
New vs old
After i put the 3M tape on
Originally Posted by C6Z06Silverbullet
Well I made it out of the driveway and back in without hitting Here's some pics on the ground.
Last edited by ExtremeOnlineStore; 07-15-2019 at 01:10 PM.
I have the Extremem Online Store stuff too, I baby it and it's still taken some damage, I think the worst of it was someone that stepped on it. So no reason to spend big bucks when these fit perfectly and look outstanding. My next one I will ne covering with clear bra though.
Last edited by ExtremeOnlineStore; 12-14-2018 at 03:05 PM.
I cannot say enough about this supplier. I originally ordered the complete set, splitter ZR1 spoiler and the side skirts. While the splitter never fit correctly, I never said anything and ordered a carbon fiber one for around $400. Took over 7 weeks to get it. I had the skirts on as well as the spoiler for some time and then pulled a bone head mistake and forgot I was parked next to a island and pulled out and kit the cure breaking the right side skirt. I went on line the next day and saw that EOS had side skirts for the base in the carbon fiber look. Order a new set and had then in less then 7 days. A perfect fit and now they match the front splitter. It would be nice if they came out with the ZR1 spoiler in the same finish. Foe now I am going to try and wrap it with the 3m carbon fiber look vinyl.
Not the best picture, because the car is in the garage covered but when I can I will get a few more pictures from different angles.
Final thought, if anyone is concerned about the products, because they are cheaper, if you drive the car daily, these are the way to go. They fit great, and if you do break then you can replace then and still be under what others charge for a set.
Last edited by ExtremeOnlineStore; 01-15-2019 at 02:35 PM.
I ended up going with the raw ABS splitter and side skirts on ebay, they match the OEM plastic rear diffuser and other plastics perfectly. It was about $300 for the whole kit, at that price I'm not concerned about having to replace them down the road. I've had them on my car for two year now and look great. leaving them raw ABS I don't have to worry about rocks chipping the paint or when my passengers accidently scrape there feet on side skirts, which my wife does all the time, after 2 years there is no evidence of her shoe scraping. the fit was pretty decent, I didn't have to do any special modifications to fit, no gaps. The finish is somewhat textured like the rear diffuser.
Last edited by ExtremeOnlineStore; 07-14-2019 at 05:20 PM.
This is an excellent front chin splitter, but my Extreme Online Store ZR1 style front splitter had no pre-drilled holes in it ... Had to drill my own
What's the deal with that ?
Can you please send us an email or PM for more assist? We may either offer you a discount or send you a replacement for the defective item. We are sorry about the inconvenience. Thank you.
Too late now ... My front splitter is installed on the car already as you can see from my photos below.
In fact, it is my car that you continue to use on your website as an advertisement !
Look familiar ?
We may offer you an extra discount for your next purchase. Please let us know if you are interested in any item that we carry. We hope that you satisfied with our products and services. Thank you.
Selling a set of the Wide ZR1 carbon fiber side skirts and rear flaps. Will fit all standard wide body Z06s and ZR1s
$800 local pick up preferred will ship on buyers dime
also have a ZR1 splitter too that has some scuffs I’ll throw in for another $100
Last edited by ExtremeOnlineStore; 09-05-2019 at 05:04 PM.
09-11-2018, 08:02 PM
ExtremeOnlineStore | C6 Z06 Front Splitter - Carbon Fiber/Carbon Flash/Primer Black
Here's some pics on the ground.
