WTB Clockspring & Harness 07 up
#1
Melting Slicks
Thread Starter
WTB Clockspring & Harness 07 up
I am doing a SWC conversion on my '06 MN6 coupe. I already have the '08 Nav installed, I just acquired a new '11 Steering wheel with the switches. I need the Clockspring and harness. GM part #s 191 53 097, and 191 53 095. Anyone parting out a 07 up coupe, vert, zo6? Vendors?
#2
Former Vendor
I'd be happy to help you with new if you decide to go that route. Please feel free to visit our website, or email me at kevin@partstaxi.com for assistance.
Thanks
Kevin
www.PartsTaxi.com
Thanks
Kevin
www.PartsTaxi.com
#3
Premium Supporting Vendor
Should you be interested in or would consider new, please send me an email, gene@gmpartshouse.com or call 484-949-2099, as I’d appreciate the opportunity to earn your business.
__________________
Phone: 484-334-8833
Owner of CULTRAG Performance
Shop Our Factory GM Parts Website
Phone: 484-334-8833
Owner of CULTRAG Performance
Shop Our Factory GM Parts Website
#5
Melting Slicks
Thread Starter
#6
Burning Brakes
A quick question. Isn't the harness the same with or without the accessory controls? Just for radio controls or does that include the bluetooth part? Or should we use the 2009 harness? It seems the clockspring is not any different though.
Last edited by Thompyt; 05-19-2011 at 08:34 PM.
#7
Melting Slicks
Thread Starter
There are additional wires in the 07 up harness's for the swc and bluetooth. I am only using the SWC wires, three additional. 2 for the radio, 1 for the lighted switches. I have recieved the pins needed for the radio connector, just waiting for the wheel, clockspring, and new harness. A small amout of additional wiring is required, but it is minimal.
#8
[ QUOTE=kevakasper;1577661655]There are additional wires in the 07 up harness's for the swc and bluetooth. I am only using the SWC wires, three additional. 2 for the radio, 1 for the lighted switches. I have recieved the pins needed for the radio connector, just waiting for the wheel, clockspring, and new harness. A small amout of additional wiring is required, but it is minimal.[/QUOTE]
I'mlooking to do the same work to my Corvette I have A 2008 Chevy Corvette base model with no audio functions on my steering wheel and regular radio I change to the 2008 z06 navigation and a 2010 to 2012 new steering wheel with the audio functions and Bluetooth functions I also bought the pins needed for the terminal for the back of the radio and I'm required to buy a new clock spring I'm not sure about that but taking off my old steering wheel I busted my clock spring I was just wondering how I would do the connections from the clockspring to the radio I'm very confused I don't know if you can help me out but I would really appreciate it thank you very much
I'mlooking to do the same work to my Corvette I have A 2008 Chevy Corvette base model with no audio functions on my steering wheel and regular radio I change to the 2008 z06 navigation and a 2010 to 2012 new steering wheel with the audio functions and Bluetooth functions I also bought the pins needed for the terminal for the back of the radio and I'm required to buy a new clock spring I'm not sure about that but taking off my old steering wheel I busted my clock spring I was just wondering how I would do the connections from the clockspring to the radio I'm very confused I don't know if you can help me out but I would really appreciate it thank you very much
#9
Racer
[ QUOTE=kevakasper;1577661655]There are additional wires in the 07 up harness's for the swc and bluetooth. I am only using the SWC wires, three additional. 2 for the radio, 1 for the lighted switches. I have recieved the pins needed for the radio connector, just waiting for the wheel, clockspring, and new harness. A small amout of additional wiring is required, but it is minimal.
I'mlooking to do the same work to my Corvette I have A 2008 Chevy Corvette base model with no audio functions on my steering wheel and regular radio I change to the 2008 z06 navigation and a 2010 to 2012 new steering wheel with the audio functions and Bluetooth functions I also bought the pins needed for the terminal for the back of the radio and I'm required to buy a new clock spring I'm not sure about that but taking off my old steering wheel I busted my clock spring I was just wondering how I would do the connections from the clockspring to the radio I'm very confused I don't know if you can help me out but I would really appreciate it thank you very much[/QUOTE]
I have a clock spring that has a yellow and gray plug that would go to the harness and a white clip I believe for the air bag and four other wires, red, white, brown and purple. There is a number printed on the front 26129609 89Q0727Y
#10
Melting Slicks
Thread Starter
I'mlooking to do the same work to my Corvette I have A 2008 Chevy Corvette base model with no audio functions on my steering wheel and regular radio I change to the 2008 z06 navigation and a 2010 to 2012 new steering wheel with the audio functions and Bluetooth functions I also bought the pins needed for the terminal for the back of the radio and I'm required to buy a new clock spring I'm not sure about that but taking off my old steering wheel I busted my clock spring I was just wondering how I would do the connections from the clockspring to the radio I'm very confused I don't know if you can help me out but I would really appreciate it thank you very much
It has been awhile since I did this conversion, but It was my understanding that the 2007 up steering columns had the extra wires for the radio controls, yours should. Search the threads for my conversion. I had the pin outs and proper connector part numbers listed. Your steering column harness should also have the necessary wires in it. I would start with the radio plug and check to see if you have the additional two wires in it first.
#11
Should you be interested in or would consider new, please send me an email, gene@gmpartshouse.com or call 484-949-2099, as I’d appreciate the opportunity to earn your business.
I have a 2008 chevy corvette my car didn't come with audio or* bluetooth functions or nav so I bought an 08 nav and a 2010 new steering wheel with those functions I also had to buy a clock spring (19153097)*with acc Connections I need to know which harness will plug into my clock spring and nav and will get my functions to work the connection to my harness that I have in my car doesn't match up with my new clock spring because it has more wires now I guess for all the new wires the terminals ate different but everything else matches up which harness do I need (19153095 or 19153096) and will it match up with the new style Grey terminal on the clock spring *