Notices
C6 Corvette ZR1 & Z06 General info about GM’s Corvette Supercar, LS9 Corvette Technical Info, Performance Upgrades, Suspension Setup for Street or Track Advertisement

[Z06] Big boost build (pic heavy)

 
Old 07-07-2019, 03:33 AM
  #1  
SpnkbnkZ06
CF Senior Member
Thread Starter
 
SpnkbnkZ06's Avatar
 
Member Since: Feb 2016
Location: Phoenix Arizona
Posts: 346
Received 11 Likes on 11 Posts
Default Big boost build (pic heavy)

Figured I would start a thread up since my big build is coming up to the finish line finally. Backstory of the car was a 441ci stroker 13.1 CR setup. Made good power but I was wanting something more. I started the teardown and found a buyer for the motor in the car. Gave me a head start on everything else I was going to need in the future. This is my first big boost build and between this forum and alot of local friends (Unreal) I have been able to get it all together.
Basic rundown on the setup:
LSX Block 429CI
4.0 Stroke X 4.130 Bore
Callies Dragonslayer Crank
Callies I-Beam Rods
Wiseco -18cc Pistons
Cam Motion custom grind camshaft

Basically the rundown on the shortblock now to the long block.
Texas Speed 285cc 6 Bolt heads 70CC
Ti Intake valves, Iconnel exhaust valves
PAC 1207X Springs
Smith Bros 3/8 .135 wall pushrods
LS7 Intake manifold/90MM TB.

To get it all to the ground went with a Monster LT1-S Triple disc clutch.

Fuel System went with Fore Innovations Triple pump setup -10 feed -8 return
Be on E-85 most of its life
Bosch 210 Injectors

Supercharger setup
A&A Corvette YSI-B Head unit
A&A Direct Drive
IW 10% O.D. Balancer
10 Rib upgrade to try and eliminate as much belt slip as possible.

Exhaust
ARH 1 7/8 LT
Catless X Pipe
LG GT4 Axle Back

That's the basic rundown of the car. Will attach pictures of it along the way and how it sits now. Thanks for reading!














First wash in over a year. Was filthy

Heading to the shop for the fuel system
SpnkbnkZ06 is offline  
The following users liked this post:
DPW_ (07-08-2019)
Old 07-07-2019, 07:44 AM
  #2  
Patriot Six
CF Senior Member
 
Patriot Six's Avatar
 
Member Since: Jun 2016
Location: Temecula, CA
Posts: 1,185
Received 175 Likes on 169 Posts
Default

In for results.
Patriot Six is offline  
Old 07-07-2019, 10:39 AM
  #3  
GTIMANiac
CF Member
 
GTIMANiac's Avatar
 
Member Since: Nov 2014
Location: Phoenix
Posts: 80
Likes: 0
Received 19 Likes on 16 Posts
Default

What shop is doing fuel system and tuning?
GTIMANiac is offline  
Old 07-07-2019, 10:57 AM
  #4  
Silver Bullet C6
CF Senior Member
 
Silver Bullet C6's Avatar
 
Member Since: Nov 2008
Location: Grand Prairie, stroked and blown 427
Posts: 814
Received 14 Likes on 13 Posts
St. Jude Donor '10-'11-'12
Default

It's gonna be a beast !
Silver Bullet C6 is offline  
Old 07-07-2019, 01:28 PM
  #5  
EnginerdVT
CF Senior Member
 
EnginerdVT's Avatar
 
Member Since: Jul 2013
Location: Maryland
Posts: 1,177
Received 38 Likes on 33 Posts
Default

Excited for you... Watching the build! My F1-X build will be tuned soon hopefully!
EnginerdVT is offline  
The following users liked this post:
jayyyw (07-08-2019)
Old 07-07-2019, 01:32 PM
  #6  
SpnkbnkZ06
CF Senior Member
Thread Starter
 
SpnkbnkZ06's Avatar
 
Member Since: Feb 2016
Location: Phoenix Arizona
Posts: 346
Received 11 Likes on 11 Posts
Default

Originally Posted by Patriot Six View Post
In for results.
You and me both man.
Originally Posted by GTIMANiac View Post
What shop is doing fuel system and tuning?
Modern Performance in Glendale. Chris tuned my last setup. Good dude
Originally Posted by Silver Bullet C6 View Post
It's gonna be a beast !
Thanks man been a long project for sure!
Originally Posted by EnginerdVT View Post
Excited for you... Watching the build! My F1-X build will be tuned soon hopefully!
That's awesome, cars gonna be an animal!
SpnkbnkZ06 is offline  
Old 07-07-2019, 01:51 PM
  #7  
GTIMANiac
CF Member
 
GTIMANiac's Avatar
 
Member Since: Nov 2014
Location: Phoenix
Posts: 80
Likes: 0
Received 19 Likes on 16 Posts
Default

Originally Posted by SpnkbnkZ06 View Post
Modern Performance in Glendale. Chris tuned my last setup. Good dude
Very cool, didn't realize there were competent tuners on our side of town, I'm at 67th / HV but use CPR. You must be like a kid at Christmas waiting for tune!
GTIMANiac is offline  
Old 07-07-2019, 01:52 PM
  #8  
SpnkbnkZ06
CF Senior Member
Thread Starter
 
SpnkbnkZ06's Avatar
 
Member Since: Feb 2016
Location: Phoenix Arizona
Posts: 346
Received 11 Likes on 11 Posts
Default

Originally Posted by GTIMANiac View Post
Very cool, didn't realize there were competent tuners on our side of town, I'm at 67th / HV but use CPR. You must be like a kid at Christmas waiting for tune!
Yea they're off 67th and Northern. The anticipation is killing me!
SpnkbnkZ06 is offline  
Old 07-07-2019, 01:54 PM
  #9  
GTIMANiac
CF Member
 
GTIMANiac's Avatar
 
Member Since: Nov 2014
Location: Phoenix
Posts: 80
Likes: 0
Received 19 Likes on 16 Posts
Default

Originally Posted by SpnkbnkZ06 View Post
Yea they're off 67th and Northern. The anticipation is killing me!
I just dropped mine off Friday probably won't be done until 12th or 15th, trying to get the summer IATs down.
GTIMANiac is offline  
Old 07-07-2019, 07:46 PM
  #10  
captain vette
CF Senior Member
 
Member Since: Dec 2015
Location: Montréal
Posts: 1,348
Received 396 Likes on 287 Posts
Default

this engine look insane! Congrats.
captain vette is online now  
Old 07-07-2019, 07:48 PM
  #11  
SpnkbnkZ06
CF Senior Member
Thread Starter
 
SpnkbnkZ06's Avatar
 
Member Since: Feb 2016
Location: Phoenix Arizona
Posts: 346
Received 11 Likes on 11 Posts
Default

I appreciate it ��
SpnkbnkZ06 is offline  
Old 07-08-2019, 09:24 AM
  #12  
jayyyw
CF Senior Member
 
Member Since: Jun 2015
Location: Austin Tx
Posts: 3,281
Received 308 Likes on 271 Posts
Default

Very nice. What's your end goal? Are you going to overspin the blower?
jayyyw is offline  
Old 07-08-2019, 11:54 AM
  #13  
SpnkbnkZ06
CF Senior Member
Thread Starter
 
SpnkbnkZ06's Avatar
 
Member Since: Feb 2016
Location: Phoenix Arizona
Posts: 346
Received 11 Likes on 11 Posts
Default

Originally Posted by jayyyw View Post
Very nice. What's your end goal? Are you going to overspin the blower?
I'll be satisfied with anything around 1000 in our current weather in AZ. Have a 2.70 head unit pulley and 10% OD at 7k should be around 72k rpm
SpnkbnkZ06 is offline  
The following users liked this post:
jayyyw (07-08-2019)
Old 07-08-2019, 05:52 PM
  #14  
MTPZ06
CF Senior Member
Support Corvetteforum!
 
MTPZ06's Avatar
 
Member Since: Dec 2008
Location: Honolulu HI
Posts: 13,566
Received 1,231 Likes on 1,082 Posts
Default

MTPZ06 is offline  
The following users liked this post:
SpnkbnkZ06 (07-08-2019)
Old 07-09-2019, 05:23 PM
  #15  
FNBADAZ06
CF Senior Member
 
FNBADAZ06's Avatar
 
Member Since: Jun 2009
Posts: 6,042
Received 269 Likes on 224 Posts
Default

Originally Posted by GTIMANiac View Post
Very cool, didn't realize there were competent tuners on our side of town, I'm at 67th / HV but use CPR. You must be like a kid at Christmas waiting for tune!
So you must be the Yellow ZR! I've been seeing lately LOL
I'm also at 67th/HV
FNBADAZ06 is offline  
Old 07-09-2019, 05:24 PM
  #16  
FNBADAZ06
CF Senior Member
 
FNBADAZ06's Avatar
 
Member Since: Jun 2009
Posts: 6,042
Received 269 Likes on 224 Posts
Default

Originally Posted by SpnkbnkZ06 View Post
Yea they're off 67th and Northern. The anticipation is killing me!
Nacho needs that spray installed !!!!!! LOL

Can't wait to see the finished product
FNBADAZ06 is offline  
The following users liked this post:
SpnkbnkZ06 (07-09-2019)
Old 07-09-2019, 05:27 PM
  #17  
GTIMANiac
CF Member
 
GTIMANiac's Avatar
 
Member Since: Nov 2014
Location: Phoenix
Posts: 80
Likes: 0
Received 19 Likes on 16 Posts
Default

Originally Posted by FNBADAZ06 View Post
So you must be the Yellow ZR! I've been seeing lately LOL
I'm also at 67th/HV
Yeah, I live up by Deems actually where 51st and 55th intersect north of HV. Would love to see your build after it's finished.
GTIMANiac is offline  
Old 07-09-2019, 11:20 PM
  #18  
SpnkbnkZ06
CF Senior Member
Thread Starter
 
SpnkbnkZ06's Avatar
 
Member Since: Feb 2016
Location: Phoenix Arizona
Posts: 346
Received 11 Likes on 11 Posts
Default

Originally Posted by FNBADAZ06 View Post
Nacho needs that spray installed !!!!!! LOL

Can't wait to see the finished product
Yea he needs to put it on already!!
SpnkbnkZ06 is offline  
Old 07-11-2019, 10:23 AM
  #19  
Pb82 Ronin
CF Senior Member
 
Pb82 Ronin's Avatar
 
Member Since: Oct 2012
Location: Out back
Posts: 2,785
Received 121 Likes on 96 Posts
Default

Dang, What did a build like that cost if you don't mind me asking?
Pb82 Ronin is offline  
Old 07-11-2019, 12:29 PM
  #20  
SpnkbnkZ06
CF Senior Member
Thread Starter
 
SpnkbnkZ06's Avatar
 
Member Since: Feb 2016
Location: Phoenix Arizona
Posts: 346
Received 11 Likes on 11 Posts
Default

Originally Posted by Pb82 Ronin View Post
Dang, What did a build like that cost if you don't mind me asking?
Stopped adding it up after 20k honestly
SpnkbnkZ06 is offline  

Thread Tools
Search this Thread
Quick Reply: [Z06] Big boost build (pic heavy)


Contact Us - About Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

© 2019 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: