9.48 sbe ls3 nitrous
#1
9.48 sbe ls3 nitrous
went out yesterday and pushed the old sled pretty hard. 9.48@144.5
mods
Kentucky speed cam kit
Bluecat tune
1 3/4 lg long tubes
3" x to 3"y to 4" turn down exhaust
honker cai
3200 fti billet converter
nitrous outlet direct port with rod mod stock ls3 intake
225 shot .027 jet with direct port at 55 psi and .012 jet with 110 in the tank and 93 in the car
race stars fronts with hoosier street tires and fbody 16x8 rim on back with 28x11.5x16 qtp on back
2.56 gear car should be 3380-3400 race weight .
mods
Kentucky speed cam kit
Bluecat tune
1 3/4 lg long tubes
3" x to 3"y to 4" turn down exhaust
honker cai
3200 fti billet converter
nitrous outlet direct port with rod mod stock ls3 intake
225 shot .027 jet with direct port at 55 psi and .012 jet with 110 in the tank and 93 in the car
race stars fronts with hoosier street tires and fbody 16x8 rim on back with 28x11.5x16 qtp on back
2.56 gear car should be 3380-3400 race weight .
The following users liked this post:
arc6 (11-08-2016)
#4
Badass! That's getting it done with a nice, simple combo!
#5
Instructor
It's good to see you getting done with a mild setup on nitrous, seems like blowers & turbos have all but taken over. I'm currently sneaking up on jet sizes myself with an sbe LS2, hoping to get to the mid 9s soon. Do you have any pics of your exhaust set up? Also curious if you have any clearance issues with running a 28" tire on a narrow body car? Planning on going to a 275/60/15 soon with hopes that it'll fit. Congrats on your pass.