When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
C6 Corvette ZR1 & Z06General info about GM’s Corvette Supercar, LS9 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track
I've now seen a few other z06s locally and noticed that my spoiler looks different. All the ones I have seen have the black 3rd brake light. But mine looks molded into the spoiler.
No, that's a GM C6 Racing Spoiler, like the one that came on the 2007 Ron Fellows cars. They are hard to find these days in genuine form; I bought an aftermarket version and the fitment was horrible with gaps all over. I then found a genuine GM already painted and it fits and look great. IMO this is the nicest looking spoiler; flows well, still shows off the lines of the rear, and is low-key.
I have the carbon extended ZR1 spoiler. It looks awesome.
How hard was that to install by yourself? I'm always wary of things like that. They always say you don't need to drill holes or do anything funky and you usually always end up having to
I'll post some soon as apart of a larger thread/reveal.
Originally Posted by Josh M
How hard was that to install by yourself? I'm always wary of things like that. They always say you don't need to drill holes or do anything funky and you usually always end up having to
Not too difficult. I did drill holes but there is an indentation underneath the factory spoiler that serves as a pretty good guide. Job took about 2 hours.
The finish is a lightly textured black plastic that matches the GS / Z06 rear diffuser, but, prior to install, I had my spoiler hydrocarbon dipped here locally.
05-28-2019, 01:06 AM
Rear spoiler
