FS: C6 Greddy EVOlution stainless exhaust
#1
Advanced
Thread Starter
C6 Greddy EVOlution stainless exhaust
Hey Guys, I have a cat-back stainless exhaust available off my C6 Vette. It is about 6 months old and has about 1000 miles on it. I traded in my Vette so I removed all the add-ons I put on it. I did not like the factory Greedy tips because I thought it looked too much like a tuner car. I had this quad tip put on. It is not what I would call a "show quality" install of the tips. Unless you look close, it works and looks good. If you don't like the tips I am sure you can put your own on. It sounds really good. It does drone a bit more than stock but not to bad compared to some I have seen.
******SOLD****** $350 and you pay the shipping. ******SOLD******
It will ship in the factory box which is 65"x25"x13". Shipping weight is 65 lbs. You can get a quote yourself from UPS or PM or e-mail me for a quote. Ships from 81505
Pm or e-mail kyle@xlrindustries.com
Factory info:
The EVOlution GT, for the Z06 Chevrolet Corvette, combines the best of GReddy's 40 years of exhaust design expertise, in one unique system. Increased performance, refine exhaust note, and a substantial weight savings come through a creative layout with our distinctive dual EVO mufflers. Large 76mm (3") mandrel-bent piping is configured with a superior "X-pipe." It is then linked to a set of our compact, but highly-efficient, straight-through, mufflers and twin center-exit, 115mm (4.5") GReddy slash cut tips. To complete the look, a GReddy Carbonfiber Tip Finshier is included to accent the EVO GT exhaust. In dyno tests, the system gains the Z06, 27.2whp / 34.7ft-lb of performance, while producing just an 8-10 decibel increase in sound, (at idle and our test RPM = 3/4 redline, 5250). By eliminating the heavy OEM valve system and unnecessary tips, weight is reduced by 34% (-24.2lbs.) Fitment and installation is top notch and straight forward, with better-then OEM investment cast stainless-steel GReddy flanges. (There is no cutting or sloppy slip-on joints to figure out.) Like all GReddy EVOlution GT systems, they are all made from fully hand-welded, 304 stainless-steel and each exhaust carries a GReddy Limited Lifetime Warranty.
Features
******SOLD****** $350 and you pay the shipping. ******SOLD******
It will ship in the factory box which is 65"x25"x13". Shipping weight is 65 lbs. You can get a quote yourself from UPS or PM or e-mail me for a quote. Ships from 81505
Pm or e-mail kyle@xlrindustries.com
Factory info:
The EVOlution GT, for the Z06 Chevrolet Corvette, combines the best of GReddy's 40 years of exhaust design expertise, in one unique system. Increased performance, refine exhaust note, and a substantial weight savings come through a creative layout with our distinctive dual EVO mufflers. Large 76mm (3") mandrel-bent piping is configured with a superior "X-pipe." It is then linked to a set of our compact, but highly-efficient, straight-through, mufflers and twin center-exit, 115mm (4.5") GReddy slash cut tips. To complete the look, a GReddy Carbonfiber Tip Finshier is included to accent the EVO GT exhaust. In dyno tests, the system gains the Z06, 27.2whp / 34.7ft-lb of performance, while producing just an 8-10 decibel increase in sound, (at idle and our test RPM = 3/4 redline, 5250). By eliminating the heavy OEM valve system and unnecessary tips, weight is reduced by 34% (-24.2lbs.) Fitment and installation is top notch and straight forward, with better-then OEM investment cast stainless-steel GReddy flanges. (There is no cutting or sloppy slip-on joints to figure out.) Like all GReddy EVOlution GT systems, they are all made from fully hand-welded, 304 stainless-steel and each exhaust carries a GReddy Limited Lifetime Warranty.
Features
- Exhaust configuration: Dual muffler with X pipe and center exit tips and Carbon Finisher
- +27.2 HP, 34.7 Ft/Lb Gain
- Piping: 76 mm
- Tip(s): 2x 115 mm
- Weight: 47.2 lbs
- Chevrolet Corvette C6 Z06 2006-2013
Last edited by k.miller959; 05-23-2019 at 07:07 PM. Reason: SOLD