C6 Partition and Trunk Organizer(Finally)
02-28-2006, 09:21 PM
#1
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
C6 Partition and Trunk Organizer(Finally)
Southern Car Parts is VERY proud to introduce our two Corvette C6 Cargo Organizing solutions for all C6 Vettes including the Z06 and ZR1. The Original Vette Tray and Partition and the newly launched Vette Tray 2 and Partition combination.
The Original Vette Tray is made of extruded polystyrene (type of industrial foam) which is very strong (for foam) and light weight. It weighs a little less that 3 lbs and is perfect for someone who wants an open solution that is very easy to get things in and out of. Combined with the partition (made of 1/2" MDF board) it is an excellent combination to keep stuff from sliding from the trunk area up to the front of the car and for organizing loose items in the cockpit.
Our second option is the Corvette C6 Vette Tray 2 and Partition
The Vette Tray 2 is made of MDF Board (weighs a bit more than our original Vette Tray (20lbs)) and has hinged lids that are nearly unnoticeable to the casual passer by. designed to be stealthy, the dual compartments give you a place to hide/store items in your Corvette. The Vette Tray 2 also can be combined with our partition for the same reasons as above (keep stuff from sliding all over the car). Unlike the original Vette Tray, the Vette Tray 2 DOES allow you to utilize your partition when the roof is stowed in the back, with the original Vette Tray you need to pop the partition out when your roof is in the back.
Both solutions install and remove without modifying the car.
More information below
Original Vette Tray
Vette Tray 2
The Original Vette Tray is made of extruded polystyrene (type of industrial foam) which is very strong (for foam) and light weight. It weighs a little less that 3 lbs and is perfect for someone who wants an open solution that is very easy to get things in and out of. Combined with the partition (made of 1/2" MDF board) it is an excellent combination to keep stuff from sliding from the trunk area up to the front of the car and for organizing loose items in the cockpit.
Our second option is the Corvette C6 Vette Tray 2 and Partition
The Vette Tray 2 is made of MDF Board (weighs a bit more than our original Vette Tray (20lbs)) and has hinged lids that are nearly unnoticeable to the casual passer by. designed to be stealthy, the dual compartments give you a place to hide/store items in your Corvette. The Vette Tray 2 also can be combined with our partition for the same reasons as above (keep stuff from sliding all over the car). Unlike the original Vette Tray, the Vette Tray 2 DOES allow you to utilize your partition when the roof is stowed in the back, with the original Vette Tray you need to pop the partition out when your roof is in the back.
Both solutions install and remove without modifying the car.
More information below
Original Vette Tray
Vette Tray 2
__________________
Last edited by southerncarparts; 04-28-2010 at 11:14 AM.
02-28-2006, 11:27 PM
#2
Cruising
Member Since: Feb 2006
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
I will take a partition and a tray with cup holders less the try covers in red only for my 2006 C6. I am not sure how to order from you on this website. My regular email is bgoldsmith2@bak.rr.com
I belong to Pay Pay or can pay by credit card or however you wish.
Thank You!
I belong to Pay Pay or can pay by credit card or however you wish.
Thank You!
Originally Posted by southerncarparts
Southern Car Parts is VERY proud to introduce our C6 Partition.
First of it's kind on the market!!! The C6 trunk partition seperates the trunk area from the passenger compartment area. Easily installs with NO MODIFICATIONS to your car. Does not comes loose under hard braking or acceleration. Perfect matching carpet.
This modification is a must for all C6 owners. The C6 Partition keeps loose items from sliding all around your trunk and out of the passenger compartment. Also gives you an area behind the seat to store items.
The partition is compatible with our famous Vette Tray and actually compliment each other very nicely.
The Partition Price is $130.00 with FREE SHIPPING!!!!! Or you can buy the C6 Parition and Vette Tray (with free lids and free shipping) for one easy price of $240.00 (same product combo that we have been offering C5 owners for the last 8 months)
As with all Southern Car Parts products, we offer a full 90 day money back guarantee if you are not satisfied.
For customers that purchased a C6 Vette Tray prior to 2/28/06 we have also have a C6 Partition that will work with your existing Vette Tray. If you have an existing C6 Vette Tray (purchased prior to 2/28/06) and want the C6 Partition order item #002-004. We will also be offering this partition at a reduced price of $110.00 since it was not available in a combo package when customers orignally ordered the C6 Vette Tray.
The Partition and Vette Tray can be used with or without each other.
Important Note: The C6 Partition DOES have to be removed when you roof is being stored in the rear of the car. The partition is very easy to slide out (pull it straight up) and lay it in the back of the car when the roof is stored in the car.
First of it's kind on the market!!! The C6 trunk partition seperates the trunk area from the passenger compartment area. Easily installs with NO MODIFICATIONS to your car. Does not comes loose under hard braking or acceleration. Perfect matching carpet.
This modification is a must for all C6 owners. The C6 Partition keeps loose items from sliding all around your trunk and out of the passenger compartment. Also gives you an area behind the seat to store items.
The partition is compatible with our famous Vette Tray and actually compliment each other very nicely.
The Partition Price is $130.00 with FREE SHIPPING!!!!! Or you can buy the C6 Parition and Vette Tray (with free lids and free shipping) for one easy price of $240.00 (same product combo that we have been offering C5 owners for the last 8 months)
As with all Southern Car Parts products, we offer a full 90 day money back guarantee if you are not satisfied.
For customers that purchased a C6 Vette Tray prior to 2/28/06 we have also have a C6 Partition that will work with your existing Vette Tray. If you have an existing C6 Vette Tray (purchased prior to 2/28/06) and want the C6 Partition order item #002-004. We will also be offering this partition at a reduced price of $110.00 since it was not available in a combo package when customers orignally ordered the C6 Vette Tray.
The Partition and Vette Tray can be used with or without each other.
Important Note: The C6 Partition DOES have to be removed when you roof is being stored in the rear of the car. The partition is very easy to slide out (pull it straight up) and lay it in the back of the car when the roof is stored in the car.
03-01-2006, 07:21 AM
#3
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
Originally Posted by Bruce Goldsmith
I will take a partition and a tray with cup holders less the try covers in red only for my 2006 C6. I am not sure how to order from you on this website. My regular email is bgoldsmith2@bak.rr.com
I belong to Pay Pay or can pay by credit card or however you wish.
Thank You!
I belong to Pay Pay or can pay by credit card or however you wish.
Thank You!
Just sent you an email....You can order from our website at www.southerncarparts.com or I can call you if you send me a number. Or send me an email with your credit card info, name and shipping address and we can also do it that way. Of course, you can also call me directly at 678-464-5476.
03-01-2006, 03:52 PM
#4
Drifting
Member Since: Sep 2005
Location: Rehoboth Beach Delaware
Posts: 1,775
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by southerncarparts
Southern Car Parts is VERY proud to introduce our C6 Partition.
First Combination of it's kind on the market!!! The C6 trunk partition seperates the trunk area from the passenger compartment area. Easily installs with NO MODIFICATIONS to your car. Does not comes loose under hard braking or acceleration. Perfect matching carpet.
First Combination of it's kind on the market!!! The C6 trunk partition seperates the trunk area from the passenger compartment area. Easily installs with NO MODIFICATIONS to your car. Does not comes loose under hard braking or acceleration. Perfect matching carpet.
Much better !!!
03-01-2006, 07:48 PM
#5
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
Originally Posted by RBYCC
Much better !!!
The Partition and matching Cargo Organizer really do a great job of finishing off the back of the Vette
Jim
04-16-2006, 11:25 PM
#6
Do you offer anything that goes all the way to the top to keep it quiet inside like a convertible. When you seal off that rear area you loose the drone from the back tires. Makes a big difference. I have a brand new 06 and I will be your ginney pig if you want to make one.
04-17-2006, 09:18 AM
#7
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
Originally Posted by RD in SD
Do you offer anything that goes all the way to the top to keep it quiet inside like a convertible. When you seal off that rear area you loose the drone from the back tires. Makes a big difference. I have a brand new 06 and I will be your ginney pig if you want to make one.
Sorry,
Jim
04-17-2006, 12:47 PM
#8
Of course you wouldn't want to block the back window. The custom ones that I have seen have a thick plexiglass window in them. Reminded me of a Pantera, Lambo or Ferrari with the small window just behind the driver.
The one I saw looked very cool and was practicle too. As long as it was removable I bet you would get some takers. I would buy one for three reasons.
1. Keeps it quiet inside
2. Keeps stuff in the back in the back
3. If done right it looks cool.
Anyone else out there interested?
The one I saw looked very cool and was practicle too. As long as it was removable I bet you would get some takers. I would buy one for three reasons.
1. Keeps it quiet inside
2. Keeps stuff in the back in the back
3. If done right it looks cool.
Anyone else out there interested?
04-17-2006, 03:45 PM
#9
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
Originally Posted by RD in SD
Of course you wouldn't want to block the back window. The custom ones that I have seen have a thick plexiglass window in them. Reminded me of a Pantera, Lambo or Ferrari with the small window just behind the driver.
The one I saw looked very cool and was practicle too. As long as it was removable I bet you would get some takers. I would buy one for three reasons.
1. Keeps it quiet inside
2. Keeps stuff in the back in the back
3. If done right it looks cool.
Anyone else out there interested?
The one I saw looked very cool and was practicle too. As long as it was removable I bet you would get some takers. I would buy one for three reasons.
1. Keeps it quiet inside
2. Keeps stuff in the back in the back
3. If done right it looks cool.
Anyone else out there interested?
Thanks,
Jim
05-01-2006, 09:58 PM
#11
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
Originally Posted by IceDigger
Do the cup holders hold a large slurpee?
Give it a shot, we offer a full money back guarantee on all of our products.
06-06-2006, 11:13 PM
#13
Advanced
Member Since: Aug 2003
Location: Caddo Mills TX
Posts: 92
Likes: 0
Received 0 Likes
on
0 Posts
Rd in SD. I think it's a great idea. There is a tremendous amount of noise that comes from the rear of the car. If it was a tight fit and looked original-custom fit, I would get on.
06-23-2006, 02:56 AM
#14
Racer
Member Since: Apr 2006
Location: College Park Maryland
Posts: 371
Likes: 0
Received 0 Likes
on
0 Posts
I think your setup looks awesome, but I wish that you could still fit the Targa Top without having to remove the partition. Any plans on making this a possibility?
06-23-2006, 09:14 AM
#15
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
Originally Posted by Mystical Musician
I think your setup looks awesome, but I wish that you could still fit the Targa Top without having to remove the partition. Any plans on making this a possibility?
Really finished off the back great.
No plans to change the design at this point, still trying to catch up on orders for this version
Give it a try and see what you think. Really easy to lay the partition down if you need too.
We offer a full money back guarantee on all our products.
Jim
07-10-2006, 07:42 PM
#17
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
Originally Posted by MYVetteBy25
Will the partition interfere with the stock cargo cover?
Give it a try. We offer a full money back guarantee on all our products.
Jim
07-16-2006, 09:56 AM
#19
Supporting Vendor
Thread Starter
Member Since: Jun 2005
Location: Marietta Georgia
Posts: 20,644
Received 315 Likes
on
288 Posts
St. Jude Donor '06-'07, '13, '15
Originally Posted by soontobe
do you lose any seat back movement?
Gerry
Gerry
The partition and tray go behind the seats in the cargo area.
Thanks,
Jim
07-16-2006, 10:31 AM
#20
Melting Slicks
Originally Posted by Mystical Musician
I think your setup looks awesome, but I wish that you could still fit the Targa Top without having to remove the partition. Any plans on making this a possibility?
