Breathless Vortex Air Rammer a proven winner again
#1
Melting Slicks
Thread Starter
Member Since: Mar 1999
Location: Fort Lauderdale Fl
Posts: 2,324
Likes: 0
Received 0 Likes
on
0 Posts
Breathless Vortex Air Rammer a proven winner again
Once again The Breathless Performance Products Vortex Air Rammer is proven again and again with flying colors both on the Track with 3/10 - 5/10 a second faster in the 1/4 mile at Beech Bend Speedway. The Dyno Pulls of 22 + Horsepower at Corvettes at Carlisle August 28th - 30th, 2009 and The Corvette Caravan 09
September 3rd - 5th, 2009 in Bowling Green, KY.
Welcome to the Breathless World of True State of the Art High Quality Ram Induction.
September 3rd - 5th, 2009 in Bowling Green, KY.
Welcome to the Breathless World of True State of the Art High Quality Ram Induction.
#2
Race Director
Once again The Breathless Performance Products Vortex Air Rammer is proven again and again with flying colors both on the Track with 3/10 - 5/10 a second faster in the 1/4 mile at Beech Bend Speedway. The Dyno Pulls of 22 + Horsepower at Corvettes at Carlisle August 28th - 30th, 2009 and The Corvette Caravan 09
September 3rd - 5th, 2009 in Bowling Green, KY.
Welcome to the Breathless World of True State of the Art High Quality Ram Induction.
September 3rd - 5th, 2009 in Bowling Green, KY.
Welcome to the Breathless World of True State of the Art High Quality Ram Induction.
#3
Burning Brakes
Once again The Breathless Performance Products Vortex Air Rammer is proven again and again with flying colors both on the Track with 3/10 - 5/10 a second faster in the 1/4 mile at Beech Bend Speedway. The Dyno Pulls of 22 + Horsepower at Corvettes at Carlisle August 28th - 30th, 2009 and The Corvette Caravan 09
September 3rd - 5th, 2009 in Bowling Green, KY.
Welcome to the Breathless World of True State of the Art High Quality Ram Induction.
September 3rd - 5th, 2009 in Bowling Green, KY.
Welcome to the Breathless World of True State of the Art High Quality Ram Induction.
#4
Melting Slicks
Thread Starter
Member Since: Mar 1999
Location: Fort Lauderdale Fl
Posts: 2,324
Likes: 0
Received 0 Likes
on
0 Posts
#7
I was smiling the whole way home after attending the Caravan at Bowling Green. I had my Killer Bee replaced with a Vortex Air Rammer. Mid range power increase is unbelievable!!! Installation was simple and the fit and finish is excellent. The 12 horsepower difference (no tuning) was the icing on the cake.
#8
Instructor
Member Since: Aug 2009
Location: Near Nashville TN
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Once again The Breathless Performance Products Vortex Air Rammer is proven again and again with flying colors both on the Track with 3/10 - 5/10 a second faster in the 1/4 mile at Beech Bend Speedway. The Dyno Pulls of 22 + Horsepower at Corvettes at Carlisle August 28th - 30th, 2009 and The Corvette Caravan 09
September 3rd - 5th, 2009 in Bowling Green, KY.
Welcome to the Breathless World of True State of the Art High Quality Ram Induction.
September 3rd - 5th, 2009 in Bowling Green, KY.
Welcome to the Breathless World of True State of the Art High Quality Ram Induction.
Here are the comparisons:
Beech Bend, BG, KY
R/T .186
60' 2.075.......before BPP V2- 1.974 (better track prep and driver errors)
330' 5.357
1/8 7.912......before BPP V2- 7.988 *(apples 2 apples-with the same 60', this would have been around .2 faster)
*MPH 98.26....before BPP V2- 93.02*over 5 mph gain! Ernie, Is this a result of the HP produced while up to speed?
1000' 10.087
1/4 11.917...........*see above gains-it's obvious that before BPP V2, I would have been well up into the 12's.
MPH 122.80
Please note that the "before BPP V2" runs were made on a cool spring evening and the BG runs were made in the middle of the day. The "before BPP V2" 1/8 mi. track also had much better track prep. BG is not known for prepping track well. Had fun and better final #s in spite of it. I know.....Still MUCH room for improvement. Especially the launch!
Thanks to all on the BPP Crew! Installation professional. The service has been great. Finish and fit wonderful. Ernie and Scott has always been there to talk to me and sacrifice their valuable time. This means a lot!
#9
Melting Slicks
Thread Starter
Member Since: Mar 1999
Location: Fort Lauderdale Fl
Posts: 2,324
Likes: 0
Received 0 Likes
on
0 Posts
Thank you, glad you love the system. Keep those fast times coming.
We are always here to help answer an questions anytime.
Billy dont forget we have the Miami Mile coming up, you ready for some real big top speed...lol
Ernie
We are always here to help answer an questions anytime.
Billy dont forget we have the Miami Mile coming up, you ready for some real big top speed...lol
Ernie
#10
Instructor
Member Since: Aug 2009
Location: Near Nashville TN
Posts: 118
Likes: 0
Received 0 Likes
on
0 Posts
Can't make any promises. I will if my work schedule allows, I will come.
#12
Melting Slicks
Thread Starter
Member Since: Mar 1999
Location: Fort Lauderdale Fl
Posts: 2,324
Likes: 0
Received 0 Likes
on
0 Posts
#13
Safety Car
Is this system available for the LS3 in my 2008?
Never mind, just found the product on their website. Looks good!
Never mind, just found the product on their website. Looks good!
Last edited by Shortimer; 10-07-2009 at 03:06 AM.
#14
Melting Slicks
Thread Starter
Member Since: Mar 1999
Location: Fort Lauderdale Fl
Posts: 2,324
Likes: 0
Received 0 Likes
on
0 Posts
Oh yes for the LS2,LS3, LS7 and soon LS9
Money back if you are not happy.
Ernie
www.BreathlessPerformance.com
Money back if you are not happy.
Ernie
www.BreathlessPerformance.com
#15
Melting Slicks
Ernie how do the intake systems for the LS3 respond if no tune is present. I dont want to tune the car due to warranty issues, but wouldnt mind a nice CAI. How are IATs around town etc?
which unit do I need for the LS3
which unit do I need for the LS3
#16
Melting Slicks
Thread Starter
Member Since: Mar 1999
Location: Fort Lauderdale Fl
Posts: 2,324
Likes: 0
Received 0 Likes
on
0 Posts
There are no issues without a tune, you can just make even more power with the tune and the box. IATs are usually down by about 20 to 40 degrees.
Give me a call for more info.
Ernie
954-925-7725
Give me a call for more info.
Ernie
954-925-7725