What Exhaust you high HP guys running?
#1
What Exhaust you high HP guys running?
Hey Everyone,
So just curious what kind of exhaust you high HP Zo6 guys are running or if you are running straight pipes?
My car is making a little over 800 now on pump gas and doing a few more upgrades and possibly going E85 which will put it into the 900's. My car has long tube header and x-pipe with no cats and the rear mufflers are stock but have the Muffler Mod. As of right now i am using the Lingerfelter LNC 2 step to launch. After using the 2 step a few times the welds inside the muffler crack and i keep getting them rewelded. So i thought about having my exhaust guy just remove the mufflers all together and just run straight pipe?
All advice and opinions are greatly appreciated on what I should be running.
So just curious what kind of exhaust you high HP Zo6 guys are running or if you are running straight pipes?
My car is making a little over 800 now on pump gas and doing a few more upgrades and possibly going E85 which will put it into the 900's. My car has long tube header and x-pipe with no cats and the rear mufflers are stock but have the Muffler Mod. As of right now i am using the Lingerfelter LNC 2 step to launch. After using the 2 step a few times the welds inside the muffler crack and i keep getting them rewelded. So i thought about having my exhaust guy just remove the mufflers all together and just run straight pipe?
All advice and opinions are greatly appreciated on what I should be running.
#2
Team Owner
Stock forever then went to bb fusion. Should have stayed stock.
#4
Pro
Was running LG GT4.. Unfortunately my car belches fire every time it gets on the rev limiter.. Melted the packing material in the mufflers, which then solidified and sounded like broken glass.
No fault of LG.. These were great pipes, just not for my race car.
Straight 3" pipes this year
No fault of LG.. These were great pipes, just not for my race car.
Straight 3" pipes this year
#5
Safety Car
Stock NPP with long tubes
#6
Drifting
Straight pipes are for grain trucks. I run a Z06 catback straight to a vacuum source. They open under high load conditions so no real restriction issues.
Last edited by chpmnsws6; 03-23-2017 at 05:29 PM.
The following users liked this post:
Detoxx03 (03-23-2017)
#7
#10
Race Director
Member Since: May 2004
Location: Raleigh, NC
Posts: 16,664
Received 1,193 Likes
on
1,052 Posts
St. Jude Donor '15
Stock w/NPP
Not that I'm really a "high HP" guy, but whatevs
Not that I'm really a "high HP" guy, but whatevs
#11
Drifting
#13
Team Owner
#15
2" headers to dual 3" x pipe to B&B Gen 3 Fusion.
The following users liked this post:
Detoxx03 (03-24-2017)
#17
Pro
Yeh I got to the tailpipes and was like... meh im too lazy to make tips today. Im actually running a 3" BB Fusion at the moment. I switch off every once and awhile. I figured there was going to be at least one person catch the Fahrenheit
Last edited by Ls240sx; 03-24-2017 at 12:39 PM.
#19
3" Corsa Sport