[Z06] Rohana RFX11 WTB
#1
Racer
Thread Starter
Rohana RFX11 WTB
I want to post this so we as consumers can convince Rohana to offer this wheel in C6Z sizes. This is an awesome looking wheel that they produce in a 19/20 setup in the correct widths but the offsets are too large. Hopefully there are others that would also be interested. Let me know what you think.
#3
Hey guys, would these wheels fit with proper offset on a 2015 base stingray vert,
https://www.ebay.com/itm/19-ROHANA-R...-/292808922218
Offsets always confuse me with making the wheels and tires fit right.
Thanks
Jon
https://www.ebay.com/itm/19-ROHANA-R...-/292808922218
Offsets always confuse me with making the wheels and tires fit right.
Thanks
Jon
#4
Racer
Thread Starter
Hey guys, would these wheels fit with proper offset on a 2015 base stingray vert,
https://www.ebay.com/itm/19-ROHANA-R...-/292808922218
Offsets always confuse me with making the wheels and tires fit right.
Thanks
Jon
https://www.ebay.com/itm/19-ROHANA-R...-/292808922218
Offsets always confuse me with making the wheels and tires fit right.
Thanks
Jon
Last edited by etazbaz; 01-31-2019 at 11:44 AM.
#5
I want to post this so we as consumers can convince Rohana to offer this wheel in C6Z sizes. This is an awesome looking wheel that they produce in a 19/20 setup in the correct widths but the offsets are too large. Hopefully there are others that would also be interested. Let me know what you think.
#6
Racer
Thread Starter
Stance makes a wheel that is extremely similar in C6 Z offsets with a 19/20 set up. Check these out https://www.corvetteforum.com/forums...-c7-z06-3.html
#7
so does signature wheels SV107 I believe there called they will be much less expensive as I have quote out a set of Rohana wheels and they were over 5k
Last edited by bptuner; 02-02-2019 at 06:47 PM.
#8
Racer
Thread Starter
#10
Racer
Thread Starter
FYI - I have given up on waiting for Rohana to come around. Decided to go with BC Forged RS41s. Almost double the cost but beautiful and the right size.
#11
#12
#15
Racer
Thread Starter
i really struggled between silver and brushed black. i think i should have gone with silver. they would have popped more and the brushed black looks bronze in a lot of different lighting conditions up in the pacific northwest.
#16
Thank you, I will mark brushed black off my list!
#18
Racer
Thread Starter
The following users liked this post:
InfiniteReality (06-27-2019)
#20
Racer
Thread Starter
not sure yet. considering the 1" drop and the +1 wheel sizes the car is not overly harsh. harsher than stock for sure but acceptable. current settings are 8/30 all around for damping. i'm going to dial the fronts up to 15 and try that. car feels a little too floaty for my taste. i don't want to increase the rear because it will be too harsh. tried 15 all around and didn't like it. hoping this will reduce floatiness w/o adding much additional harshness. ideal setup would be really good damping w/o harshness but not sure if that is possible with my suspension geometry and wheel size.