Paul's 2010 C6 Z06 picks up 200 rwhp!
#1
Supporting Vendor
Thread Starter
Paul's 2010 C6 Z06 picks up 200 rwhp!
Just got Paul's 2010 C6 Z06 off the dyno. The Crew at DasilvaMotorsports added a A&A V2 Si trim, some shiny new Pfadt headers and a Alky Control Meth kit.
The gains are impressive to say the least-especially for 7.5lbs of boost.
The gains are impressive to say the least-especially for 7.5lbs of boost.
Last edited by Arun@Dasilvamotorsports; 12-21-2012 at 08:02 PM. Reason: name change-from Pete to Paul
#8
Supporting Vendor
Thread Starter
They were almost too nice to install.
#11
Team Owner
I have the same set-up only 1500 blower and ARH 1 7/8's.
It will rev higher but you really feel you don't need too.
No need to ring it out like with a stock motor!
The power is way excess feeling compared to stock.
I short shift then waste the tires lots of POWER!
It will rev higher but you really feel you don't need too.
No need to ring it out like with a stock motor!
The power is way excess feeling compared to stock.
I short shift then waste the tires lots of POWER!
#12
Team Owner