[Z06] All New Forgestar D5 Drag Wheels- Flow Formed - Bead Knurling & Bead Lock- Corvette
#41
Supporting Vendor
Thread Starter
Here are the wheel weights we calculated on a Fedex Scale .
__________________
ALL TOP NAME BRANDS ONLY A PM, EMAIL OR PHONE CALL AWAY !
Office 800.814.8423
forum@vibemotorsports.com | Corvette Wheel Specialist
ALL TOP NAME BRANDS ONLY A PM, EMAIL OR PHONE CALL AWAY !
Office 800.814.8423
forum@vibemotorsports.com | Corvette Wheel Specialist
The following users liked this post:
VibeMotorsports (02-06-2019)
#43
Burning Brakes
I just saw this thread. I did a quick interview at PRI about these.
(Sorry for the camera shake...my gimble broke the day before and I had to use a cheap selfie stick. Got a bit of nerve damage in my hands and it showed )
(Sorry for the camera shake...my gimble broke the day before and I had to use a cheap selfie stick. Got a bit of nerve damage in my hands and it showed )
The following users liked this post:
VibeMotorsports (02-07-2019)
#44
Supporting Vendor
Thread Starter
I just saw this thread. I did a quick interview at PRI about these.
(Sorry for the camera shake...my gimble broke the day before and I had to use a cheap selfie stick. Got a bit of nerve damage in my hands and it showed )
https://youtu.be/dRigGVete70
(Sorry for the camera shake...my gimble broke the day before and I had to use a cheap selfie stick. Got a bit of nerve damage in my hands and it showed )
https://youtu.be/dRigGVete70
#48
Drifting
The following users liked this post:
VibeMotorsports (02-12-2019)
#52
Heel & Toe
Scaled
Got my C6Z D5’s today. Decided to weigh them to see if I get anything close to what is posted.
I had had my son weigh himself then pick up each wheel and weigh himself. Our scale goes down to 2oz increments and matches with a few Dr’s office scales. Anyway. Results below.
17x5 was 17.2lbs
17x11 Beadlock w/ hardware was 27.6lbs
I had had my son weigh himself then pick up each wheel and weigh himself. Our scale goes down to 2oz increments and matches with a few Dr’s office scales. Anyway. Results below.
17x5 was 17.2lbs
17x11 Beadlock w/ hardware was 27.6lbs
The following users liked this post:
OwensRacing (04-24-2019)
#54
Heel & Toe
The following users liked this post:
VibeMotorsports (04-25-2019)
#56
Pro
I see there are 15” forgestar beadlocks now available, in the D5. Has anyone used these yet?
They are available in the 15x10 as well as 15x11, and have the +35, +45, and +50 offsets also available.
What sizes and offsets fit the c7z with LG 15” rear conversion?
https://pkautodesign.com/shop/forgestar-d5-beadlock/
They are available in the 15x10 as well as 15x11, and have the +35, +45, and +50 offsets also available.
What sizes and offsets fit the c7z with LG 15” rear conversion?
https://pkautodesign.com/shop/forgestar-d5-beadlock/
Last edited by ACS55; 04-24-2019 at 07:34 AM.
#58
Pro
I love the look of the rear bead lock wheels especially, and i like the front wheels pretty well too. thank you for sharing the photo's!!
The following users liked this post:
VibeMotorsports (04-25-2019)
#60
Supporting Vendor
Thread Starter
But what i did the other day was a D5 18x5 of a Camaro fitment with a 18x12 Vette.