Lethal Racing ECS SL1500 621whp/592tq
03-26-2012, 12:41 AM
#1
Racer
Thread Starter
Member Since: Jul 2011
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
Lethal Racing ECS SL1500 621whp/592tq
So here is my long promissed thread! For those who have not been following here is the details on the build.
2011 C6 6MT (Stock headers and X pipe!)
ECS SL1500 Supercharger Kit w/Tial Q bov.
MSD Boost A Pump
Lethal Racing "Night Fury" cam
Pac 1208 Dual Valve springs
LR 7.425 Pushrods
LS3 Ported oil pump
C5R timing chain
RX oil catch can and valve cover brether with internal check valve
3 Gauge pillar pod
Prosport premium series Wideband AF gauge (white/blue)
Prosport premium series Fuel psi gauge (white/blue)
Prosport premium series boost gauge (white/blue)
All installed and tuned buy the guys at Lethal Racing!
I cant say enough about Lethal Raicing! Shawn thanks for all the patience and phone calls getting my build all set up. And for getting it done in the time frame I had to deal with! Nick thanks for all the help deciding the little things I was unsure of! And for nudging me in the right direction from time to time. Most of all for all the pics, and vids to my phone updating me on everything along the way! I was/am VERY impressed. And Mike for jumping through hoops with nick to get it all done! Even my wife said she had a great time haning out with the guys!
Not only was the pricing at Lethal the best I could find, but thier work on the LS motors shows! Every time I was there it was like a big HP LS car show. 600-1000whp all over there. And thanks again nick for the ride in the 750whp camaro! WOW!!!
Ok so onto the pics and vids I promised!
The first vid Nick put together for me and it turned out really well. I have a ton of vids and pics from his updates as well. Some made the video and some didnt. Anyways here it all is! Thanks again Lethal! 
And for anyone on the fence, give them a call you wont be dissapointed! Drop your car off and you might even get a steak dinner out the deal! 
Dyno after ECS install!
Stock with SLP Loudmouth II axle back exhaust overlap with ECS
Video Nick put togeher! Thanks again!
Dyno Clip (quality is a little off sorry)
10psi Clip
ECS and Night Fury Cam cold start
Another cold start (dont worry, getting new plates next week
A little reving to hear the Tial bov! Soooo loud!!!
Next post will be pics. Need to get them off my phone first.
2011 C6 6MT (Stock headers and X pipe!)
ECS SL1500 Supercharger Kit w/Tial Q bov.
MSD Boost A Pump
Lethal Racing "Night Fury" cam
Pac 1208 Dual Valve springs
LR 7.425 Pushrods
LS3 Ported oil pump
C5R timing chain
RX oil catch can and valve cover brether with internal check valve
3 Gauge pillar pod
Prosport premium series Wideband AF gauge (white/blue)
Prosport premium series Fuel psi gauge (white/blue)
Prosport premium series boost gauge (white/blue)
All installed and tuned buy the guys at Lethal Racing!
I cant say enough about Lethal Raicing! Shawn thanks for all the patience and phone calls getting my build all set up. And for getting it done in the time frame I had to deal with! Nick thanks for all the help deciding the little things I was unsure of! And for nudging me in the right direction from time to time. Most of all for all the pics, and vids to my phone updating me on everything along the way! I was/am VERY impressed. And Mike for jumping through hoops with nick to get it all done! Even my wife said she had a great time haning out with the guys!
Not only was the pricing at Lethal the best I could find, but thier work on the LS motors shows! Every time I was there it was like a big HP LS car show. 600-1000whp all over there. And thanks again nick for the ride in the 750whp camaro! WOW!!!
Ok so onto the pics and vids I promised!
The first vid Nick put together for me and it turned out really well. I have a ton of vids and pics from his updates as well. Some made the video and some didnt. Anyways here it all is! Thanks again Lethal! And for anyone on the fence, give them a call you wont be dissapointed! Drop your car off and you might even get a steak dinner out the deal! Dyno after ECS install!
Stock with SLP Loudmouth II axle back exhaust overlap with ECS
Video Nick put togeher! Thanks again!
Dyno Clip (quality is a little off sorry)
10psi Clip
ECS and Night Fury Cam cold start
Another cold start (dont worry, getting new plates next week
A little reving to hear the Tial bov! Soooo loud!!!
Next post will be pics. Need to get them off my phone first.
Last edited by Deezee757; 03-26-2012 at 01:36 AM.
03-26-2012, 01:17 AM
#2
Racer
Thread Starter
Member Since: Jul 2011
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
On to the pics!!!
Getting started
Cars not new anymore! lol exact quote from nick when he sent me this pic!
Motor open
Out with the old
Left is what came with the kit, right is the RX catch can we upgraded to. Thanks Nick!
Left it the standard ECS filter, right is the RX untit with the internal check valve
Just in case it gets hot!
Installing! Nice touch right?
Intercooler...
Tial bov. Sound is AMAZING!!!
ECS going in
My new phone background!
Can all installed tucked away very nice!
Mmmmmm......car ****.....
Thank you ECS!!!
Once again, my biggest thanks to the lethal crew! I'll be back for the next go round of mods for sure! The car is amazing, and EXACTLY what I wanted! You guys rock!!!!
Cars not new anymore! lol exact quote from nick when he sent me this pic!
Motor open
Out with the old
Left is what came with the kit, right is the RX catch can we upgraded to. Thanks Nick!
Left it the standard ECS filter, right is the RX untit with the internal check valve
Just in case it gets hot!
Installing! Nice touch right?
Intercooler...
Tial bov. Sound is AMAZING!!!
ECS going in
My new phone background!
Can all installed tucked away very nice!
Mmmmmm......car ****.....
Thank you ECS!!!
Once again, my biggest thanks to the lethal crew! I'll be back for the next go round of mods for sure! The car is amazing, and EXACTLY what I wanted! You guys rock!!!!
Last edited by Deezee757; 03-26-2012 at 01:34 AM.
03-26-2012, 03:15 AM
#5
Safety Car
Looks good
I love the car so much more now!
03-26-2012, 10:41 PM
#13
Drifting
Eric,
Thank you for deciding to come to Lethal Racing. We had a great time on your build. It seems like you are having lots of fun already. Keep it safe. We certainly look forward to help you with your future mods.
Shawn
Thank you for deciding to come to Lethal Racing. We had a great time on your build. It seems like you are having lots of fun already. Keep it safe. We certainly look forward to help you with your future mods.
Shawn
03-27-2012, 09:54 AM
#17
Looks like a great combo. Enjoy it! The meth and headers with a retune will yield huge gains.
Jason
Jason
03-27-2012, 10:07 AM
#18
Racer
Thread Starter
Member Since: Jul 2011
Posts: 417
Likes: 0
Received 0 Likes
on
0 Posts
That's what I've been told! probably do headers, meth, fuel system, clutch and who knows what else I'll decide next! Should be good for 750whp. I'll keep the tune super safe so I'd guess 700whp! I just got this done and sure don't NEED any more power! Lol so I'm in no hurry!!
probably do headers, meth, fuel system, clutch and who knows what else I'll decide next! Should be good for 750whp. I'll keep the tune super safe so I'd guess 700whp! I just got this done and sure don't NEED any more power! Lol so I'm in no hurry!!
