0Quik Z06

Hey guys, I have a few sets of these that we need to move. They are real carbon fiber and they are a 2 inch flare (no Z06 scoop) as mentioned, in stock and ready to ship. You can use Z06 wheels to fill these in or spacers for the cheap route. Doing these few sets we have for $840 shipped (that's for the pair) retail on these is $1299 + shipping. A few pics of customers cars.

poleposition

What other hardware is needed to install these?

0Quik Z06

You just reuse your oem hardware.

3whit

Wouldn't there be a gap on the inner fender liner ,how is that dealt with , Thanks for info ...

0Quik Z06

If you look at the top pic there is a lip on the inner side of the flare, that attaches to the fender liner (for stock ride height) for lowered that lip needs to be cut and what my C5 guys do is leave the gap or make there own fender extensions with some plastic material, since its just a simple piece.

On a customers C5..

BoosTTed C6

Will a Z06 inner fender liner work for the rear and if so, what is the normal cost? I like the fender without the scoop. Much stealthier to the untrained eye.

0Quik Z06

That's a good question, and I would think it would since these are 2 inches wider than the base C6. But again the cheaper alternative would be making your own, a simple piece of plastic from Home Depot and some rivets would do the job.

UmX

I dont think the back have the inner fender liner gap like the front.. i looked at my buddys z upclose and it didnt look like it..

0Quik Z06

*edit* damn auto correct!

Yea not sure to be honest. Thanks

UmX

fronts def need the gap fillers, as for the back all i saw when i looked was the mud flaps. I felt in the wheel well and it bolted up in the same spots..

ydeer

Will the fenders fit a 2006 convertible ?

realcanuk

Coupe rear fenders will not fit a convertible.

greerracing

Do you offer a non carbon version.

C U IN REARVEIW

How is the fitment? Need alot of prep work to fit right?

0Quik Z06

Yes but out of stock at the moment, those are $650 shipped.


Fitment is really good. The carbon version should only need minimal prep before paint.

greerracing

Does the gas door just get reused and who manufacturers these.

not08crmanymore

When you get wider rear fender you need wider rear fender components underneath,The black plastic stuff that goes in the wheel well.The LINER.op,WHY NO BRAKE COOLING DUCTS IN THERE?I'm seriously considering getting carbon fiber rear panels for my GS.Hood too.

CMEGONE

Let us know when you have some more of the non carbon version available. Thanks.

0Quik Z06

Yes you reuse the gas door. And Extreme Dimensions makes all my parts.

Why no scoop? Well we wanted to make a 2 inch flared fender and NOT copy the Z06. Some guys want a flared fender but don't want the side scoop.

Jambolito

I would also like to know when the non-carbon ones are back in stock.