C6 Forced Induction/Nitrous C6 Corvette Turbochargers, Superchargers, Pulley Upgrades, Intercoolers, Wet and Dry Nitrous Injection, Meth
Sponsored by:
Sponsored by:

Supercharger Challenge

Thread Tools
 
Search this Thread
 
Old 09-15-2018, 11:27 AM
  #1  
StevieZ13
Advanced
Thread Starter
 
StevieZ13's Avatar
 
Member Since: Sep 2015
Location: Arizona
Posts: 55
Received 13 Likes on 8 Posts
Default Supercharger Challenge

Good Morning fellow forum members. I just dropped off my stock 2011 GS M6 at Cordes Performance Racing in Tempe AZ yesterday. The baseline numbers were 391 rwhp and 386 rwtq. They are installing an ECS 1500 KIT and an alky control meth kit with a tune. What do you think the final numbers will be? I will post the results of the run and who had the best guess. Dyno jet dyno. Have a great day!!

Last edited by StevieZ13; 09-15-2018 at 01:47 PM. Reason: Add info
Old 09-15-2018, 11:31 AM
  #2  
russ472
Burning Brakes
Support Corvetteforum!
 
russ472's Avatar
 
Member Since: Mar 2014
Location: Lexington South Carolina
Posts: 1,222
Received 197 Likes on 161 Posts

Default

615. good luck
Old 09-15-2018, 11:54 AM
  #3  
harleyreb1
Racer
 
harleyreb1's Avatar
 
Member Since: Oct 2007
Location: Jackson MS
Posts: 271
Received 21 Likes on 21 Posts

Default

585
Old 09-15-2018, 01:10 PM
  #4  
Cordes Performance Racing
Supporting Vendor
 
Cordes Performance Racing's Avatar
 
Member Since: Feb 2009
Location: Mesa Az
Posts: 4,222
Received 1,228 Likes on 775 Posts

Default

Can I throw my guess in haha.
Old 09-15-2018, 01:47 PM
  #5  
StevieZ13
Advanced
Thread Starter
 
StevieZ13's Avatar
 
Member Since: Sep 2015
Location: Arizona
Posts: 55
Received 13 Likes on 8 Posts
Default

Originally Posted by Joe@CPR
Can I throw my guess in haha.
SURE!! I would love to have a guess from the pro 😊
Old 09-15-2018, 02:18 PM
  #6  
Cordes Performance Racing
Supporting Vendor
 
Cordes Performance Racing's Avatar
 
Member Since: Feb 2009
Location: Mesa Az
Posts: 4,222
Received 1,228 Likes on 775 Posts

Default

Originally Posted by StevieZ13
SURE!! I would love to have a guess from the pro 😊
591 is what I think it'll do.
Old 09-15-2018, 03:05 PM
  #7  
StevieZ13
Advanced
Thread Starter
 
StevieZ13's Avatar
 
Member Since: Sep 2015
Location: Arizona
Posts: 55
Received 13 Likes on 8 Posts
Default

Originally Posted by Joe@CPR
591 is what I think it'll do.
That would be nice😊
Old 09-15-2018, 06:19 PM
  #8  
HOXXOH
Race Director
 
HOXXOH's Avatar
 
Member Since: Sep 2007
Location: Peoria/Phoenix AZ
Posts: 16,555
Received 2,061 Likes on 1,505 Posts
C6 of Year Finalist (performance mods) 2019

Default

Originally Posted by StevieZ13
Good Morning fellow forum members. I just dropped off my stock 2011 GS M6 at Cordes Performance Racing in Tempe AZ yesterday. The baseline numbers were 391 rwhp and 386 rwtq. They are installing an ECS 1500 KIT and an alky control meth kit with a tune. What do you think the final numbers will be? I will post the results of the run and who had the best guess. Dyno jet dyno. Have a great day!!
The DynoJet they used to use a few years back, had my full bolt-on '08 at 394hp/354tq and a couple weeks later I ran 10.80 @ 126.84. I rather doubt your stock GS would come close to that. Don't get overly excited about numbers, but just enjoy your car for whatever performance you get.
Old 09-15-2018, 07:26 PM
  #9  
Cordes Performance Racing
Supporting Vendor
 
Cordes Performance Racing's Avatar
 
Member Since: Feb 2009
Location: Mesa Az
Posts: 4,222
Received 1,228 Likes on 775 Posts

Default

Originally Posted by HOXXOH
The DynoJet they used to use a few years back, had my full bolt-on '08 at 394hp/354tq and a couple weeks later I ran 10.80 @ 126.84. I rather doubt your stock GS would come close to that. Don't get overly excited about numbers, but just enjoy your car for whatever performance you get.
Ya he's a stick not a stalled auto ...
Old 09-15-2018, 07:50 PM
  #10  
StevieZ13
Advanced
Thread Starter
 
StevieZ13's Avatar
 
Member Since: Sep 2015
Location: Arizona
Posts: 55
Received 13 Likes on 8 Posts
Default

Originally Posted by HOXXOH
The DynoJet they used to use a few years back, had my full bolt-on '08 at 394hp/354tq and a couple weeks later I ran 10.80 @ 126.84. I rather doubt your stock GS would come close to that. Don't get overly excited about numbers, but just enjoy your car for whatever performance you get.
Info noted.
Old 09-15-2018, 07:52 PM
  #11  
ZR1-ab
Instructor
 
ZR1-ab's Avatar
 
Member Since: Nov 2013
Location: Corpus Christi TEXAS
Posts: 225
Received 29 Likes on 24 Posts
Default

depends on if they max out the s/c or not. but my guess would be 550 for about 12 lbs of boost.
Old 09-18-2018, 08:25 AM
  #12  
DOUG @ ECS
Premium Supporting Vendor
 
DOUG @ ECS's Avatar
 
Member Since: Oct 2004
Location: Providing the most proven supercharger kits for your C5/6/7 609-752-0321
Posts: 23,315
Received 1,085 Likes on 656 Posts

Default

Answer all depends on what your doing, or not doing, with the restrictor plate. To play along I'll go with 650.

Good luck with the build!!
The following users liked this post:
Dealripper (10-27-2018)
Old 09-18-2018, 11:22 AM
  #13  
StevieZ13
Advanced
Thread Starter
 
StevieZ13's Avatar
 
Member Since: Sep 2015
Location: Arizona
Posts: 55
Received 13 Likes on 8 Posts
Default

Thanks for your input Doug. I’ve read a lot of good things about your kit and I’m sure Joe and his guys will put a smile on my face regardless of what the numbers are. Looking forward to enjoying every minute of it!!👍🏻
Old 09-18-2018, 01:02 PM
  #14  
JeremyAZ
Instructor
 
JeremyAZ's Avatar
 
Member Since: Oct 2017
Posts: 124
Likes: 0
Received 13 Likes on 11 Posts
Default

Completely stock with meth and Novi1500?
Restrictor or no?
Old 09-18-2018, 01:30 PM
  #15  
C U IN REARVEIW
Le Mans Master
 
C U IN REARVEIW's Avatar
 
Member Since: Jan 2009
Location: ocean springs mississippi
Posts: 5,656
Received 110 Likes on 101 Posts

Default

what pulley?
Old 09-18-2018, 01:30 PM
  #16  
StevieZ13
Advanced
Thread Starter
 
StevieZ13's Avatar
 
Member Since: Sep 2015
Location: Arizona
Posts: 55
Received 13 Likes on 8 Posts
Default Restrictor Plate or Not?

Originally Posted by JeremyAZ
Completely stock with meth and Novi1500?
Restrictor or no?
completely stock 1500 meth didn’t ask Joe about the restictor plate. I guess that matters. Sorry guys. I’m kind of a newbie to the SC game. Any input Joe?
Old 09-18-2018, 01:32 PM
  #17  
StevieZ13
Advanced
Thread Starter
 
StevieZ13's Avatar
 
Member Since: Sep 2015
Location: Arizona
Posts: 55
Received 13 Likes on 8 Posts
Default

Originally Posted by C U IN REARVEIW
what pulley?
Whatever comes with the base ECS kit?

Get notified of new replies

To Supercharger Challenge

Old 09-18-2018, 01:35 PM
  #18  
JeremyAZ
Instructor
 
JeremyAZ's Avatar
 
Member Since: Oct 2017
Posts: 124
Likes: 0
Received 13 Likes on 11 Posts
Default

Stock pulley is 3.25.
Stock fuel pump still I’m assuming?
depending on how much meth they spray.....
550ish. With restrictor plate

Last edited by JeremyAZ; 09-18-2018 at 01:37 PM.
Old 09-18-2018, 02:07 PM
  #19  
StevieZ13
Advanced
Thread Starter
 
StevieZ13's Avatar
 
Member Since: Sep 2015
Location: Arizona
Posts: 55
Received 13 Likes on 8 Posts
Default

Originally Posted by JeremyAZ
Stock pulley is 3.25.
Stock fuel pump still I’m assuming?
depending on how much meth they spray.....
550ish. With restrictor plate
yes on the stock FP
Old 09-18-2018, 02:36 PM
  #20  
JeremyAZ
Instructor
 
JeremyAZ's Avatar
 
Member Since: Oct 2017
Posts: 124
Likes: 0
Received 13 Likes on 11 Posts
Default

Originally Posted by StevieZ13

yes on the stock FP

Cool man. That’s a good start to the build. I have same kit. Heads, BTR blower cam and Kooks long tubes. With some more fuel you can make some big power. I’m in Phoenix and have a GS 6 speed as well.

Last edited by JeremyAZ; 09-18-2018 at 02:36 PM.


Quick Reply: Supercharger Challenge



All times are GMT -4. The time now is 02:33 AM.