Denis_C6-Z

Yeah that's nice no doubt, guess we will see what next year brings

STL Mike

How many passes do you get out of a bottle (10lb/20lb)?

jayyyw

Haven't ran a full bottle yet but I got 4-5 dyno pulls and 6 2nd-4th gear runs out of my 15lb bottle with a 150 shot. I did purge a little too much to try and get the pressure down.

jayyyw

Bought a nitrous outlet plate. Wonder if there will be a difference in power output with the better spray pattern out of the plate. It has 6 discharge holes instead of one 90 degree nozzle. May also bump the shot to a 175.

Took the car to the drag strip. Only made one pass on nitrous as I was fighting a leak in the nano system. Finally got it to seal and only had time to do one run. It was a horrible 60ft and spinning through most of first but still managed to trap 150mph. I feel like there's more in it. Should be trapping a few mph higher with 800+whp.

Adding 2" headers and an electric water pump as well. Should bump up power output on the same shot, regardless.

gotjuice?

I just used a NANO 3000 kit at the Texas Mile last weekend. The NANO outlasted 20 lbs of Nitrous. The 4500 will not last that long.

Kingtal0n

Is it safe to have a X000psi bottle pointed towards the front of the vehicle?

I've heard of 1000psi nitrous bottle accidents killing people so just wondering what the tradition is regarding this.

jayyyw

I haven't been able to use it 1:1 yet. Fighting leaks right now is getting annoying. Should have it sorted out soon. I was thinking of going to 2 10lb bottles and find the largest HPA carbon fiber tank I can to feed them both. Especially going to a larger shot.

I got, roughly, 5 runs 2nd-4th gear runs and 3 short 2nd-3rd gear runs this weekend. Every hit was exactly the same and it pulled hard on the big end. This system is GREAT for a street car.

jayyyw

Do you know the CU of that 3000psi tank?