LS3/A6 with A&A Si-Trim goes 9.75 at 139mph
#45
Melting Slicks
no.. thats not what im saying i know flash is faster then me.. all im saying is some one in houston ran faster with a stock motor bottle fed ls3.. but i dont see his name up there
#47
Le Mans Master
#50
Le Mans Master
#51
stock motor was too strong, we jetted up several times and it just kept taking it and going faster lol. motor looked good when it was pulled, but i had plans of more power hopefully i can make it out to the track soon and clobber my old 9.8@142 pass
#52
#53
Burning Brakes
Thread Starter
Member Since: Feb 2004
Location: Camarillo/Oxnard CA
Posts: 1,130
Likes: 0
Received 0 Likes
on
0 Posts
#55
Burning Brakes
Thread Starter
Member Since: Feb 2004
Location: Camarillo/Oxnard CA
Posts: 1,130
Likes: 0
Received 0 Likes
on
0 Posts
Best 60ft's were footbraking it to 2400rpm and stabbing it off the tree. That was the max rpm I could get without pushing thru the brakes, but it worked for low 1.4x 60ft everytime.
#58
Safety Car
Member Since: Feb 2008
Location: TEXOMA
Posts: 3,712
Likes: 0
Received 3 Likes
on
3 Posts
St. Jude Donor '08-'09
what RPM are you taking that LS3 up to?
Im calculating 52000 blower speed (max) at only 6000 rpms with the 3.0 pulley. And 60,000 rpms at 6900 rpms! like to see how long that last! Im jealous!
Im calculating 52000 blower speed (max) at only 6000 rpms with the 3.0 pulley. And 60,000 rpms at 6900 rpms! like to see how long that last! Im jealous!
#59
Burning Brakes
Thread Starter
Member Since: Feb 2004
Location: Camarillo/Oxnard CA
Posts: 1,130
Likes: 0
Received 0 Likes
on
0 Posts
At least it's a self-contained unit and we don't have to worry about sending trash into our oil pan if it let's go. We aren't the only ones that have been spinning blowers past max impeller speeds.