mayracn

TRINIC5

Just my 2 cent, that is not the wrong radiator, that is a 3 core radiator that will work plenty better than the stock and the core is a little lower for the intake outlet to stay lower to avoid touching the hood, it will work very well if the right installer is doing the job, also the radiator cover will cover the lower cores tank.

mayracn

duhveed

mayracn

duhveed

LeftLane Z06

yup...zr1 has another coolant nipple on the lower driver side of the radiator.

mayracn

mayracn

Drajav1993

C6 CORVETTE
RADIATOR ONLY
Model: 1139105A (One Cooler)

This Direct Fit® radiator features two rows of 1" tubes, which doubles the cooling capacity of a factory single row. Our exclusive "press formed" end tanks are hand tig welded by expert craftsman, eliminating the factory plastic tanks. This radiator includes the correct factory type "quick connect" fittings for the oil connections. Application : Use with all Z06 & C6 Automatic, LS3 with Dry Sump

NOTE: Excludes 2012 spl Z07

Model: 1139105B (Both Coolers)

This Direct Fit® radiator features two rows of 1" tubes, which doubles the cooling capacity of a factory single row. Our exclusive "press formed" end tanks are hand tig welded by expert craftsman, eliminating the factory plastic tanks. This heavy duty radiator features both an EOC (left side) and TOC (right side). Application : This is a true Direct Fit® for 2005 & 2009 Z51 option cars. (2007-09 wet sump motor used 1139105B, All Dry Sump Cars use model: 1139105A)

Model: 1139105M (No Coolers)

This Direct Fit® radiator features two rows of 1" tubes, which doubles the cooling capacity of a factory single row. Our exclusive "press formed" end tanks are hand tig welded by expert craftsman, eliminating the factory plastic tanks.

Application: Use with Non-Z51,base cars with manual transmission only.

Model: 1139105E (EOC Only)

This Direct Fit® radiator features two rows of 1" tubes, which doubles the cooling capacity of a factory single row. Our exclusive "press formed" end tanks are hand tig welded by expert craftsman, eliminating the factory plastic tanks. This model features a high performance 7 plate aluminum engine oil cooler for those wanting to upgrade to engine oil cooling. Oil ports are 3/4-16 SAE which are identical to the factory GM radiator. You can use the factory GM oil line assembly (quick connection fttings required) or install the #10AN fittings and use SS hose assemblies. Application: No factory option

Model: 1139109Z (ZR1)

Our new radiator for 2009-2013 ZR1 option Corvettes. This radiator is also used on 2012 Z06 with special Z07 option.

RADIATOR & FAN COMBINATIONS
Model: 4139105A (TOC Only)

This Direct Fit® radiator features two rows of 1" tubes, which doubles the cooling capacity of a factory single row. Our exclusive "press formed" end tanks are hand tig welded by expert craftsman, eliminating the factory plastic tanks. This radiator includes the correct factory type "quick connect" fittings for the transmission oil connections. All Z06 & C6 Automatic NOTE: Excludes 2012 spl Z07

Model: 4139105B (Both Coolers)

This Direct Fit® radiator features two rows of 1" tubes, which doubles the cooling capacity of a factory single row. Our exclusive "press formed" end tanks are hand tig welded by expert craftsman, eliminating the factory plastic tanks. This heavy duty radiator features both an EOC (left side) and TOC (right side). This is a true Direct Fit® for 2005 - 2009 Z51 option cars. 2007-09 Wet sump motors (All Dry Sump Cars use model: 4139105A)

Model: 4139105M (No Coolers)

This Direct Fit® radiator features two rows of 1" tubes, which doubles the cooling capacity of a factory single row. Our exclusive "press formed" end tanks are hand tig welded by expert craftsman, eliminating the factory plastic tanks. Use with Non-Z51,base cars with manual transmission only.

Model: 4139105E (EOC Only)

This Direct Fit® radiator features two rows of 1" tubes, which doubles the cooling capacity of a factory single row. Our exclusive "press formed" end tanks are hand tig welded by expert craftsman, eliminating the factory plastic tanks. This model features a high performance 7 plate aluminum engine oil cooler for those wanting to upgrade to engine oil cooling. Oil ports are 3/4-16 SAE which are identical to the factory GM radiator. You can use the factory GM oil line assembly (quick connection fttings required) or install the #10AN fittings (included) and use SS hose assemblies.



See Spal Fan Category for Model: SP463

Spals dual fan package boosts air flow up 40% from stock. This fan package only fits our Direct Fit® radiators. Note: Factory wiring will need to be cut and spliced in order for the factory ECM to operate the fans.




Title

$649.99 USD
Qty:
1

FNBADAZ06

PM sent

Turbo2L

Do you still have this?

mayracn