[ZR1] LG Motorsports New ZR1 Build
#41
Premium Supporting Vendor
Thread Starter
I talked with Jorge at JMS about this product, a customer was bringing one in for tuning after adding that divider to try and break a hp mark. Conceptually I like it, are you running one?
#47
Premium Supporting Vendor
Thread Starter
Belt from Lingenfelter took 7-10 days longer than I was originally told, last Thursday the belt came in and it was a 16 rib, apparently bando sent LPE the wrong belts and the new ones were supposed to arrive at LPE yesterday so I’ll follow up tomorrow to verify. Kinda sucks when an entire build is in a standstill for a belt! I asked our lead tech if we should order a gates 12 and cut a rib off and he gave me a go back to your desk look haha.
#48
Melting Slicks
Also my .2...the only thing I'd change is the LPE to the Synergy 4.5"....or even better the Kong 5".
#49
Premium Supporting Vendor
Thread Starter
It’s been mentioned a few times, the gentleman has had it since new, hasn’t modified it prior to this, doesn’t take it to the track, just street drives it. If it was for someone racing the car we’d be porting the blower, porting the heads and running a custom 5” velocity stack intake. I agree with the .02 I just like the cleanliness of an all LPE intake system on this particular build.
#50
Belt from Lingenfelter took 7-10 days longer than I was originally told, last Thursday the belt came in and it was a 16 rib, apparently bando sent LPE the wrong belts and the new ones were supposed to arrive at LPE yesterday so I’ll follow up tomorrow to verify. Kinda sucks when an entire build is in a standstill for a belt! I asked our lead tech if we should order a gates 12 and cut a rib off and he gave me a go back to your desk look haha.
#51
Team Owner
Member Since: Mar 2007
Location: Right Corner Pocket of Illinois
Posts: 32,265
Received 1,491 Likes
on
1,005 Posts
No-IL Events Coordinator
2020 C6 of the Year Finalist - Unmodified
2020 Corvette of the Year Finalist (appearance mods)
C6 of Year Winner (appearance mods) 2019
2018 C6 of Year Finalist
St. Jude Donor '12-'13-'14-'15-'16-'17-'18-'19-'20-'21-'22-'23-'24
Can you share information on the tires/sizes that will be used to put this power to the pavement?
#52
Premium Supporting Vendor
Thread Starter
#53
Premium Supporting Vendor
Thread Starter
Belt & Radiator came in today. Should be finished up today and on the dyno tomorrow!
#55
Premium Supporting Vendor
Thread Starter
#57
#58
Premium Supporting Vendor
Thread Starter
#59
Premium Supporting Vendor
Thread Starter
Just about finished with E85 tuning, final number today
#60
769