Notices
C6 Corvette ZR1 & Z06 General info about GM’s Corvette Supercar, LS9 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
Sponsored by:
Sponsored by: Kraken

[ZR1] My 2013 ZR1 on the Dyno

Thread Tools
 
Search this Thread
 
Old 01-29-2019, 02:54 PM
  #1  
ZF Six
Melting Slicks
Support Corvetteforum!
Thread Starter
 
ZF Six's Avatar
 
Member Since: Jul 2003
Location: Spring Texas
Posts: 3,412
Received 136 Likes on 85 Posts

Default My 2013 ZR1 on the Dyno

2013 ZR1, 20k miles. The car has an Attack Blue drop-in filter, Corsa X-pipe to eliminate the secondary cats, and now a tune.

Baseline was low. I guess it could be the dyno but I'm not worried about it. I didn't care about a number just wanted the car to run well. This was right before the final pull and the tuner dialed it back just a little. Final numbers were 556/521.

Enjoy.

The following 3 users liked this post by ZF Six:
Landru (02-01-2019), MOTOWN Z (02-10-2019), TKO Performance (01-30-2019)
Old 01-29-2019, 04:00 PM
  #2  
BigVette427
Drifting
 
BigVette427's Avatar
 
Member Since: Aug 2013
Location: Hill Country Texas
Posts: 1,353
Received 405 Likes on 253 Posts

Default

Looks like (per the video) 521/504 was your first pull (base pull before tune?), and then 567/528 was you're after pull? Looks like it was on a Dynojet. Those are good numbers. Like the yellow calipers.
Old 01-29-2019, 04:41 PM
  #3  
freddyvette
Burning Brakes
 
freddyvette's Avatar
 
Member Since: Jun 2016
Posts: 857
Received 55 Likes on 49 Posts
Default

Originally Posted by ZF Six
2013 ZR1, 20k miles. The car has an Attack Blue drop-in filter, Corsa X-pipe to eliminate the secondary cats, and now a tune.

Baseline was low. I guess it could be the dyno but I'm not worried about it. I didn't care about a number just wanted the car to run well. This was right before the final pull and the tuner dialed it back just a little. Final numbers were 556/521.

Enjoy.

https://www.youtube.com/watch?v=krq3baEtOYI
Then again Chuck Anders is a complete piece of **** and can't tune worth dick.
Old 01-29-2019, 04:44 PM
  #4  
Ryan95i4
Instructor
 
Ryan95i4's Avatar
 
Member Since: Apr 2009
Posts: 113
Received 18 Likes on 15 Posts

Default

Originally Posted by freddyvette
Then again Chuck Anders is a complete piece of **** and can't tune worth dick.
Well that didnt take long
Old 01-29-2019, 04:44 PM
  #5  
freddyvette
Burning Brakes
 
freddyvette's Avatar
 
Member Since: Jun 2016
Posts: 857
Received 55 Likes on 49 Posts
Default

Originally Posted by Ryan95i4
Well that didnt take long
Haha, you know him? If you did or heard the stories you would agree.
Old 01-29-2019, 04:45 PM
  #6  
Ryan95i4
Instructor
 
Ryan95i4's Avatar
 
Member Since: Apr 2009
Posts: 113
Received 18 Likes on 15 Posts

Default

Originally Posted by freddyvette
Haha, you know him? If you did or heard the stories you would agree.
Nope, but now Im interested lol
Old 01-29-2019, 05:11 PM
  #7  
0Tampa Tuning
Former Vendor
 
Tampa Tuning's Avatar
 
Member Since: Aug 2011
Location: Tampa Fl
Posts: 1,307
Received 110 Likes on 92 Posts
St. Jude Donor '12

Default Corvette Camaro tuner in Tampa E85 cammed

Nice gains. check out my YouTube channel for my dyno runs. https://www.youtube.com/user/tampatuning/videos


My stock 2010 ZR1 put down 520 RWHP on a mustang.

Enjoy the the power.

Last edited by Tampa Tuning; 01-29-2019 at 05:13 PM.
The following users liked this post:
ZF Six (01-29-2019)
Old 01-29-2019, 06:14 PM
  #8  
ZF Six
Melting Slicks
Support Corvetteforum!
Thread Starter
 
ZF Six's Avatar
 
Member Since: Jul 2003
Location: Spring Texas
Posts: 3,412
Received 136 Likes on 85 Posts

Default

Originally Posted by BigVette427
Looks like (per the video) 521/504 was your first pull (base pull before tune?), and then 567/528 was you're after pull? Looks like it was on a Dynojet. Those are good numbers. Like the yellow calipers.
Correct and correct. He dialed it back after it made 567 to make sure it was safe. Thanks!
Originally Posted by freddyvette
Then again Chuck Anders is a complete piece of **** and can't tune worth dick.
Please keep derogatory comments like this to yourself, there's no reason for it. I've known Chuck a long time and he's tuned several of my cars, all have ran great.
Old 01-29-2019, 06:46 PM
  #9  
freddyvette
Burning Brakes
 
freddyvette's Avatar
 
Member Since: Jun 2016
Posts: 857
Received 55 Likes on 49 Posts
Default

Originally Posted by ZF Six
Correct and correct. He dialed it back after it made 567 to make sure it was safe. Thanks!

Please keep derogatory comments like this to yourself, there's no reason for it. I've known Chuck a long time and he's tuned several of my cars, all have ran great.
No, I won't, not after personal friends of mine have been screwed.
Old 01-29-2019, 07:06 PM
  #10  
ZF Six
Melting Slicks
Support Corvetteforum!
Thread Starter
 
ZF Six's Avatar
 
Member Since: Jul 2003
Location: Spring Texas
Posts: 3,412
Received 136 Likes on 85 Posts

Default

Originally Posted by freddyvette
No, I won't, not after personal friends of mine have been screwed.
Old 01-30-2019, 12:46 AM
  #11  
I brake for nothing
Burning Brakes
 
I brake for nothing's Avatar
 
Member Since: Dec 2004
Posts: 1,152
Received 143 Likes on 88 Posts

Default

Thats a gorgeous car.
The following 2 users liked this post by I brake for nothing:
Landru (02-01-2019), ZF Six (01-30-2019)
Old 01-30-2019, 06:59 AM
  #12  
MontanaZR1
Advanced
 
MontanaZR1's Avatar
 
Member Since: Jun 2018
Location: Rochester Hills MI
Posts: 54
Received 9 Likes on 7 Posts
Default

Originally Posted by ZF Six
2013 ZR1, 20k miles. The car has an Attack Blue drop-in filter, Corsa X-pipe to eliminate the secondary cats, and now a tune.

Baseline was low. I guess it could be the dyno but I'm not worried about it. I didn't care about a number just wanted the car to run well. This was right before the final pull and the tuner dialed it back just a little. Final numbers were 556/521.

Enjoy.

https://www.youtube.com/watch?v=krq3baEtOYI
What brand of wheels are those? They look great thinking about a new set for my ZR1.




The following users liked this post:
ZF Six (01-30-2019)
Old 01-30-2019, 07:57 AM
  #13  
ZF Six
Melting Slicks
Support Corvetteforum!
Thread Starter
 
ZF Six's Avatar
 
Member Since: Jul 2003
Location: Spring Texas
Posts: 3,412
Received 136 Likes on 85 Posts

Default

Originally Posted by MontanaZR1
What brand of wheels are those? They look great thinking about a new set for my ZR1.
Signature SV701. They'll be going up for sale in a couple weeks, I have another set of Signature wheels on the way.
Old 01-30-2019, 08:30 AM
  #14  
TXGS507
Race Director
 
TXGS507's Avatar
 
Member Since: Mar 2006
Location: Everywhere and Nowhere at all
Posts: 15,357
Received 1,679 Likes on 1,135 Posts

Default

Solid numbers on a gorgeous ZR1.... Don't feed the trolls... Perhaps they'll go away... Freddy is known to be a half empty kind of guy. Pay him no mind.

Last edited by TXGS507; 01-30-2019 at 08:35 AM.
The following users liked this post:
ZF Six (01-30-2019)
Old 01-30-2019, 11:04 AM
  #15  
leadfart
Pro
 
leadfart's Avatar
 
Member Since: Jul 2016
Location: Treasure Island, Lake McQueeney, Tx
Posts: 613
Received 223 Likes on 144 Posts
Default

Nice numbers, I will be tuning mine, when my GMEPP runs out in November. I'm aiming for 600, that's all I really want!
The following users liked this post:
ZF Six (01-30-2019)
Old 01-30-2019, 01:22 PM
  #16  
ZF Six
Melting Slicks
Support Corvetteforum!
Thread Starter
 
ZF Six's Avatar
 
Member Since: Jul 2003
Location: Spring Texas
Posts: 3,412
Received 136 Likes on 85 Posts

Default

Originally Posted by leadfart
Nice numbers, I will be tuning mine, when my GMEPP runs out in November. I'm aiming for 600, that's all I really want!
My warranty is set to expire in March, so I jumped the gun a little.
The following users liked this post:
leadfart (01-30-2019)
Old 01-30-2019, 08:10 PM
  #17  
Innovate
Drifting
 
Innovate's Avatar
 
Member Since: Dec 2017
Location: Sumter SC
Posts: 1,929
Received 206 Likes on 180 Posts
Default

Nice numbers, now you need Kong goodies next!
The following users liked this post:
ZF Six (02-01-2019)

Get notified of new replies

To My 2013 ZR1 on the Dyno

Old 01-31-2019, 05:01 PM
  #18  
chassed
Melting Slicks
 
chassed's Avatar
 
Member Since: May 2009
Location: Rio Rancho New Mexico
Posts: 3,123
Received 281 Likes on 205 Posts

Default

Excellent!
I love that Diffuser!!!!!!!!
The following users liked this post:
ZF Six (02-01-2019)
Old 02-02-2019, 11:43 AM
  #19  
Bolt-OnZ
Advanced
 
Bolt-OnZ's Avatar
 
Member Since: Oct 2015
Location: Houston
Posts: 66
Likes: 0
Received 4 Likes on 4 Posts
Default

Hey neighbor, I wouldn't worry too much about the numbers. I wanna say mine was 541 on a mustang.
The following users liked this post:
ZF Six (02-10-2019)
Old 02-02-2019, 05:31 PM
  #20  
Aforst
Advanced
 
Aforst's Avatar
 
Member Since: Oct 2016
Posts: 51
Received 4 Likes on 3 Posts
Default

If only those signature were 19/20. What did you order?


Quick Reply: [ZR1] My 2013 ZR1 on the Dyno



All times are GMT -4. The time now is 10:06 PM.