FS: LS7 Engine For sale - Near Complete Drop Out
08-29-2017, 10:31 PM
#1
Heel & Toe
Thread Starter
Member Since: Nov 2012
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
LS7 Engine For sale - Near Complete Drop Out
SOLD!
Asking 8500USD for what you see below, I am located in Manassas Va. Can ship if needed, have a crate for the engine.
LS7 Engine from 2008 Corvette Z06 for sale. 12K Miles, all cylinders have compression within 4lbs of one another.
This was a take out (drop out) engine from a wrecked Z06. A tree fell on the car and crushed the cabin, which is why it was totaled. Engine was test ran prior to removal, and worked fine. I have had this engine approx 3 years, I was using it for mock up on a project car, but decided to go with a purpose built race motor instead of rebuilding this motor. Motor has been well treated and protected during the build.
I am selling motor with nearly all accessories needed to run, making this pretty close to a true drop in. I have had to pirate some parts for my own build, and I have those missing items called out below.
What you get:
2008 LS7 Engine, stock, 12K Miles
All Brackets and engine mounts (Less A/C compressor Bracket)
All Covers (Valley, Timing, Valve covers, oil pan, etc)
Alternator
Water pump (needs outlet barb replaced)
Coil Brackets
Starter Motor
Intake Manifold
Exhaust - Stock Ls7 Manifolds and Cats
Computer
Harness (Some Plugs have been clipped)
Fuse Box
Beauty Covers (Red/Plastic)
Dry Sump Tank and oil Lines ('08 version)
LS7 Clutch - 12K miles, looks good.
LS7 Flywheel (removed, it and the pilot bearing have been removed and will need to be reinstalled, pilot bearing provided)
Stock Balancer/Damper
Bolts required for parts which have been pulled off, but are included with sale.
Parts That you will need to get up and running:
Power Steering pump
Injectors
Fuel Rail
Water Pump - One needing work is provided
Throttle Body
Z06 Gas Pedal
Wiring harness - or plugs to replace the ones I clipped off for my build
Coils & Coil Harness
Plug Wires
AC Compressor
AC Compressor Bracket
A/C Belt Tensioner
I've also linked a drop box video of the engine running prior to removal from the vette.
Video of Engine running prior to removal:
https://www.dropbox.com/s/wqb9nrsncr...4_001.3gp?dl=0
I've attached the best photo I have of the engine, its not good, but we just pulled the engine at the paint shop, and I havent had time to go grab it.
Asking 8500USD for what you see below, I am located in Manassas Va. Can ship if needed, have a crate for the engine.
LS7 Engine from 2008 Corvette Z06 for sale. 12K Miles, all cylinders have compression within 4lbs of one another.
This was a take out (drop out) engine from a wrecked Z06. A tree fell on the car and crushed the cabin, which is why it was totaled. Engine was test ran prior to removal, and worked fine. I have had this engine approx 3 years, I was using it for mock up on a project car, but decided to go with a purpose built race motor instead of rebuilding this motor. Motor has been well treated and protected during the build.
I am selling motor with nearly all accessories needed to run, making this pretty close to a true drop in. I have had to pirate some parts for my own build, and I have those missing items called out below.
What you get:
2008 LS7 Engine, stock, 12K Miles
All Brackets and engine mounts (Less A/C compressor Bracket)
All Covers (Valley, Timing, Valve covers, oil pan, etc)
Alternator
Water pump (needs outlet barb replaced)
Coil Brackets
Starter Motor
Intake Manifold
Exhaust - Stock Ls7 Manifolds and Cats
Computer
Harness (Some Plugs have been clipped)
Fuse Box
Beauty Covers (Red/Plastic)
Dry Sump Tank and oil Lines ('08 version)
LS7 Clutch - 12K miles, looks good.
LS7 Flywheel (removed, it and the pilot bearing have been removed and will need to be reinstalled, pilot bearing provided)
Stock Balancer/Damper
Bolts required for parts which have been pulled off, but are included with sale.
Parts That you will need to get up and running:
Power Steering pump
Injectors
Fuel Rail
Water Pump - One needing work is provided
Throttle Body
Z06 Gas Pedal
Wiring harness - or plugs to replace the ones I clipped off for my build
Coils & Coil Harness
Plug Wires
AC Compressor
AC Compressor Bracket
A/C Belt Tensioner
I've also linked a drop box video of the engine running prior to removal from the vette.
Video of Engine running prior to removal:
https://www.dropbox.com/s/wqb9nrsncr...4_001.3gp?dl=0
I've attached the best photo I have of the engine, its not good, but we just pulled the engine at the paint shop, and I havent had time to go grab it.
Last edited by Hockeydude84; 11-11-2017 at 02:07 PM. Reason: Sold
11-07-2017, 01:38 PM
#5
One suggestion, you are really limiting yourself by offering this engine only in the C6 section. There are many C3 owners that want to swap to an LS. You might get some bites if you place this in the C3 sections.
