Lets see pics of your nitrous setups :)
09-29-2008, 01:07 AM
#3
I'm almost done with the fogger install on my car. Friday I pulled my intake and started plumbing it. Tonight I went out into the shop for a while and finished bending the last bit of tubing. All in all I've spent ~3-4 hours on it. There's a few spots I'm not 100% happy with, but I'll tweak them a little later. The stand alone fuel system is mounted in the right front side of the engine bay. Wednesday night I'm going to try to make it to the valley to make a few passes.
Basic highlights...
*Cold Fusion Direct Port Fogger - capable of up to 600hp
*Cold Fusion digital progressive controller
*Cold Fusion dual outlet purge
*Parker -6 feed line
*Nitro Dave's digital controller
*Nitro Dave's stand alone fuel system - low pressure
*Nitro Dave's inline nitrous filter
BTW, I also use HP Tuners, plugs are TR8's and the fuel is VP.
I actually built this engine to put in my '67 Camaro, but it was just too tempting to not try it out in the Z06 first.
Basic highlights...
*Cold Fusion Direct Port Fogger - capable of up to 600hp
*Cold Fusion digital progressive controller
*Cold Fusion dual outlet purge
*Parker -6 feed line
*Nitro Dave's digital controller
*Nitro Dave's stand alone fuel system - low pressure
*Nitro Dave's inline nitrous filter
BTW, I also use HP Tuners, plugs are TR8's and the fuel is VP.
I actually built this engine to put in my '67 Camaro, but it was just too tempting to not try it out in the Z06 first.
Last edited by Super4x4Duty; 09-29-2008 at 01:10 AM.
09-29-2008, 09:03 AM
#4
Instructor
Member Since: Nov 2005
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
[QUOTE=Super4x4Duty;1567282211]I'm almost done with the fogger install on my car. Friday I pulled my intake and started plumbing it. Tonight I went out into the shop for a while and finished bending the last bit of tubing. All in all I've spent ~3-4 hours on it. There's a few spots I'm not 100% happy with, but I'll tweak them a little later. The stand alone fuel system is mounted in the right front side of the engine bay. Wednesday night I'm going to try to make it to the valley to make a few passes.
Basic highlights...
*Cold Fusion Direct Port Fogger - capable of up to 600hp
*Cold Fusion digital progressive controller
*Cold Fusion dual outlet purge
*Parker -6 feed line
*Nitro Dave's digital controller
*Nitro Dave's stand alone fuel system - low pressure
*Nitro Dave's inline nitrous filter
BTW, I also use HP Tuners, plugs are TR8's and the fuel is VP.
I actually built this engine to put in my '67 Camaro, but it was just too tempting to not try it out in the Z06 first.
Now we're talking, please let us know how she runs.
Basic highlights...
*Cold Fusion Direct Port Fogger - capable of up to 600hp
*Cold Fusion digital progressive controller
*Cold Fusion dual outlet purge
*Parker -6 feed line
*Nitro Dave's digital controller
*Nitro Dave's stand alone fuel system - low pressure
*Nitro Dave's inline nitrous filter
BTW, I also use HP Tuners, plugs are TR8's and the fuel is VP.
I actually built this engine to put in my '67 Camaro, but it was just too tempting to not try it out in the Z06 first.
Now we're talking, please let us know how she runs.
09-30-2008, 01:33 AM
#7
Safety Car
RN77X or something like that has the HSW plate kit...really sneaky indeed! 
If you want the ultimate sleeper... I believe nitrous outlet has the money maker setup... you'll love that one!!
If you want the ultimate sleeper... I believe nitrous outlet has the money maker setup... you'll love that one!!
10-08-2008, 11:18 AM
#8
Pro
Member Since: Sep 2007
Location: chester springs pa
Posts: 738
Likes: 0
Received 0 Likes
on
0 Posts
is there anyway to hide the bottle in the drives side trunk. I was looking around and it looks like the gas tank is far enough away to clear it. I would love to keep it all hidden in the cubby hole onthe drivers side
10-08-2008, 12:12 PM
#9
ZO6 Owner
The nitrous noid is under the right FRC. The Interface and Window switch are in my glovebox. The switches are under the tombstone in the center console. All this prolly makes you think I'm hiding my nitrous setup. However, check out where the bottle is:
10-09-2008, 12:30 PM
#11
Former Vendor
Member Since: Nov 2006
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Everytime I see those pics I like it even more! Something about the sleekness of all black...
We're putting together a black C6 now and this makes me want to keep it all black.
Nick
We're putting together a black C6 now and this makes me want to keep it all black.
Nick
10-09-2008, 04:04 PM
#12
ZO6 Owner
Great work!
10-15-2008, 11:56 AM
#17
Former Vendor
Member Since: Nov 2006
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Same with all you other guys.
Nick
