454 F2 Procharger With Dallas Performance Flip Cog drive Kit. Breaking Belts.
02-21-2018, 11:13 AM
#81
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes
on
1,053 Posts
St. Jude Donor '15
Because what’s $6K at this point 
The following users liked this post:
Chiselchst (02-24-2018)
02-21-2018, 04:29 PM
#84
Former Vendor
its a tiny hole back there to get all 3 pipes out of
i really wanted to run 3.5" for the the engine but just not enough room. You can see how close everything is based on the dimensions sketch
i really wanted to run 3.5" for the the engine but just not enough room. You can see how close everything is based on the dimensions sketch
The following users liked this post:
ZEX-Z (10-28-2019)
02-24-2018, 08:42 AM
#87
Instructor
You'll be cutting it close for sure. Hope you're having better luck than I am and we see you there. Can't guarantee my car will be ready. After dealing with several of the local tuner shops (over the past year), I've got a serious case of "tuner blues". But it won't stop me from being a spectator if all else fails. 
02-24-2018, 04:58 PM
#88
Then again why not fit a proper jet engine! Lol
I think G1Pro should make the tail pipe out of billet stainless as well. Then you could have it as a proper collector and use the turbine to pul the exhaust gasses out the headers.
Last edited by chuntington101; 02-24-2018 at 05:01 PM.
02-24-2018, 06:42 PM
#89
Burning Brakes
Thread Starter
I am not really sure what the equation is for Thrust to HP vs Thrust to Force.
I was told through various websites that this engine will move my car from a standstill pretty easily. If thats the case thats a 1:1 ratio in the terms of force required to move the car. Which means this little bastard could actually be making some power.
I was told through various websites that this engine will move my car from a standstill pretty easily. If thats the case thats a 1:1 ratio in the terms of force required to move the car. Which means this little bastard could actually be making some power.
The following users liked this post:
schpenxel (02-26-2018)
The following 2 users liked this post by ZEX-Z:
rajahhindi (03-30-2018),
yur2slo (03-30-2018)
10-28-2019, 11:43 PM
#95
Burning Brakes
Thread Starter
Still here Brothers. I have had an extremely busy year.... Got engaged and it went viral and then got married,and bought a plane. Closed down my old shop and opened Dark Night Specialities in Houston TX off of FM 1960 and 45 North.I took a little bit of a break on the car because after I finished all the work on the car it still had a random misfire. Will be back on it here in a month or so. Need to finish this up.
The following users liked this post:
ZEX-Z (01-17-2020)
10-29-2019, 02:11 PM
#99
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,194 Likes
on
1,053 Posts
St. Jude Donor '15
How about some pics of this plane?
The following users liked this post:
ZEX-Z (01-17-2020)
