2006 Corvette Z06 C6.R Tribute Car
#1
Intermediate
Thread Starter
Member Since: May 2008
Location: Eugene Oregon
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
2006 Corvette Z06 C6.R Tribute Car
2006 Chevrolet Corvette ZO6 2LZ package. This car has never been raced. This was used strictly as a show car. Car is nearly mint, garage kept. 32,500 miles. $44K Contact Evan at 334-221-0214
Features:
East Coast Supercharging, LLC did the following work to this car:
Katech LS7 Torquer cam package includes cam, springs, retainers and timing chain
Replaced 16x Valve Guides with bronze guides; valve job; blend, Mill Cyl Heads
R&R Cylinder Heads & Camshaft; Install ARP studs
GM Head Gasket
GM Front Timing COver Gasket, All LSx
GM Water Pump Gasket, All LSx
ARP Head Stud Kit 04+LSx
Smith Brothers pushrods 3/8" x 8.045" x .080" wall 5/32" R both ends (each)
NGK spark Plug TR6
Dyno'd at 532 HP
*Receipt is available*
Additional Features:
Bullet Exhaust
ZR1 Carbon Kit (Spoiler, Splitter, Side skirts)
Wilwood W6A Front Calipers
ECS Spindle Ducts
K&N Intake
Lingenfelter high capacity dry sump tank
C6.R Decal Setup (Modeled after Pratt and Miller's C6.R race car)
Spyder 18/19 wheels
Custom C6.R Tint
Rear Tires: New Hankook Ventus V12 Evo2 rear tires 325/30/ZR19
Front Tires: General Exclaim UHP 275 35 ZR18 (75% tread left)
Lowered 1"
Check out her sound here: https://www.youtube.com/watch?v=Fzajf3jVN2A
More pictures here: http://portland.craigslist.org/grg/cto/5146468587.html
Car is located in Eugene, OR.
Most recent car shows:
9th Annual Fall Classic in Ashland, Oregon (2014)
Roadster Show in Springfield, Oregon (2015)
Papa's Toys in Cornelius, Oregon (2015)
Corvettes in the Park, Cottage Grove, Oregon (2015)
Evan 334-221-0214
Features:
East Coast Supercharging, LLC did the following work to this car:
Katech LS7 Torquer cam package includes cam, springs, retainers and timing chain
Replaced 16x Valve Guides with bronze guides; valve job; blend, Mill Cyl Heads
R&R Cylinder Heads & Camshaft; Install ARP studs
GM Head Gasket
GM Front Timing COver Gasket, All LSx
GM Water Pump Gasket, All LSx
ARP Head Stud Kit 04+LSx
Smith Brothers pushrods 3/8" x 8.045" x .080" wall 5/32" R both ends (each)
NGK spark Plug TR6
Dyno'd at 532 HP
*Receipt is available*
Additional Features:
Bullet Exhaust
ZR1 Carbon Kit (Spoiler, Splitter, Side skirts)
Wilwood W6A Front Calipers
ECS Spindle Ducts
K&N Intake
Lingenfelter high capacity dry sump tank
C6.R Decal Setup (Modeled after Pratt and Miller's C6.R race car)
Spyder 18/19 wheels
Custom C6.R Tint
Rear Tires: New Hankook Ventus V12 Evo2 rear tires 325/30/ZR19
Front Tires: General Exclaim UHP 275 35 ZR18 (75% tread left)
Lowered 1"
Check out her sound here: https://www.youtube.com/watch?v=Fzajf3jVN2A
More pictures here: http://portland.craigslist.org/grg/cto/5146468587.html
Car is located in Eugene, OR.
Most recent car shows:
9th Annual Fall Classic in Ashland, Oregon (2014)
Roadster Show in Springfield, Oregon (2015)
Papa's Toys in Cornelius, Oregon (2015)
Corvettes in the Park, Cottage Grove, Oregon (2015)
Evan 334-221-0214
#3
Premium Supporting Vendor
I think removing the glass/fender vent/headlight and vortech stickers would make the car look much better.
I don't often post my .02 and can always appreciate ones self expression.
Car is built the right way going through ECS shop in NJ, that is for sure.
GLWS
I don't often post my .02 and can always appreciate ones self expression.
Car is built the right way going through ECS shop in NJ, that is for sure.
GLWS