WTB: Z51 or Z06 FRONT Sway Bar
01-19-2013, 11:29 PM
#1
Tech Contributor
Thread Starter
WTB: Z51 or Z06 FRONT Sway Bar
Looking for a used Z06 or Z51 FRONT sway bar - IN GOOD CONDITION. (I'm pretty sure they are the same size.)
I don't need anything else.
I plan on powdercoating it.
Send me a PM or post here. THANKS!
Oh yes, this is for a 2010 C6.
.
.
I don't need anything else.
I plan on powdercoating it.
Send me a PM or post here. THANKS!
Oh yes, this is for a 2010 C6.
.
.
Last edited by ncvette_1FUNRIDE; 01-19-2013 at 11:41 PM.
01-21-2013, 04:12 PM
#7
Tech Contributor
Thread Starter
What year is it off of? I suppose the front sway bars are the same for all C6's, but I'm not sure.
I have a 2010.
And to be sure, this is not a regular sway bar but a thicker Z51/Z06 FRONT sway bar?
If it is a Z51 FRONT sway bar in good condition, I will probably take it.
I have a 2010.
And to be sure, this is not a regular sway bar but a thicker Z51/Z06 FRONT sway bar?
If it is a Z51 FRONT sway bar in good condition, I will probably take it.
01-21-2013, 04:33 PM
#8
Premium Supporting Vendor
Member Since: Nov 2003
Location: www.EXOTICVETTE.com - FL Cruise-In VI, VII, & VIII
Posts: 6,853
Received 120 Likes
on
91 Posts
Cruise-In V Veteran
St. Jude's Donor '05-'06-'07-'08-'09-'10-'11-'12-'13-'14-'15-'16
Z51 is thicker than base. Z06 thicker than that. ZR1 thicker still. Also be careful going with bigger diameter front and back being stock base diameter. May make the rear sway cause the car to be less safe if the front tries pulling the inner wheel off the road. 
01-21-2013, 04:59 PM
#9
Tech Contributor
Thread Starter
I know the Z06 rear is bigger than a Z51 rear sway bar. (I already have a Z06 rear sway bar)
I have done a ZR1 conversion and have big brakes, tires, and wheels.
Last edited by ncvette_1FUNRIDE; 01-21-2013 at 05:02 PM.