Pioneer Rocktober Specials on x930bt and Z130bt! C6 PACKAGES
#1
Former Vendor
Thread Starter
Pioneer Rocktober Specials on x930bt and Z130bt! C6 PACKAGES
WICKED DEALS ON PIONEER!
WE HAVE COMPLETE INSTALL READY PACKAGES!
PLUS!!!
$100.00 MAIL IN REBATES FROM PIONEER TILL END OF ROCKTOBER AS WE LIKE TO CALL IT!
WE HAVE COMPLETE INSTALL READY PACKAGES!
PLUS!!!
$100.00 MAIL IN REBATES FROM PIONEER TILL END OF ROCKTOBER AS WE LIKE TO CALL IT!
PACKAGES INCLUDES
RADIO
HARNESS(PAC OR METRA)
GM ANTENNA ADAPTER
METRA DASH KIT
RADIO
HARNESS(PAC OR METRA)
GM ANTENNA ADAPTER
METRA DASH KIT
PRICES AND REBATES
GOOD TILL END OF OCTOBER!
GOOD TILL END OF OCTOBER!
FOR FORUM MEMBERS ONLY
IF YOU NOTE DURING CHECKOUT
WE WILL PREWIRE THIS PACKAGE FOR YOU
YOU WILL NEED TO WIRE ONE THING FOR CARS WITH NO STEERING WHEEL CONTROLS
3 WIRES IF YOU HAVE THEM. WIRES WILL BE MARKED FOR YOU TO COMPLETE
IF YOU NOTE DURING CHECKOUT
WE WILL PREWIRE THIS PACKAGE FOR YOU
YOU WILL NEED TO WIRE ONE THING FOR CARS WITH NO STEERING WHEEL CONTROLS
3 WIRES IF YOU HAVE THEM. WIRES WILL BE MARKED FOR YOU TO COMPLETE
IF YOU DO NOT ASK WE DO NOT PREWIRE THEM.
THIS IS JUST AN ADDED BONUS FOR MEMBERS!
THIS IS JUST AN ADDED BONUS FOR MEMBERS!
#4
how do the z130s work in these cars? Especially when keeping the oem Bose amps/speakers? I had one for a couple weeks in my 03 cobra with aftermarket hids, when I turned the lights on the audio would cut out, a couple weird problems like that. I did some reading around and it seemed cars with aftermarket hids were doing that with those decks so I'm guessing I shouldn't have that problem now I've had an f90bt in it for a couple years now and I've loved it for the most part. The only problem is for some reason most stereo shops I've walked into try to push the Kenwoods, and I don't really care for Kenwood's iPod interface, which is most of the reason I'm considering putting a deck in my car, I rarely use gps/nav as it's a weekend car.
#5
Former Vendor
Thread Starter
how do the z130s work in these cars? Especially when keeping the oem Bose amps/speakers? I had one for a couple weeks in my 03 cobra with aftermarket hids, when I turned the lights on the audio would cut out, a couple weird problems like that. I did some reading around and it seemed cars with aftermarket hids were doing that with those decks so I'm guessing I shouldn't have that problem now I've had an f90bt in it for a couple years now and I've loved it for the most part. The only problem is for some reason most stereo shops I've walked into try to push the Kenwoods, and I don't really care for Kenwood's iPod interface, which is most of the reason I'm considering putting a deck in my car, I rarely use gps/nav as it's a weekend car.
We have sent out I would say at least 150 z130 units this summer alone. Not any issues form anyone with concerns like your talking about.
For the diming wire on a C6 we tap into the gray wire with black strip ont he active handling button anyways so its not connected to the harness used
this is the only wire I cna not prewire for you if you have no steering wheel controls
You are correct the ipod features on the Pioneer are better than the Kenwood. We sell alot of Kenwood too for the Garmin NAV
What year is your car
onstar ?
bose?
this is all I need ot know to get you the correct setup
Let me know any questions
Dennis
#6
I have an '06 z06, with Bose, no onstar, no steering wheel controls or anything. I would be curious also, while you're wiring stuff up can you do the bypass wiring as well? The f90bt and the z120 I had got the bypass by moving a wire in the harness to another pin on the plug and then grounding it.
#7
Former Vendor
Thread Starter
I have an '06 z06, with Bose, no onstar, no steering wheel controls or anything. I would be curious also, while you're wiring stuff up can you do the bypass wiring as well? The f90bt and the z120 I had got the bypass by moving a wire in the harness to another pin on the plug and then grounding it.
simple install
You would have one wire to connect and one connector to plug in(see pic)
the bypass i can do for you too. You would just need to make one final crimp conneciton is all on the gorund wire. I just can not fully complete it due to liability reasons. Both wires would be easily marked for you.
Here is a pic of the same harness you will need for you car fully prewired to a Kenwood 9980hd
this is as easy as it gets
#14
Former Vendor
Thread Starter