C6 Partition and Trunk Organizer(Finally)
#123
Melting Slicks
interest
Of course you wouldn't want to block the back window. The custom ones that I have seen have a thick plexiglass window in them. Reminded me of a Pantera, Lambo or Ferrari with the small window just behind the driver.
The one I saw looked very cool and was practicle too. As long as it was removable I bet you would get some takers. I would buy one for three reasons.
1. Keeps it quiet inside
2. Keeps stuff in the back in the back
3. If done right it looks cool.
Anyone else out there interested?
The one I saw looked very cool and was practicle too. As long as it was removable I bet you would get some takers. I would buy one for three reasons.
1. Keeps it quiet inside
2. Keeps stuff in the back in the back
3. If done right it looks cool.
Anyone else out there interested?
#124
Melting Slicks
question
Southern Car Parts is VERY proud to introduce our two Corvette C6 Cargo Organizing solutions for all C6 Vettes including the Z06 and ZR1. The Original Vette Tray and Partition and the newly launched Vette Tray 2 and Partition combination.
The Original Vette Tray is made of extruded polystyrene (type of industrial foam) which is very strong (for foam) and light weight. It weighs a little less that 3 lbs and is perfect for someone who wants an open solution that is very easy to get things in and out of. Combined with the partition (made of 1/2" MDF board) it is an excellent combination to keep stuff from sliding from the trunk area up to the front of the car and for organizing loose items in the cockpit.
Our second option is the Corvette C6 Vette Tray 2 and Partition
The Vette Tray 2 is made of MDF Board (weighs a bit more than our original Vette Tray (20lbs)) and has hinged lids that are nearly unnoticeable to the casual passer by. designed to be stealthy, the dual compartments give you a place to hide/store items in your Corvette. The Vette Tray 2 also can be combined with our partition for the same reasons as above (keep stuff from sliding all over the car). Unlike the original Vette Tray, the Vette Tray 2 DOES allow you to utilize your partition when the roof is stowed in the back, with the original Vette Tray you need to pop the partition out when your roof is in the back.
Both solutions install and remove without modifying the car.
More information below
Original Vette Tray
Vette Tray 2
The Original Vette Tray is made of extruded polystyrene (type of industrial foam) which is very strong (for foam) and light weight. It weighs a little less that 3 lbs and is perfect for someone who wants an open solution that is very easy to get things in and out of. Combined with the partition (made of 1/2" MDF board) it is an excellent combination to keep stuff from sliding from the trunk area up to the front of the car and for organizing loose items in the cockpit.
Our second option is the Corvette C6 Vette Tray 2 and Partition
The Vette Tray 2 is made of MDF Board (weighs a bit more than our original Vette Tray (20lbs)) and has hinged lids that are nearly unnoticeable to the casual passer by. designed to be stealthy, the dual compartments give you a place to hide/store items in your Corvette. The Vette Tray 2 also can be combined with our partition for the same reasons as above (keep stuff from sliding all over the car). Unlike the original Vette Tray, the Vette Tray 2 DOES allow you to utilize your partition when the roof is stowed in the back, with the original Vette Tray you need to pop the partition out when your roof is in the back.
Both solutions install and remove without modifying the car.
More information below
Original Vette Tray
Vette Tray 2
#128
Melting Slicks
In the 2nd gen unit how deep are the compartments when the lids are closed?
I would really like to see you put two cup holders in the center section between the two lids.
I would really like to see you put two cup holders in the center section between the two lids.
#135
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
Southern Car Parts is VERY proud to introduce our two Corvette C6 Cargo Organizing solutions for all C6 Vettes including the Z06 and ZR1. The Original Vette Tray and Partition and the newly launched Vette Tray 2 and Partition combination.
The Original Vette Tray is made of extruded polystyrene (type of industrial foam) which is very strong (for foam) and light weight. It weighs a little less that 3 lbs and is perfect for someone who wants an open solution that is very easy to get things in and out of. Combined with the partition (made of 1/2" MDF board) it is an excellent combination to keep stuff from sliding from the trunk area up to the front of the car and for organizing loose items in the cockpit.
Our second option is the Corvette C6 Vette Tray 2 and Partition
The Vette Tray 2 is made of MDF Board (weighs a bit more than our original Vette Tray (20lbs)) and has hinged lids that are nearly unnoticeable to the casual passer by. designed to be stealthy, the dual compartments give you a place to hide/store items in your Corvette. The Vette Tray 2 also can be combined with our partition for the same reasons as above (keep stuff from sliding all over the car). Unlike the original Vette Tray, the Vette Tray 2 DOES allow you to utilize your partition when the roof is stowed in the back, with the original Vette Tray you need to pop the partition out when your roof is in the back.
Both solutions install and remove without modifying the car.
More information below
Original Vette Tray
Vette Tray 2
The Original Vette Tray is made of extruded polystyrene (type of industrial foam) which is very strong (for foam) and light weight. It weighs a little less that 3 lbs and is perfect for someone who wants an open solution that is very easy to get things in and out of. Combined with the partition (made of 1/2" MDF board) it is an excellent combination to keep stuff from sliding from the trunk area up to the front of the car and for organizing loose items in the cockpit.
Our second option is the Corvette C6 Vette Tray 2 and Partition
The Vette Tray 2 is made of MDF Board (weighs a bit more than our original Vette Tray (20lbs)) and has hinged lids that are nearly unnoticeable to the casual passer by. designed to be stealthy, the dual compartments give you a place to hide/store items in your Corvette. The Vette Tray 2 also can be combined with our partition for the same reasons as above (keep stuff from sliding all over the car). Unlike the original Vette Tray, the Vette Tray 2 DOES allow you to utilize your partition when the roof is stowed in the back, with the original Vette Tray you need to pop the partition out when your roof is in the back.
Both solutions install and remove without modifying the car.
More information below
Original Vette Tray
Vette Tray 2