FS: Penske Coil Over Shocks For C6 Corvette - Double Adjustable
#1
Former Vendor
Thread Starter
Penske Coil Over Shocks For C6 Corvette - Double Adjustable
SOLD
The 8300 Series double adjustable shock absorber provides more adjustability options and features to the serious racer. The double adjustable, coilover damper is suitable for a variety of applications. The rebound adjuster features 25 sweeps of bleed adjustment in the shaft. The compression adjuster features 20 clicks of linear-stepped adjustment.
This is accomplished by a parabolic needle valve that adjusts a fluid bypass past a standard shim stack. Coarse ACME thread body for ease of adjustment 2.25" or 2.50" spring hardware Extended lengths range from 10.0" to 24.0" Banjo swivel head hose available with remote version
The 8300 Series double adjustable shock absorber provides more adjustability options and features to the serious racer. The double adjustable, coilover damper is suitable for a variety of applications. The rebound adjuster features 25 sweeps of bleed adjustment in the shaft. The compression adjuster features 20 clicks of linear-stepped adjustment.
This is accomplished by a parabolic needle valve that adjusts a fluid bypass past a standard shim stack. Coarse ACME thread body for ease of adjustment 2.25" or 2.50" spring hardware Extended lengths range from 10.0" to 24.0" Banjo swivel head hose available with remote version
- Just removed from our shop race car (now has a different chassis)
- Used less than 100 miles (only half mile racing for one season)
- Penske dual adjust shocks with Hyperco springs
- Sold AS IS and AS SHOWN in photos (reservoir mounts included but screws are missing)
- Retail $5000 package
- Front shocks are Series 8300 (PS-83C6F) with Hyperco 600-Pound Springs (HYP188A0600)
- Rear Shocks are Series 8300 (PS-83C6R) with Hyperco 400-Pound Springs (HYP188A0400)
Last edited by Vengeance Racing; 01-17-2019 at 06:21 PM.
#2
Instructor
One can wish...
#3
Burning Brakes
Those spring rates don't seem that aggressive for a road race application.... what is the application for these? What year were they build and last rebuilt? Miles on them approx?
#4
Former Vendor
Thread Starter
Drag racing and/or half mile racing only. No street use. Less than 100 miles for sure. On and off trailer and half mile pulls.
Removed about 9 months ago and built in Jan 2017. They were not refreshed as I stated in original post. They are nearly new.
We had FATMAN (shop car) rebuilt over the last nine months. New chassis completely and all new set up...........
BEFORE on mostly stock suspension
New Chassis
Removed about 9 months ago and built in Jan 2017. They were not refreshed as I stated in original post. They are nearly new.
We had FATMAN (shop car) rebuilt over the last nine months. New chassis completely and all new set up...........
BEFORE on mostly stock suspension
New Chassis
#6
Former Vendor
Thread Starter