FS: E85 prc 285cc high compression heads race cam
#1
Ls7 E85 prc 285cc high compression heads race cam
tsp prc 285cc heads angle milled and redone by wcch ..new PAC 1207x valve Springs
new valve seals
competition valve job
Heads are angle milled 0-120 bringing it to around 13:8:1 in a 52 thou gasket
Heads were redone complete by wcch around this time last year only ran them for a few hundred miles heads are practically fresh springs have zero miles and seals as well I I payed over 3k for the heads and another 1200 to have wcch redo them they also have new all pro valve guides ..
again heads have have a few hundred miles and are ready to go nothing wrong with them !!
I made 640 wheel with these heads and cam ..
now on to the cam .. 254/260 on a 112 lsa with a 667/662"
yes it's huge top end was crazy on this set up ..
i had this top end on my 08 z06 with stock short block ls7
price is 2400 for heads and cam shipped I have receipts for the work and the original build on heads ..
text preferred (626)826-8611 for details
new valve seals
competition valve job
Heads are angle milled 0-120 bringing it to around 13:8:1 in a 52 thou gasket
Heads were redone complete by wcch around this time last year only ran them for a few hundred miles heads are practically fresh springs have zero miles and seals as well I I payed over 3k for the heads and another 1200 to have wcch redo them they also have new all pro valve guides ..
again heads have have a few hundred miles and are ready to go nothing wrong with them !!
I made 640 wheel with these heads and cam ..
now on to the cam .. 254/260 on a 112 lsa with a 667/662"
yes it's huge top end was crazy on this set up ..
i had this top end on my 08 z06 with stock short block ls7
price is 2400 for heads and cam shipped I have receipts for the work and the original build on heads ..
text preferred (626)826-8611 for details
Last edited by 1evilzee; 08-17-2017 at 09:48 PM. Reason: Price
#2
Bumppp
tsp prc 285cc heads angle milled and redone by wcch ..new PAC 1207x valve Springs
new valve seals
competition valve job
Heads are angle milled 0-120 bringing it to around 13:8:1 in a 52 thou gasket
Heads were redone complete by wcch around this time last year only ran them for a few hundred miles heads are practically fresh springs have zero miles and seals as well I I payed over 3k for the heads and another 1200 to have wcch redo them they also have new all pro valve guides ..
again heads have have a few hundred miles and are ready to go nothing wrong with them !!
I made 640 wheel with these heads and cam ..
now on to the cam .. 254/260 on a 112 lsa with a 667/662"
yes it's huge top end was crazy on this set up ..
i had this top end on my 08 z06 with stock short block ls7
price is 3k for heads and cam shipped I have receipts for the work and the original build on heads ..
text preferred (626)826-8611 for details
new valve seals
competition valve job
Heads are angle milled 0-120 bringing it to around 13:8:1 in a 52 thou gasket
Heads were redone complete by wcch around this time last year only ran them for a few hundred miles heads are practically fresh springs have zero miles and seals as well I I payed over 3k for the heads and another 1200 to have wcch redo them they also have new all pro valve guides ..
again heads have have a few hundred miles and are ready to go nothing wrong with them !!
I made 640 wheel with these heads and cam ..
now on to the cam .. 254/260 on a 112 lsa with a 667/662"
yes it's huge top end was crazy on this set up ..
i had this top end on my 08 z06 with stock short block ls7
price is 3k for heads and cam shipped I have receipts for the work and the original build on heads ..
text preferred (626)826-8611 for details