Mrbluedevil88

Who makes that pod and how do you like it?

NJ_phil

AutoMeter 12195:
https://www.summitracing.com/parts/a...FQhAGwodhpMKqw
http://www.westcoastcorvette.com/p-2...5-2013-c6.aspx

I have a brand new double (2 pods) if you want it. $25 + shipping but no plastic push pins to mount it to the pillar cover
https://www.summitracing.com/parts/a...FVEYGwodWD4BWQ

EDIT: It's really nice. I like the fact that it's right there in the field of view when making pulls so I don't have to look down at the dash. The AEM X-Series match the factory gauges pretty much and blend right in. Was almost ready to go with their Cobalt line but went with X-Series because of OBD connectivity

schpenxel

I wish the SLP pod didn't fit so horribly.. I'd really like to use it for a wideband.

NJ_phil

Not sure if you mean the one below, but yes it's crap. The first thing I did when getting in the car is push it back under the OEM trim because it never fit right. Gauges were a cluster **** in my car, mounted the SLP, drilled the cluster bezel, bought the 3 pillar, collided with the SLP, had to put a cluster cover in. Ugh. Rather pull the rack out that deal with that again

schpenxel

Yeah that's the one I was thinking of.. man you've got more electronics in your car than me. I didn't know that was possible

C U IN REARVEIW

THIS is how I want mine to be setup.....have everything to do it.....just can't seem to get my wideband/fuel pressure formulas correct...

schpenxel

What's it doing or not doing?

stevenb8

For those with Pillar install where did you run your wires etc through. Any easy routing tips - tricks for smooth install? I have two gauge pod and aem air fuel and boost gauge to mount.

g23crawler

I ran mine under the weather stripping through the side of the pillar into the top of the fender. If that makes sense

C U IN REARVEIW

I can't get the wideband #'s correct in dashlogic (using plx formula)....but reads correct on gauge...?

C U IN REARVEIW

Vs. Dashlogic?

schpenxel

How far off is it? And do you have a dedicated ground wire ran from the PLX box to dash logic?
I'd do both if SLP pod fit better but if I had to do one or the other it'd be DL

C U IN REARVEIW

Off by a good bit. Will have to look at it again....been awhile since I messed with it

ls1wolf

My dashlogic PLX wideband reading is a bit off as well. saying 13's AFR (when HPT is showing mid 11's)

schpenxel

Weird. Same formula?

ls1wolf

yep