[ZR1] Aftermarket Exhaust Question (Axle back)
#1
Racer
Thread Starter
Aftermarket Exhaust Question (Axle back)
I have some LPE & some Kong mods with estimated 730bhp. Stock exhaust and stock cam. 2010 ZR1 looking for cat back system that will give this car some thump/noise at idle as well as through the rpm band. Valves, no valves, are they needed? I don’t really care about the car being quiet at all. I’ve just read in some of my research that some aftermarket systems are actually quieter than the OEM exhaust. I definitely don’t want that. Any info would be greatly appreciated. Thanks
#2
Racer
Lot of great choices out there; I have Borla Atak and love it. Very deep and aggressive, pretty loud when you want it to be, but tame while cruising. Pops and crackles on decel are awesome. I’ve not missed the valves at all. That said, B&B Fusion and Akropovic both have valves and are quite popular. Corsa also gets a lot of love.
#3
Racer
Thread Starter
Lot of great choices out there; I have Borla Atak and love it. Very deep and aggressive, pretty loud when you want it to be, but tame while cruising. Pops and crackles on decel are awesome. I’ve not missed the valves at all. That said, B&B Fusion and Akropovic both have valves and are quite popular. Corsa also gets a lot of love.
Excellent, that’s just the information I’m looking for. I don’t care to keep the valves at all. I just want some great sound. Thanks, I’m going to go look at the Borla sight now and see what they have. I’d like black tips too, if that’s an option. Thanks again!
#4
Pro
Member Since: Jul 2016
Location: Treasure Island, Lake McQueeney, Tx
Posts: 613
Received 223 Likes
on
144 Posts
I have the Corsa Sports on my stock ZR1, and they are not quiet, at full song! I love the Corsa's, have had them on several cars. The Corsa Extremes are even spicier. I've had Borlas, too. Corsa makes a quality product. HTH
#5
Racer
Thread Starter
#7
Racer
Thread Starter
#9
Racer
Thread Starter
#11
Racer
Thread Starter
#12
Team Owner
#14
Team Owner
#17
Racer
Thread Starter
I figured that, because I didn’t see any of their systems without valves. I just want to eliminate them altogether. I’ve been leaning towards the Billy Boat Bullet system with black 4” tips.
#18
Racer
Thread Starter
Correct, you have to use the actuator appartus from the OEM exhaust. I didn’t really word that correctly. I prefer to just eliminate the valves altogether and if Akra had a system without them, I would have bought it. Those carbon fiber tips are pretty badass.
Last edited by 71HO454; 03-12-2019 at 10:33 AM.
#19
Racer
Thread Starter
#20
Instructor