RPM Transmissions billet powerglide bellhousing!!!
#1
Former Vendor
Thread Starter
RPM Transmissions billet powerglide bellhousing!!!
We tested our first powerglide conversion cars this past weekend. All went well.
We took a few pictures today of the bellhousing in its raw state and finished.
This bellhousing allows the use of a standard PG/TH400 converter with no machining or spacers.
LOTS OF MACHINE TIME!!!! Over 40 lbs removed...
We took a few pictures today of the bellhousing in its raw state and finished.
This bellhousing allows the use of a standard PG/TH400 converter with no machining or spacers.
LOTS OF MACHINE TIME!!!! Over 40 lbs removed...
Last edited by TJ@RPMtransmissions; 03-06-2012 at 03:24 PM.
#7
Former Vendor
#10
Procharged F1X 7.18 @ 197
Member Since: Feb 2002
Location: Staten Island NY
Posts: 2,321
Likes: 0
Received 2 Likes
on
2 Posts
St. Jude Donor '09-'10-'11
Not for nothing TJ, but I could probably use the unmachined billet wheel at my store.
Pizza fits perfect.
BTW. How is my Turbo 400....
.
Pizza fits perfect.
BTW. How is my Turbo 400....
.
Last edited by joe11204; 03-08-2012 at 02:36 PM.
#11
Former Vendor
#13
Melting Slicks
Member Since: Mar 2002
Location: Toronto Ontario
Posts: 3,426
Likes: 0
Received 0 Likes
on
0 Posts