FS: 07 z51, cammed (441rwhp) with 108k miles
08-22-2017, 07:12 PM
#1
Advanced
Thread Starter
07 z51, cammed (441rwhp) with 108k miles
Looking to sell my 2007 Corvette . It's Victory Red with black interior, 3lt, with a glass roof. I just put in brand new headlights with black bezels in June, courtesy of RLSebring. It has every option ( I think) except for magnetic ride and NPP exhaust. Navigation, heated seats, glass roof, dual power seats, HUD, and the z51 package.
I bought the car in October of 2014 from a member on ls1tech, with 80k miles. Currently has 108xxx miles, going up since I daily drive the car. The previous owner put in a custom grind cam by Bluecat, (there's a picture with the specs), BTR spring kit, BTR pushrods, ported stock TB, vararam CAI, and MSD plug wires, and a z06 clutch . Also has OBX longtube headers, OBX X pipe, and stock muffler. Car made 441rwhp and 407 rwtq and drives perfect.
Appearance wise, the car has DDM tuning HID foglights, z06 rear spoiler, GM splash guards, 20% tint, lowered on stock bolts. I put on some black emblem overlays, and a few light overlays as well. I also put on a black halo roof panel instead of the stock body color one.
Car has stock size c6z06 wheels in black, with Michelin Pilot Super Sport tires. The rears are slightly wider at 295/35/19 since the stock size was out of stock when I ordered tires. Tires were ordered in Sep of 2015.
The interior is in great shape, with minor bolster wear. The latch on the center console is broken. I wrapped the top of the console with a padded top. Also put in LED lighting in the whole interior.
The bad - The car has a power steering leak, CEL for p2068 (fuel level sensor 2 high voltage),one bad TPMS sensor (fixed 9.19.17), some scratches on the passenger side rocker panel, and a few scratches on the nose of the front bumper. The main reason I'm wanting to sell is because I just moved, and would rather have a newer car with no issues and a warranty, since I have no place to work on my car where I moved to. The fuel gauge doesn't work due to the code, I just use the trip odometer and fill up accordingly. I have to fill the power steering about once a week.
Since I've had the car, I've replaced the waterpump, Melling high pressure oil pump, ATI harmonic balancer, and radiator.
I'm currently in Roanoke, Virginia, with the car still registered and titled in SC (bank still has the title). I can take any other pictures requested as well (sorry for the car being dirty, I moved to a new town and have yet to make it to a carwash). I'm looking to get $15k.
pictures at https://imgur.com/a/fyQ7V
I bought the car in October of 2014 from a member on ls1tech, with 80k miles. Currently has 108xxx miles, going up since I daily drive the car. The previous owner put in a custom grind cam by Bluecat, (there's a picture with the specs), BTR spring kit, BTR pushrods, ported stock TB, vararam CAI, and MSD plug wires, and a z06 clutch . Also has OBX longtube headers, OBX X pipe, and stock muffler. Car made 441rwhp and 407 rwtq and drives perfect.
Appearance wise, the car has DDM tuning HID foglights, z06 rear spoiler, GM splash guards, 20% tint, lowered on stock bolts. I put on some black emblem overlays, and a few light overlays as well. I also put on a black halo roof panel instead of the stock body color one.
Car has stock size c6z06 wheels in black, with Michelin Pilot Super Sport tires. The rears are slightly wider at 295/35/19 since the stock size was out of stock when I ordered tires. Tires were ordered in Sep of 2015.
The interior is in great shape, with minor bolster wear. The latch on the center console is broken. I wrapped the top of the console with a padded top. Also put in LED lighting in the whole interior.
The bad - The car has a power steering leak, CEL for p2068 (fuel level sensor 2 high voltage),
Since I've had the car, I've replaced the waterpump, Melling high pressure oil pump, ATI harmonic balancer, and radiator.
I'm currently in Roanoke, Virginia, with the car still registered and titled in SC (bank still has the title). I can take any other pictures requested as well (sorry for the car being dirty, I moved to a new town and have yet to make it to a carwash). I'm looking to get $15k.
pictures at https://imgur.com/a/fyQ7V
Last edited by cthompson07; 10-18-2017 at 03:13 PM.
09-09-2017, 09:08 AM
#5
Advanced
Thread Starter
Per the suggestion of a member, I'll post a few videos. Later today I will make a video of the car idling to give an idea of the size of the cam. This video is from when I had it on the dyno.
10-18-2017, 08:26 AM
#13
Advanced
Thread Starter
Price dropped to $15,000 and added a link with better pictures. Need to sell this before I have to pay SC taxes and switch my license over to VA.
https://imgur.com/a/fyQ7V
https://imgur.com/a/fyQ7V
Last edited by cthompson07; 10-18-2017 at 03:14 PM.
