***RSD All Aluminum Radiator***
03-13-2013, 06:38 PM
#1
Le Mans Master
Thread Starter
***RSD All Aluminum Radiator***
Anyone who wants their LS engine to run cooler should put one of these in their car and replace the thermostat reprogram the fans to reep the benefits of a cooler engine.
We also build a 3" cut down radiator for the Vortech and Procharger supercharger guys. With the 3" cut down unit you can use a 4" air filter pipe to increase boost in your supercharger instead of the restrictive plastice dongle.
All of our radiators are available with either oil coolers or Transmission coolers.
Buy them here;http://www.racespecialtydesigns.com/home.php
Steve
Steve@RaceSpecialtyDesigns.com
We also build a 3" cut down radiator for the Vortech and Procharger supercharger guys. With the 3" cut down unit you can use a 4" air filter pipe to increase boost in your supercharger instead of the restrictive plastice dongle.
All of our radiators are available with either oil coolers or Transmission coolers.
Buy them here;http://www.racespecialtydesigns.com/home.php
Steve
Steve@RaceSpecialtyDesigns.com
05-03-2013, 02:47 PM
#3
Le Mans Master
Thread Starter
Last edited by Steve@RSD; 07-12-2013 at 03:23 PM.
05-08-2013, 12:57 PM
#4
Burning Brakes
Steve,
Do you have a radiator fitment for a 2013 Z06 base model?
Do you recommend just a straight radiator, radiator/oil or radiator/tranny cooler?
Thanks for any info.
Do you have a radiator fitment for a 2013 Z06 base model?
Do you recommend just a straight radiator, radiator/oil or radiator/tranny cooler?
Thanks for any info.
07-13-2013, 08:56 AM
#8
FYI......
It looks like the radiators are using the "sheet metal" locking nuts to secure the EOC lines to the radiator. Ron Davis' radiators use the exact same technique. As a matter of fact, the units in the pics look exactly like a RD radiator (perhaps RD makes these for RSD ??).
Anyway, my RD radiator leaked constantly from these fittings. Changed the gaskets several times, nothing worked. Finally removed the unit and replaced it with a DeWitts. Their radiators have welded bungs for the EOC lines.
End of problem.
It looks like the radiators are using the "sheet metal" locking nuts to secure the EOC lines to the radiator. Ron Davis' radiators use the exact same technique. As a matter of fact, the units in the pics look exactly like a RD radiator (perhaps RD makes these for RSD ??).
Anyway, my RD radiator leaked constantly from these fittings. Changed the gaskets several times, nothing worked. Finally removed the unit and replaced it with a DeWitts. Their radiators have welded bungs for the EOC lines.
End of problem.
11-12-2013, 02:55 PM
#12
Le Mans Master
Thread Starter
Tuesday Bump
View them, price them, and order them right here on our website.
Click on our Logo below;
Steve@RaceSpecialtyDesigns.com
View them, price them, and order them right here on our website.
Click on our Logo below;
Steve@RaceSpecialtyDesigns.com