Notices
C6 Corvettes for Sale Private Classifieds, Used C6 Corvettes For Sale, and Modified or Stock Corvettes

FS: Find a buyer, earn $250! 1200hp c6 z06

Thread Tools
 
Search this Thread
 
Old 08-01-2018, 07:36 PM
  #1  
croatbob
Drifting
Thread Starter
 
croatbob's Avatar
 
Member Since: Oct 2011
Location: pembroke pines (broward) florida
Posts: 1,709
Received 16 Likes on 16 Posts
Default Find a buyer, earn $250! 1200hp c6 z06

please share on your social media and with friends to make cold hard cash!!! If your referral gets my car sold, I will give you $250 spotters fee!



























Extremely fun and super reliable street/strip z06. Big dollar build, no short cuts taken. Driven not hidden but it's time for a new toy after owning this bad boy for 5 years. Clean car-fax, no accidents and about 60k deep in mods excluding cost of vehicle. (45k)




Mod list below




Engine : RHS 6 bolt block, Callies crank, Compstar rods, 9.8:1 compression, Mast 305 heads, ARP head studs, Harland sharp rockers, Stage 4 FI cam, Dual springs, Stock manifold, 3-4000 miles on the engine.




Induction : Vortech YSI supercharger, A&A 10 rib direct drive system, 2.7 pulley, Dual 50mm Tial bov's, custom inlet piping, A&A intercooler, 4-5000 miles on blower.




Fuel System : Fore dual drop in fuel system, 1680cc injectors, Alky Dual nozzle meth kit, e85 flex fuel sensor to run both pump and E85




Transmission : Rpm transmissions 2 speed power-glide with 3600 stall converter with Trans-brake. 500 miles on transmission. IF YOU PREFER A 6 SPEED. SELL THE GLIDE SET UP AND GO BACK TO 6 SPEED. YOU WOULD GET MORE FOR A USED GLIDE SET UP THAN IT WOULD COST FOR A NEW TR6060 AND CLUTCH!




Exhaust : Kooks 1 7/8th headers, Dual 3 inch exhaust with 2 bullet mufflers dumped before transmission,




Differential : Stock Z06 diff with 3.42 gears, DSS 1500hp billet axles and LG drag spindles to allow 15 inch rear rims.




Wheels : Weld 15x10 bead locks and 18x4.5 front skinnies , 275 x 28 inch Mickey Thompson pro radials on the rear, 5 inch x 28 inch skinnies up front,




Suspension : Stock suspension with stock bolts wound up and front sway bar removed.




Under hood : 240 amp alternator, D3 engineering Dual radiator fans on a cut down Dewitts Radiator, Dual custom catch cans, Hood spacers to extract heat.




Cosmetic :ZR1 front carbon fiber lip and side skirts, Black out tail and side marker kit, Carbon fiber interior trim kit.




Condition : Interior 8/10 and body and paint 8/10. I am not the show car guy as you can probably see. I drive them and little marks and street wear don't burn at me like it does the show car guys. Driven not hidden. It is still in excellent condition for a 11 year old vehicle. Low mileage. Approx 34000 miles




Performance : 940 whp on a mustang dyno which reads approx 12% lower than a dyno-jet dyno which is what is more commonly used. This would estimate the engine horse power to be approx 1200 hp. The Z06 has been bullet proof for my 5 years of ownership. It has only made 2 x 1/4 mile passes. 9.80 @151 mph and 9.66 @ 154 mph on a poorly prepared track. This Z will run 8s with a well prepped track and some seat time. 154 mph indicates that a mid 8 1/4 miles is only a few test hits away!




Conclusion : This corvette is not a problem car that is being cut lose. It is a reliable, fun car with nothing to spend. NO trades or part outs. The only thing stopping this car from being a low 8 second car is an air 2 water inter-cooler as the A&A cooler that come with the kit is now a restriction.

$48000 ono
Located South Florida




For further questions message me. For more pics and videos, visit my insta-gram page under name Vehiclecustomizationexpert .

Last edited by croatbob; 08-01-2018 at 07:54 PM.
Old 08-04-2018, 05:29 PM
  #2  
croatbob
Drifting
Thread Starter
 
croatbob's Avatar
 
Member Since: Oct 2011
Location: pembroke pines (broward) florida
Posts: 1,709
Received 16 Likes on 16 Posts
Default

Saturday bump.
Old 08-05-2018, 09:09 AM
  #3  
BLWN1
Drifting
 
BLWN1's Avatar
 
Member Since: Feb 2006
Posts: 1,631
Received 20 Likes on 18 Posts

Default

So 250 off.
Old 08-05-2018, 07:26 PM
  #4  
croatbob
Drifting
Thread Starter
 
croatbob's Avatar
 
Member Since: Oct 2011
Location: pembroke pines (broward) florida
Posts: 1,709
Received 16 Likes on 16 Posts
Default

Originally Posted by BLWN1
So 250 off.
How did you come to that conclusion?
Old 08-05-2018, 08:31 PM
  #5  
lbzraptor
Drifting
 
lbzraptor's Avatar
 
Member Since: Oct 2013
Posts: 1,457
Received 85 Likes on 66 Posts

Default

If BLWN1 wants to buy it and nobody referred him then he should get the 250 bucks off the car right? Good looking car at a good price. If I didn't have the one I have albeit with half the horsepower I would definitely be interested.
Old 08-06-2018, 09:54 AM
  #6  
croatbob
Drifting
Thread Starter
 
croatbob's Avatar
 
Member Since: Oct 2011
Location: pembroke pines (broward) florida
Posts: 1,709
Received 16 Likes on 16 Posts
Default

Let me clarify. Its a simple dealers referral fee. You put the buyer onto me you get $250. Via what ever means. FB post, an uncle, an auntie, cousin, sister, brother, co-worker. I don't care. The buyer can't claim a referral fee for referring himself. Could he negotiate $250 off the price. Most likely but that's not how a referral fee works. I have people sharing my social media for sale post on to their walls and i am getting responses from their post. That person qualifies for the $250 on a successful sale. I have someone trying to get the vehicle financed as we speak. If they are approved, his friend who showed him my for sale post gets the $250.
Old 08-07-2018, 02:49 PM
  #7  
BELLMAN
Instructor
 
BELLMAN's Avatar
 
Member Since: Sep 2006
Location: Bremen Indiana
Posts: 178
Likes: 0
Received 0 Likes on 0 Posts

Default

Outstanding car ! Best of luck.

Get notified of new replies

To Find a buyer, earn $250! 1200hp c6 z06




Quick Reply: FS: Find a buyer, earn $250! 1200hp c6 z06



All times are GMT -4. The time now is 02:54 AM.