FS: LOTS of ZR1 parts for sale - to be updated continuously
#1
LOTS of ZR1 parts for sale - to be updated continuously
Hello. I bought a ZR1 a few months ago and had Lingenfelter do some major mods to it. I have to start off by saying that my knowledge of car parts is a bit limited, so please bear with me if I need guidance on any questions. I will explain the origin of the parts the best I can with the info I have as the parts were on the car when I bought it. Most are stock parts, but there's some good stuff! I got all the old parts shipped back to me. I am going to keep this thread updated as I go through about 13 boxes of parts. Of course pictures are to follow as I figure it out with a photobucket account or something. But I wanted to get the list started with pricing and what I know about the parts as I bought the car used, Thanks for taking the time to look everyone! Prices are without shipping until I can figure out the best way to ship the items for the best price or if someone wants to pay to ship immediately. Take it one part at a time. Take Paypal only and ship only to lower 48. All the parts came off a car with 7000 miles. Everything is best offer, so PM me or hit me up at hisjakeness1120@gmail.com. Parts are located in the Pensacola area of Florida. Thanks again!
Edit - I have tons of small parts and bolts that I don't have a clue what they all go to. Best to message me about something you want, and we can either facetime somehow to make sure everything gets put with the stuff it goes with or I can lay out what you want and you can tell me what all goes with that item so you get it all. I think that's better than taking pictures of bags of bolts.
1. True LS9 Heads ported and polished by Texas Speed with their imprint and serial number on them and all the usual LS9 goodies. I talked with them and they said they can't even keep any in stock and will only address these heads if they are brought to them. Here are the numbers I got directly from Texas Speed for a 6.2 LS3. The heads will fit on a 6.0 or a 6.2 according to Texas Speed. $1760 for both.
PRC LS3 Intake PRC LS3 Exhaust
cfm cfm
.200 154 115
.300 223 170
.400 282 198
.500 324 211
.600 351 228
.650 358 232
2. LS9 Engraved supercharger (stock) except it is powder coated black and has been ported and polished, The car ran great when it was installed and the only reason it was removed is because Lingenfelter said "36k warranty or supercharger, you choice." I chose the warranty as they literally tore the car down to the flywheel twice and did lots of other work, including boring, so I figured it was a no brainer. This is a true LS9 supercharger, not just one that "fits." I have attached pictures of the supercharger while it was installed. One picture has a few dots on the top but that's just where it started to sprinkle rain. SDPC and all the other sits have this listed at $8400. Selling at $5850. Here is a link showing the going price new. https://sdparts.com/i-24080942-chevr...iABEgJGRvD_BwE
3. Stock engine cover - has some scraping on the passengers side in the blue paint area. Can possibly be used as a core for a different on or be touched up on the paint. $50
4. Stock Mid-pipe - $125 -, SOLD! Pending me getting it packed and shipped.
5. Stock exhaust manifolds - $125
6. Catalytic converters - $225
7. Not ZR1 related - pair of Random Technologies cats brand new in the box - sold!
8. Jake Skull Intake - sorry, this is rare, so $250
9. Aftermarket intercooler. Need to find out the brand.
10. More to come, including power steering items and dry sump items. Need to see what all is in there.
11. open to trades if someone wants chrome wheels instead of the argent gray wheels. Can make a swap plus maybe an item on my end as one of the wheels has a blemish that only scraped some chrome off and isn't noticeable unless you look for the blemish. Just throwing that out there.
12. stock camshaft - $110
13. stock clutch plate that looks good along with the entire set up for the dual clutch - $250
14. several power steering and oiling lines and coolers - unsure of the value depending on what you might be looking for.
15. Chromoly pushrods stock
16. Stock flywheel
Edit - I have tons of small parts and bolts that I don't have a clue what they all go to. Best to message me about something you want, and we can either facetime somehow to make sure everything gets put with the stuff it goes with or I can lay out what you want and you can tell me what all goes with that item so you get it all. I think that's better than taking pictures of bags of bolts.
1. True LS9 Heads ported and polished by Texas Speed with their imprint and serial number on them and all the usual LS9 goodies. I talked with them and they said they can't even keep any in stock and will only address these heads if they are brought to them. Here are the numbers I got directly from Texas Speed for a 6.2 LS3. The heads will fit on a 6.0 or a 6.2 according to Texas Speed. $1760 for both.
PRC LS3 Intake PRC LS3 Exhaust
cfm cfm
.200 154 115
.300 223 170
.400 282 198
.500 324 211
.600 351 228
.650 358 232
2. LS9 Engraved supercharger (stock) except it is powder coated black and has been ported and polished, The car ran great when it was installed and the only reason it was removed is because Lingenfelter said "36k warranty or supercharger, you choice." I chose the warranty as they literally tore the car down to the flywheel twice and did lots of other work, including boring, so I figured it was a no brainer. This is a true LS9 supercharger, not just one that "fits." I have attached pictures of the supercharger while it was installed. One picture has a few dots on the top but that's just where it started to sprinkle rain. SDPC and all the other sits have this listed at $8400. Selling at $5850. Here is a link showing the going price new. https://sdparts.com/i-24080942-chevr...iABEgJGRvD_BwE
3. Stock engine cover - has some scraping on the passengers side in the blue paint area. Can possibly be used as a core for a different on or be touched up on the paint. $50
4. Stock Mid-pipe - $125 -, SOLD! Pending me getting it packed and shipped.
5. Stock exhaust manifolds - $125
6. Catalytic converters - $225
7. Not ZR1 related - pair of Random Technologies cats brand new in the box - sold!
8. Jake Skull Intake - sorry, this is rare, so $250
9. Aftermarket intercooler. Need to find out the brand.
10. More to come, including power steering items and dry sump items. Need to see what all is in there.
11. open to trades if someone wants chrome wheels instead of the argent gray wheels. Can make a swap plus maybe an item on my end as one of the wheels has a blemish that only scraped some chrome off and isn't noticeable unless you look for the blemish. Just throwing that out there.
12. stock camshaft - $110
13. stock clutch plate that looks good along with the entire set up for the dual clutch - $250
14. several power steering and oiling lines and coolers - unsure of the value depending on what you might be looking for.
15. Chromoly pushrods stock
16. Stock flywheel
Last edited by hisjakeness02; 05-24-2019 at 08:01 PM. Reason: add more items
#2
Please don't let my post count fool you. I have been a member since 2005 with a 2004 z06. My account was lost and I had to create a new one.
Last edited by hisjakeness02; 05-02-2019 at 06:01 PM. Reason: to clarify who i am
#5
Burning Brakes
What state are you shipping from?
#6
Racer
#8
Correct. Pensacola area, Gulf Breeze for anyone familiar with the area, but it's a small town, so I always say Pensacola area of Florida.
Willing to ship anything. For the mid-pipe, I found that I can wrap it up and take it to the bus station and they ship for cheap. Done it for a few exhaust parts in the past. But sure, willing to ship anything.
As for the bricks, sorry, not taking the supercharger apart unless it goes a long time with no one wanting it.
Car is a 2010 ZR1.
I hope that answered all the questions. Thanks!
Willing to ship anything. For the mid-pipe, I found that I can wrap it up and take it to the bus station and they ship for cheap. Done it for a few exhaust parts in the past. But sure, willing to ship anything.
As for the bricks, sorry, not taking the supercharger apart unless it goes a long time with no one wanting it.
Car is a 2010 ZR1.
I hope that answered all the questions. Thanks!
Last edited by hisjakeness02; 05-03-2019 at 01:11 PM. Reason: add year
#9
Getting lots of nibbles, but nothing caught! LOL! I am open to trades if you have something cool or something I might need.
Please let me know if I did not respond to your request.
Please let me know if I did not respond to your request.
Last edited by hisjakeness02; 05-04-2019 at 06:40 PM. Reason: make sure i got everyone what they wanted
#11
Instructor
Member Since: Apr 2005
Location: Charlotte North Carolina
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
#16
quickone, I will get it out asap and try to determine everything i can about it. Sorry for being late on some of this stuff, right after I posted I got a big, very important work project that just got extended to next Thursday. But I will try to get the info to you tomorrow night or Saturday morning. Thanks!
#18
Pro
Shipped so many big items this way for years, few people know about this or Fastenal for shipping.
#19
quickone, I will get it out asap and try to determine everything i can about it. Sorry for being late on some of this stuff, right after I posted I got a big, very important work project that just got extended to next Thursday. But I will try to get the info to you tomorrow night or Saturday morning. Thanks!