AHP CNC Ported Pkg 4 LS7 Heads (Pics and Data)
#21
Melting Slicks
I thought factory intake was like 270 cc to begin with I guess it is a little smaller then. Exhaust is like 90 cc so I can see the extra 9 cc increase there.
#22
Burning Brakes
https://www.corvetteforum.com/forums...install-5.html
#23
Supporting Vendor
Thread Starter
Member Since: Sep 2013
Location: Harbor City California
Posts: 2,815
Received 1,012 Likes
on
533 Posts
Do the guides have to come out prior to machining the ports? I ask a seemingly silly question because I've got a set of your (AHP) freshly rebuilt heads with MS90 guides and perfectly cut seats that I've been sitting on. This set has the mild street port done to them. I don't mind spending money, but I hate spending it on something twice......
Sent you a PM sir.
Last edited by American Heritage; 01-23-2019 at 02:51 AM.
#24
Supporting Vendor
Thread Starter
Member Since: Sep 2013
Location: Harbor City California
Posts: 2,815
Received 1,012 Likes
on
533 Posts
You can have run a 100% stock setup (cam, etc..) with our CNC ported heads and still pickup very good power gains without any loss of driveablity or down side at all.
In short our new CNC ported LS7 heads are a perfect "drop in/bolt on" cylinder head!!!!
Last edited by American Heritage; 01-31-2019 at 05:47 PM.
#25
Do the guides have to come out prior to machining the ports? I ask a seemingly silly question because I've got a set of your (AHP) freshly rebuilt heads with MS90 guides and perfectly cut seats that I've been sitting on. This set has the mild street port done to them. I don't mind spending money, but I hate spending it on something twice......
Hello Michael Hope you have been well!
Sent you a PM sir.
Sent you a PM sir.
Guess I had a similar question. I have a set of AHP heads w/ the old street port still in the box. We are finishing up the bottom end rebuild and close to slapping the heads back on -- I wonder how much I am leaving on the table with the old street port compared to the new CNC porting. (BTR3, Mamo Fast, 102NW, 1-7/8 LG w/ forged bottom end build)
Last edited by Ryan95i4; 02-01-2019 at 10:28 AM.
#26
Supporting Vendor
Thread Starter
Member Since: Sep 2013
Location: Harbor City California
Posts: 2,815
Received 1,012 Likes
on
533 Posts
Yes sir if you order our Basic Package 4 Heads you still get our Performance Valve job which is perfectly concentric and also picks up a few additional HP over the stock Valve Job due to our improved seat angles.
All our Intake valves are Treated and Polished. The Treating process hardens the valve while the polishing smooths out the stems to ensure not only the proper RA finish but also microscopically Plateaus the high spots creating a nice smooth surface for electrons to build up on.
https://www.americanheritageperformance.com/
Last edited by American Heritage; 02-13-2019 at 02:35 AM.
The following users liked this post:
Formula8 (02-13-2019)
#27
Race Director
PM sent just a few minutes ago before I found rhis thread. But that PM was based on correspondence dating back to 2017.
Pending your response.
Pending your response.
#28
Supporting Vendor
Thread Starter
Member Since: Sep 2013
Location: Harbor City California
Posts: 2,815
Received 1,012 Likes
on
533 Posts
On the Chassis Dyno we are seeing some very good HP & TQ gains with our New AHP CNC Program over any previous porting program. You get better and better as time goes on so to speak.
https://www.americanheritageperformance.com/
The following users liked this post:
TRSCobra (03-28-2019)
#29
Just saw the AHP valve covers on IG!! They look sick! What’s up with an update on here man? When will they be available? Price? Style? F/I or N/A option? The boys need answers lol
Last edited by 73DBG; 03-28-2019 at 07:28 PM.
#30
Last edited by johnodrake; 03-28-2019 at 11:49 PM. Reason: NSV :ink
#31
Aware of that.
#32
Supporting Vendor
Thread Starter
Member Since: Sep 2013
Location: Harbor City California
Posts: 2,815
Received 1,012 Likes
on
533 Posts
The covers are coming along nicely, thanks for the inspiration!
Have not finished with them yet but getting closer.
We plan on some ceramic paint in the engraved areas to make it stand out. Possibly offering the colors of the cars so owners could match their AHP covers to their car paint color.
We will plan to sell them as a full kit (wires, gaskets, coil pack brackets) to make it easier as possible.
Some pics of where we are currently at with our new covers:
https://www.americanheritageperformance.com/
Last edited by American Heritage; 04-02-2019 at 03:47 AM.
#34
if you follow AHP on IG you’ll know a little more(for anyone who isn’t following them), they have a little more about them on there. I know a few more details about it but I’m not sure what Khole wants to put out yet so I’m gonna let him drop that intel when he’s ready. I’ll say this....**** looks 🔥 and should be making some serious bald eagles!
Last edited by 73DBG; 04-02-2019 at 08:21 AM.
#35
Burning Brakes
I have an Archangel build underway
Not sure what Kohle wants released at this point but I am sure we will all know soon
Not sure what Kohle wants released at this point but I am sure we will all know soon
Last edited by Mirek; 04-02-2019 at 10:32 AM.
#36
#37
Burning Brakes
If I did I would !
AHP will be sending me pictures as the build progresses and I believe the engine is scheduled to be assembled this week so I will post up anything they are Ok with.
Should be a monster N/A build and the plan called for it to be completely streetable (well balanced).......we will see how the concept matches the execution !
I will say is that AHP has been great to work with as they have rebuilt the entire car at this point and addressed every concern and question I have had.
BTW, the lift on the cam is .720 (!)
AHP will be sending me pictures as the build progresses and I believe the engine is scheduled to be assembled this week so I will post up anything they are Ok with.
Should be a monster N/A build and the plan called for it to be completely streetable (well balanced).......we will see how the concept matches the execution !
I will say is that AHP has been great to work with as they have rebuilt the entire car at this point and addressed every concern and question I have had.
BTW, the lift on the cam is .720 (!)
#38
If I did I would !
AHP will be sending me pictures as the build progresses and I believe the engine is scheduled to be assembled this week so I will post up anything they are Ok with.
Should be a monster N/A build and the plan called for it to be completely streetable (well balanced).......we will see how the concept matches the execution !
I will say is that AHP has been great to work with as they have rebuilt the entire car at this point and addressed every concern and question I have had.
BTW, the lift on the cam is .720 (!)
AHP will be sending me pictures as the build progresses and I believe the engine is scheduled to be assembled this week so I will post up anything they are Ok with.
Should be a monster N/A build and the plan called for it to be completely streetable (well balanced).......we will see how the concept matches the execution !
I will say is that AHP has been great to work with as they have rebuilt the entire car at this point and addressed every concern and question I have had.
BTW, the lift on the cam is .720 (!)
#39
Khole! Broski!!!
What’s up with the color match engraved etching on the valve covers? Got any new pictures? Is a 🇺🇸 Scheme going to offered? Maybe even a hard release date when they go on sale?
Oh oh and I got this pretty cool license plate frame!! Very pleased with it came out
What’s up with the color match engraved etching on the valve covers? Got any new pictures? Is a 🇺🇸 Scheme going to offered? Maybe even a hard release date when they go on sale?
Oh oh and I got this pretty cool license plate frame!! Very pleased with it came out
#40
Supporting Vendor
Thread Starter
Member Since: Sep 2013
Location: Harbor City California
Posts: 2,815
Received 1,012 Likes
on
533 Posts
Khole! Broski!!!
What’s up with the color match engraved etching on the valve covers? Got any new pictures? Is a ���� Scheme going to offered? Maybe even a hard release date when they go on sale?
Oh oh and I got this pretty cool license plate frame!! Very pleased with it came out
What’s up with the color match engraved etching on the valve covers? Got any new pictures? Is a ���� Scheme going to offered? Maybe even a hard release date when they go on sale?
Oh oh and I got this pretty cool license plate frame!! Very pleased with it came out
Yes Sir!!!
We should have pricing shortly.
Very cool license plate frame! Now you see me, now you dont...
https://www.americanheritageperformance.com/
Last edited by American Heritage; 05-01-2019 at 03:28 AM.