My little c6
07-07-2017, 02:22 PM
#1
Racer
Thread Starter
My little c6
Just feel like being a post ***** today!
So here's my c6. I got bored of my bottle fed coyote and traded in for a c6. It already had the z06 replicas and a intake on it. So once I got home I started looking for a turbo/supercharger. Ended up buying a ECS kit. Then talking to Joe from Cordes Performace in AZ. I ended up ordering Kook long tubes, corsa exhaust and Alky control meth kit along with BTR valvetrain.
Had Cordes install it and Nic D tune it on 91octane w/ meth I made 630whp/581tq on like 10psi.
So from there I decided to buy some Mickey et streets ss 305/35/19 tires, a z06 spoiler. Lower the car a little and bought some eagle eye tail lights.
My boy and I wrap my roof and halo and I tossed in a small system and some mud flaps. Weighed the car and it came in on the scales at 3200 with 1/2 tank of gas no driver.
Just driving and enjoying the car I ended up breaking the radiator support so had a shop make a new tubular one also I ended up buying some BBS wheels. Just need to get some tires for them also I bought some 17" c5z wheels I had powdercoated plan to put slicks on them.
Pictures might be out of order but felt like sharing my car.
So here's my c6. I got bored of my bottle fed coyote and traded in for a c6. It already had the z06 replicas and a intake on it. So once I got home I started looking for a turbo/supercharger. Ended up buying a ECS kit. Then talking to Joe from Cordes Performace in AZ. I ended up ordering Kook long tubes, corsa exhaust and Alky control meth kit along with BTR valvetrain.
Had Cordes install it and Nic D tune it on 91octane w/ meth I made 630whp/581tq on like 10psi.
So from there I decided to buy some Mickey et streets ss 305/35/19 tires, a z06 spoiler. Lower the car a little and bought some eagle eye tail lights.
My boy and I wrap my roof and halo and I tossed in a small system and some mud flaps. Weighed the car and it came in on the scales at 3200 with 1/2 tank of gas no driver.
Just driving and enjoying the car I ended up breaking the radiator support so had a shop make a new tubular one also I ended up buying some BBS wheels. Just need to get some tires for them also I bought some 17" c5z wheels I had powdercoated plan to put slicks on them.
Pictures might be out of order but felt like sharing my car.
Last edited by Jason.; 10-26-2017 at 04:39 PM.
The following users liked this post:
Red✠Baron (09-06-2019)
The following users liked this post:
Red✠Baron (09-06-2019)
07-07-2017, 02:35 PM
#5
Racer
Thread Starter
Playing with my friends 670whp s/c coyote
Playing with a bolt on c5z (my clutch was slipping bad on this run)
Getting trained on by a 800whp GS lol
Playing with a bolt on c5z (my clutch was slipping bad on this run)
Getting trained on by a 800whp GS lol
Last edited by Jason.; 07-07-2017 at 02:42 PM.
The following users liked this post:
Jason. (07-07-2017)
07-07-2017, 05:28 PM
#9
Supporting Vendor
been a pleasure working with you sir!!
__________________
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
Cordes Performance Racing aka "CPR"
Owner of AZ's premier LSX/LTX motorsports shop
http://cordesperformanceracing.com/
www.facebook.com/cordesperformanceracing.com
joe@cordesperformanceracing.com
480-359-5914
The following users liked this post:
Jason. (07-07-2017)
07-08-2017, 07:09 AM
#10
Racer
Thread Starter
07-08-2017, 11:33 AM
#11
Team Owner
Nice setup.
Never had an issue with radiator support on my car, then again it isn't low and I keep the car as high as possible.
Never had an issue with radiator support on my car, then again it isn't low and I keep the car as high as possible.
The following users liked this post:
Jason. (07-08-2017)
07-08-2017, 12:33 PM
#12
Nice stuff man. What part of town u in? I'd love to get a run in with you
I've actually raised my car up a bit after the kit since the weight lowered it a bit. You must have them nice roads up there in the east valley lol
I've actually raised my car up a bit after the kit since the weight lowered it a bit. You must have them nice roads up there in the east valley lol
07-08-2017, 12:34 PM
#13
Racer
Thread Starter
07-08-2017, 01:12 PM
#14
Racer
Thread Starter
I'm over on the westside by Luke base. Pm you
07-12-2017, 01:44 PM
#16
Racer
Thread Starter
07-14-2017, 12:29 AM
#17
Racer
Thread Starter
Just moved into the new house. Still gotta set up the garage but it's getting there slowly but surely.
It's nice to see all the vehicles in one garage tho.
Bagged caddy daily, the bike and the vette.
It's nice to see all the vehicles in one garage tho.
Bagged caddy daily, the bike and the vette.
Last edited by Jason.; 07-14-2017 at 12:31 AM.
The following users liked this post:
Jason. (07-14-2017)
07-14-2017, 03:54 PM
#19
Le Mans Master
Great thread, if I were to do it again I would go with this same kit with a flex fuel set up and be done. I'm scratching and clawing to get 500 rwhp with my heads and cam set up.
The following users liked this post:
Jason. (07-14-2017)
07-14-2017, 03:57 PM
#20
Instructor
