FS: 2007 Corvette FS / FT- WideBody - 418 TSP Engine
04-19-2018, 10:42 AM
#1
Advanced
Thread Starter
2007 Corvette FS / FT- WideBody - 418 TSP Engine
Car has 55K miles runs great and is fast. Only driven on weekends with good weather. Has complete Z06 Clone kit. Z06 Fenders, Hood, Nose, Front and rear Spoiler, Z06 6-Piston front calipers, with 4 Piston rear calipers, with the oversized drilled/slotted rotors, front and rear sway bars. Car has Auto Transmission w/ Paddle Shifters.
Wheels:
360 Forged Split 7 wheels.
20X10 Front - Toyo Proxes TR - 275/30/20
20X13 Rear - Toyo Proxes TR - 345/25/20
Engine:
Texas Speed & Performance - 418 Cubic Inch Stroker LS3 Longblock (HAVE RECIEPT WITH COMPLETE BUILDSHEET)
600 HP at flywheel
Engine was professionally installed and tuned by LMR Performance here in Houston (HAVE RECIEPTS)
1 yr old roughly and less than 3k miles on new engine.
Upgrades:
Kooks Long tube headers / Mid Pipe
3 Inch Z06 bi-mode exhaust with Muffler Mod w/ Mild 2 Wild Switch. (Pictured with the old Borla Exhaust)
Vararam Cold Air intake
160 Thermostat
FAST 102 Intake
FAST 50LB injectors
NGK Spark Plugs
MSD Wires w/ Coil Relocation kit
Elite Engineering Catch Can
Only negative I can think of on car is Cam is a little too large for stock converter. I was going to put in a stall but then decided to sell. The new owner can decide if he wants to do it or not.. at a complete stop the car does try to push through the brakes some but I've already grown accustomed to bumping car up into Neutral when im pulling up to a stop light.
30K OBO. Would possibly be interested in a trade for bolt on only C6 Z06 or newer truck. Has to be blue title only.
Wheels:
360 Forged Split 7 wheels.
20X10 Front - Toyo Proxes TR - 275/30/20
20X13 Rear - Toyo Proxes TR - 345/25/20
Engine:
Texas Speed & Performance - 418 Cubic Inch Stroker LS3 Longblock (HAVE RECIEPT WITH COMPLETE BUILDSHEET)
600 HP at flywheel
Engine was professionally installed and tuned by LMR Performance here in Houston (HAVE RECIEPTS)
1 yr old roughly and less than 3k miles on new engine.
Upgrades:
Kooks Long tube headers / Mid Pipe
3 Inch Z06 bi-mode exhaust with Muffler Mod w/ Mild 2 Wild Switch. (Pictured with the old Borla Exhaust)
Vararam Cold Air intake
160 Thermostat
FAST 102 Intake
FAST 50LB injectors
NGK Spark Plugs
MSD Wires w/ Coil Relocation kit
Elite Engineering Catch Can
Only negative I can think of on car is Cam is a little too large for stock converter. I was going to put in a stall but then decided to sell. The new owner can decide if he wants to do it or not.. at a complete stop the car does try to push through the brakes some but I've already grown accustomed to bumping car up into Neutral when im pulling up to a stop light.
30K OBO. Would possibly be interested in a trade for bolt on only C6 Z06 or newer truck. Has to be blue title only.
The following users liked this post:
Thebigblue (08-10-2018)
